dotfiles/README.md

dotfiles Read-Me and Roadmap

Quick-Start

There are two ways of using these dotfiles:

To fully provision a completely new arch linux setup

$ curl -Lks http://bit.do/marty-dot | sudo /bin/bash

Or, to only use these dotfiles two steps are necessary

1. install git & zsh if not already installed on your machine (should often already be available)
2. run chsh -s /bin/zsh to switch the shell to zsh
3. go to home directory & run git clone https://gitlab.com/marty-oehme/dotfiles.git df && cp -rf df/.git ~/ && rm -rf df && cd ~ && git checkout -f master
4. install tmux (or remove the corresponding tmux config entries) [this should not be necessary anymore since tmux scripts check for an installation]
5. install a powerline compatible font (nerdfont patched fira code is what I use)

Introduction & Idea

The basic ideas

My Set-Up -- just exchange alias config with alias dotfiles (is already done in the dotfiles)

Examples & Inspiration

holman dotfiles -- dotfiles from the dotfiles-are-meant-to-be-forked dude. Peruse and steal what looks good

LukeSmith dotfiles / LARBS setup, use it for my initial bootstrap

Github does dotfiles, a whole array of dotfile setups to choose from

awesome dotfiles -- way more info on dotfiles than you ever needed

VSCode & Vue focused dotfiles setup -- looks interesting, maybe steal some tidbits

Roadmap

Perfectly setting up Arch

• Fix ReadMe.txt being copied into home dir when cloning dotfiles.
• Re-Map caps lock to ctrl
• Automatically switch between US/DE keyboard layout for laptop/pc this should probably be done with loadkeys and keymap per pc in zshrc or a config derivative see esp https://wiki.archlinux.org/index.php/Linux_console/Keyboard_configuration#Creating_a_custom_keymap so we could load de-latin1/en-us, specified in the branch that is checked out. and then apply a custom keymap over it to apply universal customizations, like Capslock=Control and so on.
• automatically install xcape to enable capslock remapping functionality

Overall Roadmap

• Set up Copy and Paste in X -- using clipmenud&clipnotify. I can copy stuff to and from urxvt w alt+ctrl+c/v, w/o alt for the rest of the system. invoke clipmenu to show last clips.
• [-] Install & Configure Compton Put on hold for now. What do I need it for? transparency? shadows? maybe removing screen-tearing. : Will perhaps re-investigate when i want to use e.g. windowsflash - to highlight the currently active i3 window
• Setup i3
  • Window switching shortcuts
  • Set up leaving question w/o mouse
  • Closing/Opening of windows shortcuts
  • Multi-monitor setup (w/ barrier)
  • Set up initial load of windows to specific screens
• Get Barrier running Barrier by default installs the deps for its GUI (qt5 etc) -- if no GUI is necessary run it with build args to not make GUI (available in aur) : try to get a nicely working setup in the gui in antergos and then copy this to this .file repo, no gui necessary
• [-] Install & Configure rofi Happy with dmenu for now Could use https://github.com/enkore/j4-dmenu-desktop to get a faster menu, independent of i3.
• Install & Configure polybar
  • theme ideas
  • community scripts
• Set up ranger Set up video: https://www.youtube.com/watch?v=L6Vu7WPkoJo
  • set up fzf for ranger
  • set up movement,newtab,copy,move behavior
  • set up visual selection
  • set up tar-ing/untar-ing
• Set up sxiv/feh
• set up (n)vim set jk to get out of modes -> using xcape can accomplish mapping escape to capslock when released on its own. That way we can get out of insert mode with jk AND capslock, whichever we prefer.
• Get Password Sync going (enpass?)
• Set up integrations with my hosted setup
• dmenu script and look see ~10minutes in for automounting using dmenu example
• Set up in the cloud ide and dev environment (gce perhaps)
• Investigate mondo - automatic re-theming (can cycle through multiple themes and reload your .files etc)
• Use tmux for one main editing session. Use a single vim instance within this session. for music, quick exporations etc other urxvt instances are fine? can we use i3 to, when pressing mod+enter, not just open a new term but find out if tmux is running and either open new tmux pane or new term if it is not?
• Look at ack to replace grep (https://beyondgrep.com/why-ack/) -> look at the talk for ideas of customization

Restoration & Atomicity

• Make it possible to get an arch install up and running with the same settings with a couple commands either
  • Set up file system backup to restore from (borg backup)
  • Set up meta-packages & dotfiles to clone from
• Set up ansible to automatically bootstrap Arch for both desktop & laptop

Dotfiles

• Make the dotfiles status command automatically not show untracked files (i.e. most files in homedir) -- fix

ZSH, dotfile installation

• ~

• .zgenrc

• .zshrc

• .zgenrc.d/

• .Xresources

• .xres/

• .config/

• .tmux/

• .zsh/

• .zgen/

• I would like my home folder to be a bit more manageable, ideally it would only contain

  • .zshrc
  • .bashrc
  • .xinitrc
  • .Xresources as files and:
  • .ssh/ -- ssh related configuration -> secret stuff which should not be kept in the repo (an ssh setup script e.g. should be kept in dotfiles if it does not contain keys etc.)
  • .config/ -- program configuration. If it changes how another program on the computer runs, it should go in configuration.
  • .dotfiles/ -- the version history etc of my dotfiles (i.e. handled by git)

• Re-Organize zsh.d/ config files after organizational pattern in .zshrc (e.g. move k-alias script to internal script dependencies)

• Modify larbs setup script to ask for dotfile installation,

• Installation should ask which submodules of programs in csv to install: (should be distinguished somehow, perhaps with tags) as in 'Audio' packages, 'Music' packages, 'xorg' packages, 'Window Manager' packages (maybe use pkg groups?)

• todo command alias to open up a preconfigured todo file OR a todoist cli (if i find a good one) https://github.com/sachaos/todoist looks good. Needs to be synched and works best with peco -- see readme. A working alias set might be useful here to set up commands for interaction Todo Alias opens ROADMAP.md for now.

• readme command alias to open up the current project README.md or ask to create a new one if none is found in current dir / parent dirs

• check for existence of xcape before trying to invoke its command in 5-capslock-to-ctrl

• make :q quit the terminal (perhaps doing alias as exit), :wq save the session in tmux and quit out of it

URxvt

• Enable Ctrl+Arrows to jump back/forward word-wise;
• enable (easy) copy/paste - Ctrl+Shift+C/V? Copy paste works with Alt+Ctrl+C/V, text needs to be selected (only mouse for now) - does not work in tmux yet
• Select text with Shift keys
• enable some sort of command mode a-la vim?
• Unify tab switching -- mod+num for workspaces, alt+num for tabs (in qutebrowser,urxvt,fm,...)
• enable unified copy paste throughout whole system
• enable vim quitting - q to exit session, wq to save as tmux session and quit

mpv

• Enable Seeking with vim controls (hjkl)
• Open file shortcut?
• Set up playlist creation from browser/yt etc https://github.com/mpv-player/mpv/blob/master/TOOLS/umpv will have 'umpv' command be a unique mpv instance for which any additional play item will get appended -> perfect for playists. (see script for more info)

qutebrowser

• Open current page/ hint link in mpv (Ctrl + m / M) https://qutebrowser.org/FAQ.html - commands for settings.
• Make it use umpv script in dotfiles confing to enable playlist queuing.
• Fix for getting stuck in text-field: Either press tab (works sometimes to select next element) or do this https://github.com/qutebrowser/qutebrowser/issues/2668

i3

• Switch to hjkl
• Make custom workspaces: 1 - browser, 2 - term, 9 - agenda, 0 - music
• Superkey to Right Shift
• Alias Capslock to shift - aliased to Ctrl now
• make it work with laptop as 2nd monitor if I switch over to left window from i3, i want to land on the right window of my laptop as the next selection

Various important packages

• i3
• tmux
• pulseaudio (&pavucontrol)
• lightdm, lightdm-mini-greeter
• nvidia, nvidia-utils etc
• xorg-xinit, xorg-server, xorg-apps
• mopidy, mopidy-spotify, mopidy-spotify-tunigo, ncmpcpp
• xcape - to enable capslock to act as control and escape at the same time