Merge remote-tracking branch 'refs/remotes/origin/master'

.config/alacritty/alacritty.yml

@@ -0,0 +1,549 @@
+# Configuration for Alacritty, the GPU enhanced terminal emulator.
+
+# Any items in the `env` entry below will be added as
+# environment variables. Some entries may override variables
+# set by alacritty itself.
+#env:
+  # TERM variable
+  #
+  # This value is used to set the `$TERM` environment variable for
+  # each instance of Alacritty. If it is not present, alacritty will
+  # check the local terminfo database and use `alacritty` if it is
+  # available, otherwise `xterm-256color` is used.
+  #TERM: xterm-256color
+
+window:
+  # Window dimensions (changes require restart)
+  #
+  # Specified in number of columns/lines, not pixels.
+  # If both are `0`, this setting is ignored.
+  dimensions:
+    columns: 0
+    lines: 0
+
+  # Window padding (changes require restart)
+  #
+  # Blank space added around the window in pixels. This padding is scaled
+  # by DPI and the specified value is always added at both opposing sides.
+  padding:
+    x: 2
+    y: 2
+
+  # Spread additional padding evenly around the terminal content.
+  dynamic_padding: false
+
+  # Window decorations
+  #
+  # Values for `decorations`:
+  #     - full: Borders and title bar
+  #     - none: Neither borders nor title bar
+  #
+  # Values for `decorations` (macOS only):
+  #     - transparent: Title bar, transparent background and title bar buttons
+  #     - buttonless: Title bar, transparent background, but no title bar buttons
+  decorations: full
+
+  # When true, alacritty starts maximized.
+  start_maximized: false
+
+scrolling:
+  # Maximum number of lines in the scrollback buffer.
+  # Specifying '0' will disable scrolling.
+  history: 10000
+
+  # Number of lines the viewport will move for every line scrolled when
+  # scrollback is enabled (history > 0).
+  multiplier: 3
+
+  # Faux Scrolling
+  #
+  # The `faux_multiplier` setting controls the number of lines the terminal
+  # should scroll when the alternate screen buffer is active. This is used
+  # to allow mouse scrolling for applications like `man`.
+  #
+  # Specifying `0` will disable faux scrolling.
+  faux_multiplier: 3
+
+  # Scroll to the bottom when new text is written to the terminal.
+  auto_scroll: false
+
+# Spaces per Tab (changes require restart)
+#
+# This setting defines the width of a tab in cells.
+#
+# Some applications, like Emacs, rely on knowing about the width of a tab.
+# To prevent unexpected behavior in these applications, it's also required to
+# change the `it` value in terminfo when altering this setting.
+tabspaces: 8
+
+# Font configuration (changes require restart)
+font:
+  # Normal (roman) font face
+  normal:
+    # Font family
+    #
+    # Default:
+    #   - (macOS) Menlo
+    #   - (Linux) monospace
+    #   - (Windows) Consolas
+    family: Fira Code
+
+    # The `style` can be specified to pick a specific face.
+    #style: Regular
+
+  # Bold font face
+  bold:
+    # Font family
+    #
+    # If the bold family is not specified, it will fall back to the
+    # value specified for the normal font.
+    family: Fira Code
+
+    # The `style` can be specified to pick a specific face.
+    #style: Bold
+
+  # Italic font face
+  italic:
+    # Font family
+    #
+    # If the italic family is not specified, it will fall back to the
+    # value specified for the normal font.
+    family: Fira Code
+
+    # The `style` can be specified to pick a specific face.
+    #style: Italic
+
+  # Point size
+  size: 9.0
+
+  # Offset is the extra space around each character. `offset.y` can be thought of
+  # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
+  offset:
+    x: -2
+    y: 0
+
+  # Glyph offset determines the locations of the glyphs within their cells with
+  # the default being at the bottom. Increasing `x` moves the glyph to the right,
+  # increasing `y` moves the glyph upwards.
+  glyph_offset:
+    x: 0
+    y: 0
+
+  # Thin stroke font rendering (macOS only)
+  #
+  # Thin strokes are suitable for retina displays, but for non-retina screens
+  # it is recommended to set `use_thin_strokes` to `false`
+  #
+  # macOS >= 10.14.x:
+  #
+  # If the font quality on non-retina display looks bad then set
+  # `use_thin_strokes` to `true` and enable font smoothing by running the
+  # following command:
+  #   `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO`
+  #
+  # This is a global setting and will require a log out or restart to take
+  # effect.
+  use_thin_strokes: true
+
+# Display the time it takes to redraw each frame.
+render_timer: false
+
+# Keep the log file after quitting Alacritty.
+persistent_logging: false
+
+# If `true`, bold text is drawn using the bright color variants.
+draw_bold_text_with_bright_colors: false
+# Colors (Iceberg)
+colors:
+  # Default colors
+  primary:
+    background: '0x161821'
+    foreground: '0xd2d4de'
+
+  # Normal colors
+  normal:
+    black:   '0x161821'
+    red:     '0xe27878'
+    green:   '0xb4be82'
+    yellow:  '0xe2a478'
+    blue:    '0x84a0c6'
+    magenta: '0xa093c7'
+    cyan:    '0x89b8c2'
+    white:   '0xc6c8d1'
+
+  # Bright colors
+  bright:
+    black:   '0x6b7089'
+    red:     '0xe98989'
+    green:   '0xc0ca8e'
+    yellow:  '0xe9b189'
+    blue:    '0x91acd1'
+    magenta: '0xada0d3'
+    cyan:    '0x95c4ce'
+    white:   '0xd2d4de'
+  # Dim colors
+  #
+  # If the dim colors are not set, they will be calculated automatically based
+  # on the `normal` colors.
+  #dim:
+  #  black:   '0x000000'
+  #  red:     '0x8c3336'
+  #  green:   '0x7a8530'
+  #  yellow:  '0x97822e'
+  #  blue:    '0x506d8f'
+  #  magenta: '0x80638e'
+  #  cyan:    '0x497e7a'
+  #  white:   '0x9a9a9a'
+
+  # Indexed Colors
+  #
+  # The indexed colors include all colors from 16 to 256.
+  # When these are not set, they're filled with sensible defaults.
+  #
+  # Example:
+  #   `- { index: 16, color: '0xff00ff' }`
+  #
+  indexed_colors: []
+
+# Visual Bell
+#
+# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
+# rung, the terminal background will be set to white and transition back to the
+# default background color. You can control the rate of this transition by
+# setting the `duration` property (represented in milliseconds). You can also
+# configure the transition function by setting the `animation` property.
+#
+# Values for `animation`:
+#   - Ease
+#   - EaseOut
+#   - EaseOutSine
+#   - EaseOutQuad
+#   - EaseOutCubic
+#   - EaseOutQuart
+#   - EaseOutQuint
+#   - EaseOutExpo
+#   - EaseOutCirc
+#   - Linear
+#
+# Specifying a `duration` of `0` will disable the visual bell.
+visual_bell:
+  animation: EaseOutCubic
+  duration: 0
+  color: '0x222220'
+
+# Background opacity
+#
+# Window opacity as a floating point number from `0.0` to `1.0`.
+# The value `0.0` is completely transparent and `1.0` is opaque.
+background_opacity: 0.99
+
+# Mouse bindings
+#
+# Available fields:
+#   - mouse
+#   - action
+#   - mods (optional)
+#
+# Values for `mouse`:
+#   - Middle
+#   - Left
+#   - Right
+#   - Numeric identifier such as `5`
+#
+# All available `mods` and `action` values are documented in the key binding
+# section.
+mouse_bindings:
+  - { mouse: Middle, action: PasteSelection }
+
+mouse:
+  # Click settings
+  #
+  # The `double_click` and `triple_click` settings control the time
+  # alacritty should wait for accepting multiple clicks as one double
+  # or triple click.
+  double_click: { threshold: 300 }
+  triple_click: { threshold: 300 }
+
+  # If this is `true`, the cursor is temporarily hidden when typing.
+  hide_when_typing: false
+
+  url:
+    # URL launcher
+    #
+    # This program is executed when clicking on a text which is recognized as a URL.
+    # The URL is always added to the command as the last parameter.
+    #
+    # When set to `None`, URL launching will be disabled completely.
+    #
+    # Default:
+    #   - (macOS) open
+    #   - (Linux) xdg-open
+    #   - (Windows) explorer
+    #launcher: xdg-open
+
+    # URL modifiers
+    #
+    # These are the modifiers that need to be held down for opening URLs when clicking
+    # on them. The available modifiers are documented in the key binding section.
+    modifiers: None
+
+selection:
+  semantic_escape_chars: ",│`|:\"' ()[]{}<>"
+
+  # When set to `true`, selected text will be copied to the primary clipboard.
+  save_to_clipboard: true
+
+# Allow terminal applications to change Alacritty's window title.
+dynamic_title: true
+
+cursor:
+  # Cursor style
+  #
+  # Values for `style`:
+  #   - ▇ Block
+  #   - _ Underline
+  #   - | Beam
+  style: Beam
+
+  # If this is `true`, the cursor will be rendered as a hollow box when the
+  # window is not focused.
+  unfocused_hollow: true
+
+# Live config reload (changes require restart)
+live_config_reload: true
+
+# Shell
+#
+# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
+# Entries in `shell.args` are passed unmodified as arguments to the shell.
+#
+# Default:
+#   - (Linux/macOS) /bin/bash --login
+#   - (Windows) powershell
+#shell:
+#  program: /bin/bash
+#  args:
+#    - --login
+
+# Windows 10 ConPTY backend (Windows only)
+#
+# This will enable better color support and may resolve other issues,
+# however this API and its implementation is still young and so is
+# disabled by default, as stability may not be as good as the winpty
+# backend.
+#
+# Alacritty will fall back to the WinPTY automatically if the ConPTY
+# backend cannot be initialized.
+enable_experimental_conpty_backend: false
+
+# Send ESC (\x1b) before characters when alt is pressed.
+alt_send_esc: true
+
+# Key bindings
+#
+# Key bindings are specified as a list of objects. Each binding will specify a
+# key and modifiers required to trigger it, terminal modes where the binding is
+# applicable, and what should be done when the key binding fires. It can either
+# send a byte sequence to the running application (`chars`), execute a
+# predefined action (`action`) or fork and execute a specified command plus
+# arguments (`command`).
+#
+# Bindings are always filled by default, but will be replaced when a new binding
+# with the same triggers is defined. To unset a default binding, it can be
+# mapped to the `None` action.
+#
+# Example:
+#   `- { key: V, mods: Control|Shift, action: Paste }`
+#
+# Available fields:
+#   - key
+#   - mods (optional)
+#   - chars | action | command (exactly one required)
+#   - mode (optional)
+#
+# Values for `key`:
+#   - `A` -> `Z`
+#   - `F1` -> `F12`
+#   - `Key1` -> `Key0`
+#
+#   A full list with available key codes can be found here:
+#   https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
+#
+#   Instead of using the name of the keys, the `key` field also supports using
+#   the scancode of the desired key. Scancodes have to be specified as a
+#   decimal number.
+#   This command will allow you to display the hex scancodes for certain keys:
+#     `showkey --scancodes`
+#
+# Values for `mods`:
+#   - Command
+#   - Control
+#   - Super
+#   - Shift
+#   - Alt
+#
+#   Multiple `mods` can be combined using `|` like this: `mods: Control|Shift`.
+#   Whitespace and capitalization is relevant and must match the example.
+#
+# Values for `chars`:
+#   The `chars` field writes the specified string to the terminal. This makes
+#   it possible to pass escape sequences.
+#   To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
+#   the command `showkey -a` outside of tmux.
+#   Note that applications use terminfo to map escape sequences back to
+#   keys. It is therefore required to update the terminfo when
+#   changing an escape sequence.
+#
+# Values for `action`:
+#   - Paste
+#   - PasteSelection
+#   - Copy
+#   - IncreaseFontSize
+#   - DecreaseFontSize
+#   - ResetFontSize
+#   - ScrollPageUp
+#   - ScrollPageDown
+#   - ScrollToTop
+#   - ScrollToBottom
+#   - ClearHistory
+#   - Hide
+#   - Quit
+#   - ClearLogNotice
+#   - SpawnNewInstance
+#   - None
+#
+# Values for `command`:
+#   The `command` field must be a map containing a `program` string and
+#   an `args` array of command line parameter strings.
+#
+#   Example:
+#       `command: { program: "alacritty", args: ["-e", "vttest"] }`
+#
+# Values for `mode`:
+#   - ~AppCursor
+#   - AppCursor
+#   - ~AppKeypad
+#   - AppKeypad
+key_bindings:
+  # (Windows/Linux only)
+  #- { key: V,        mods: Control|Shift, action: Paste            }
+  #- { key: C,        mods: Control|Shift, action: Copy             }
+  #- { key: Insert,   mods: Shift,         action: PasteSelection   }
+  #- { key: Key0,     mods: Control,       action: ResetFontSize    }
+  #- { key: Equals,   mods: Control,       action: IncreaseFontSize }
+  #- { key: Subtract, mods: Control,       action: DecreaseFontSize }
+
+  # (macOS only)
+  #- { key: Key0,   mods: Command, action: ResetFontSize    }
+  #- { key: Equals, mods: Command, action: IncreaseFontSize }
+  #- { key: Minus,  mods: Command, action: DecreaseFontSize }
+  #- { key: K,      mods: Command, action: ClearHistory     }
+  #- { key: K,      mods: Command, chars: "\x0c"            }
+  #- { key: V,      mods: Command, action: Paste            }
+  #- { key: C,      mods: Command, action: Copy             }
+  #- { key: H,      mods: Command, action: Hide             }
+  #- { key: Q,      mods: Command, action: Quit             }
+  #- { key: W,      mods: Command, action: Quit             }
+
+  - { key: Paste,                   action: Paste                            }
+  - { key: Copy,                    action: Copy                             }
+  - { key: L,        mods: Control, action: ClearLogNotice                   }
+  - { key: L,        mods: Control, chars: "\x0c"                            }
+  - { key: Home,                    chars: "\x1bOH",        mode: AppCursor  }
+  - { key: Home,                    chars: "\x1b[H",        mode: ~AppCursor }
+  - { key: End,                     chars: "\x1bOF",        mode: AppCursor  }
+  - { key: End,                     chars: "\x1b[F",        mode: ~AppCursor }
+  - { key: PageUp,   mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
+  - { key: PageUp,   mods: Shift,   chars: "\x1b[5;2~",     mode: Alt        }
+  - { key: PageUp,   mods: Control, chars: "\x1b[5;5~"                       }
+  - { key: PageUp,                  chars: "\x1b[5~"                         }
+  - { key: PageDown, mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
+  - { key: PageDown, mods: Shift,   chars: "\x1b[6;2~",     mode: Alt        }
+  - { key: PageDown, mods: Control, chars: "\x1b[6;5~"                       }
+  - { key: PageDown,                chars: "\x1b[6~"                         }
+  - { key: Tab,      mods: Shift,   chars: "\x1b[Z"                          }
+  - { key: Back,                    chars: "\x7f"                            }
+  - { key: Back,     mods: Alt,     chars: "\x1b\x7f"                        }
+  - { key: Insert,                  chars: "\x1b[2~"                         }
+  - { key: Delete,                  chars: "\x1b[3~"                         }
+  - { key: Left,     mods: Shift,   chars: "\x1b[1;2D"                       }
+  - { key: Left,     mods: Control, chars: "\x1b[1;5D"                       }
+  - { key: Left,     mods: Alt,     chars: "\x1b[1;3D"                       }
+  - { key: Left,                    chars: "\x1b[D",        mode: ~AppCursor }
+  - { key: Left,                    chars: "\x1bOD",        mode: AppCursor  }
+  - { key: Right,    mods: Shift,   chars: "\x1b[1;2C"                       }
+  - { key: Right,    mods: Control, chars: "\x1b[1;5C"                       }
+  - { key: Right,    mods: Alt,     chars: "\x1b[1;3C"                       }
+  - { key: Right,                   chars: "\x1b[C",        mode: ~AppCursor }
+  - { key: Right,                   chars: "\x1bOC",        mode: AppCursor  }
+  - { key: Up,       mods: Shift,   chars: "\x1b[1;2A"                       }
+  - { key: Up,       mods: Control, chars: "\x1b[1;5A"                       }
+  - { key: Up,       mods: Alt,     chars: "\x1b[1;3A"                       }
+  - { key: Up,                      chars: "\x1b[A",        mode: ~AppCursor }
+  - { key: Up,                      chars: "\x1bOA",        mode: AppCursor  }
+  - { key: Down,     mods: Shift,   chars: "\x1b[1;2B"                       }
+  - { key: Down,     mods: Control, chars: "\x1b[1;5B"                       }
+  - { key: Down,     mods: Alt,     chars: "\x1b[1;3B"                       }
+  - { key: Down,                    chars: "\x1b[B",        mode: ~AppCursor }
+  - { key: Down,                    chars: "\x1bOB",        mode: AppCursor  }
+  - { key: F1,                      chars: "\x1bOP"                          }
+  - { key: F2,                      chars: "\x1bOQ"                          }
+  - { key: F3,                      chars: "\x1bOR"                          }
+  - { key: F4,                      chars: "\x1bOS"                          }
+  - { key: F5,                      chars: "\x1b[15~"                        }
+  - { key: F6,                      chars: "\x1b[17~"                        }
+  - { key: F7,                      chars: "\x1b[18~"                        }
+  - { key: F8,                      chars: "\x1b[19~"                        }
+  - { key: F9,                      chars: "\x1b[20~"                        }
+  - { key: F10,                     chars: "\x1b[21~"                        }
+  - { key: F11,                     chars: "\x1b[23~"                        }
+  - { key: F12,                     chars: "\x1b[24~"                        }
+  - { key: F1,       mods: Shift,   chars: "\x1b[1;2P"                       }
+  - { key: F2,       mods: Shift,   chars: "\x1b[1;2Q"                       }
+  - { key: F3,       mods: Shift,   chars: "\x1b[1;2R"                       }
+  - { key: F4,       mods: Shift,   chars: "\x1b[1;2S"                       }
+  - { key: F5,       mods: Shift,   chars: "\x1b[15;2~"                      }
+  - { key: F6,       mods: Shift,   chars: "\x1b[17;2~"                      }
+  - { key: F7,       mods: Shift,   chars: "\x1b[18;2~"                      }
+  - { key: F8,       mods: Shift,   chars: "\x1b[19;2~"                      }
+  - { key: F9,       mods: Shift,   chars: "\x1b[20;2~"                      }
+  - { key: F10,      mods: Shift,   chars: "\x1b[21;2~"                      }
+  - { key: F11,      mods: Shift,   chars: "\x1b[23;2~"                      }
+  - { key: F12,      mods: Shift,   chars: "\x1b[24;2~"                      }
+  - { key: F1,       mods: Control, chars: "\x1b[1;5P"                       }
+  - { key: F2,       mods: Control, chars: "\x1b[1;5Q"                       }
+  - { key: F3,       mods: Control, chars: "\x1b[1;5R"                       }
+  - { key: F4,       mods: Control, chars: "\x1b[1;5S"                       }
+  - { key: F5,       mods: Control, chars: "\x1b[15;5~"                      }
+  - { key: F6,       mods: Control, chars: "\x1b[17;5~"                      }
+  - { key: F7,       mods: Control, chars: "\x1b[18;5~"                      }
+  - { key: F8,       mods: Control, chars: "\x1b[19;5~"                      }
+  - { key: F9,       mods: Control, chars: "\x1b[20;5~"                      }
+  - { key: F10,      mods: Control, chars: "\x1b[21;5~"                      }
+  - { key: F11,      mods: Control, chars: "\x1b[23;5~"                      }
+  - { key: F12,      mods: Control, chars: "\x1b[24;5~"                      }
+  - { key: F1,       mods: Alt,     chars: "\x1b[1;6P"                       }
+  - { key: F2,       mods: Alt,     chars: "\x1b[1;6Q"                       }
+  - { key: F3,       mods: Alt,     chars: "\x1b[1;6R"                       }
+  - { key: F4,       mods: Alt,     chars: "\x1b[1;6S"                       }
+  - { key: F5,       mods: Alt,     chars: "\x1b[15;6~"                      }
+  - { key: F6,       mods: Alt,     chars: "\x1b[17;6~"                      }
+  - { key: F7,       mods: Alt,     chars: "\x1b[18;6~"                      }
+  - { key: F8,       mods: Alt,     chars: "\x1b[19;6~"                      }
+  - { key: F9,       mods: Alt,     chars: "\x1b[20;6~"                      }
+  - { key: F10,      mods: Alt,     chars: "\x1b[21;6~"                      }
+  - { key: F11,      mods: Alt,     chars: "\x1b[23;6~"                      }
+  - { key: F12,      mods: Alt,     chars: "\x1b[24;6~"                      }
+  - { key: F1,       mods: Super,   chars: "\x1b[1;3P"                       }
+  - { key: F2,       mods: Super,   chars: "\x1b[1;3Q"                       }
+  - { key: F3,       mods: Super,   chars: "\x1b[1;3R"                       }
+  - { key: F4,       mods: Super,   chars: "\x1b[1;3S"                       }
+  - { key: F5,       mods: Super,   chars: "\x1b[15;3~"                      }
+  - { key: F6,       mods: Super,   chars: "\x1b[17;3~"                      }
+  - { key: F7,       mods: Super,   chars: "\x1b[18;3~"                      }
+  - { key: F8,       mods: Super,   chars: "\x1b[19;3~"                      }
+  - { key: F9,       mods: Super,   chars: "\x1b[20;3~"                      }
+  - { key: F10,      mods: Super,   chars: "\x1b[21;3~"                      }
+  - { key: F11,      mods: Super,   chars: "\x1b[23;3~"                      }
+  - { key: F12,      mods: Super,   chars: "\x1b[24;3~"                      }
+  - { key: NumpadEnter,             chars: "\n"                              }

.config/bootstrap/packages.csv

@@ -1,34 +0,0 @@
-#TAG,NAME IN REPO (or git url),PURPOSE (should be a verb phrase to sound right while installing)
-,i3-gaps,"is the main graphical user interface and window manager."
-,i3blocks,"is the status bar block provider for i3."
-,xorg-server,"is the graphical server."
-,xorg-xinit,"starts the graphical server."
-,ranger,"is an extensive terminal file manager that everyone likes."
-,dosfstools,"allows your computer to access dos-like filesystems."
-,neovim,"a tidier vim with some useful features"
-,i3blocks,"is the status bar."
-,i3lock,"is the screen lock."
-,mpv,"is the patrician's choice video/gif player."
-,networkmanager,"does exactly what it sounds like."
-,ntfs-3g,"allows accessing NTFS partitions."
-,pulseaudio,"is the audio system (>inb4 bloat)."
-,pulseaudio-alsa,"is an audio interface with ALSA."
-,pulsemixer,"is an intuitive ncurses audio controller."
-,tmux,"is a terminal multiplexer and the dropdown window in LARBS."
-,unrar,"extracts rar's."
-,unzip,"unzips zips."
-,xclip,"allows for copying and pasting from the command line."
-,xdotool,"provides window action utilities on the command line."
-,youtube-dl,"can download any YouTube video (or playlist or channel) when given the link."
-,atool,"manages and gives information about archives."
-,fzf,"is a fuzzy finder tool."
-,zsh,"is a shell alternative to bash."
-A,nerd-fonts-fira-code,"is the mono-space font of choice, patched with embedded icon symbols."
-,qutebrowser,"is a keyboard focused browser with vim-keys enabled."
-,mopidy,"is an extensible music server written in python."
-A,mopidy-spotify,"is a mopidy extension to play music from spotify."
-A,mopidy-scrobbler,"is a mopidy extension to scrobble to last.fm."
-A,mopidy-spotify-tunigo,"is a mopidy extension to enable spotify browsing."
-A,mopidy-podcast,"is a mopidy extension to search and browse podcasts."
-,rxvt-unicode,"is a simple and efficient terminal emulator."
-

.config/i3/config

@@ -32,7 +32,7 @@ font $font
 floating_modifier $mod
 
 # start a terminal
-bindsym $mod+Return exec i3-sensible-terminal
+bindsym $mod+Return exec alacritty #i3-sensible-terminal
 
 # kill focused window
 bindsym $mod+Shift+x kill
@@ -94,10 +94,18 @@ bindsym $mod+a focus parent
 # focus the child container
 #bindsym $mod+d focus child
 
+# disable titles and borders, necessary for i3gaps to work apparently
+for_window [class="^.*"] border pixel 0
+# no gaps if there is only 1 window - I am satisfied with choosing manually
+#smart_gaps on
+# enable / disable gaps (g disables, G enables)
+bindsym $mod+shift+g gaps inner current set 10; gaps outer current set 10
+bindsym $mod+g gaps inner current set 0; gaps outer current set 0
+
 # Define names for default workspaces for which we configure key bindings later on.
 # We use variables to avoid repeating the names in multiple places.
-set $ws1 "1"
+set $ws1 "1:"
-set $ws2 "2"
+set $ws2 "2:"
 set $ws3 "3"
 set $ws4 "4"
 set $ws5 "5"
@@ -162,6 +170,7 @@ bindsym $mod+r mode "resize"
 # Start i3bar to display a workspace bar (plus the system information i3status
 # finds out, if available)
 bar {
+    strip_workspace_numbers yes
     font $font
 	position bottom
 	colors {
@@ -182,3 +191,6 @@ bindsym $mod+Shift+s exec --no-startup-id `[ $(printf "NO\nYES" | dmenu \
     -nf "#7777bb" -i -p "Exit i3 X session?") = "YES" ] && i3-msg exit`
 # lock i3 screen
 bindsym $mod+Shift+p exec i3lock
+
+# set a pretty wallpaper
+exec_always --no-startup-id feh --bg-scale ~/Pictures/wall.jpg

.config/scripts/bin/syu

@@ -0,0 +1 @@
+/usr/bin/topgrade

.config/scripts/bootstrap/install.sh

@@ -5,18 +5,25 @@
 
 ### OPTIONS AND VARIABLES ###
 
-while getopts ":a:r:p:h" o; do case "${o}" in
+# unset our temp variables, just in case they were used for something else in shell
-	h) printf "Optional arguments for custom use:\\n  -r: Dotfiles repository (local file or url)\\n  -p: Dependencies and programs csv (local file or url)\\n  -a: AUR helper (must have pacman-like syntax)\\n  -h: Show this message\\n" && exit ;;
+unset pkgfiles dotfilesrepo targetuser targetpassword targetdeployment quietmode aurhelper loginshell
+
+while getopts ":a:r:f:F:t:s:h" o; do case "${o}" in
+    h) printf "Optional arguments for custom use:\\n  -r: Dotfiles repository (local file or url)\\n  -f: Dependencies and programs csv alongside defaults (local file or url)\\n  -F: Dependencies and programs csv replacing defaults (local file or url)\\n  -a: AUR helper (must have pacman-like syntax), defaults to yay\\n  -t: Target deployment (laptop, desktop, headless, none) to set up relevant package function groups\\n  -s: Default user shell. Must be a full path to the shell (/bin/zsh by default).\n  -h: Show this message\\n" && exit ;;
 	r) dotfilesrepo=${OPTARG} && git ls-remote "$dotfilesrepo" || exit ;;
-	p) progsfile=${OPTARG} ;;
 	a) aurhelper=${OPTARG} ;;
+    f) pkgfiles=${OPTARG} ;;
+    F) pkgfiles=${OPTARG} && exclusivepkgfiles=true ;;
+    t) targetdeployment=${OPTARG} ;;
+    s) loginshell=${OPTARG} ;;
 	*) printf "Invalid option: -%s\\n" "$OPTARG" && exit ;;
 esac done
 
 # DEFAULTS:
 [ -z "$dotfilesrepo" ] && dotfilesrepo="https://gitlab.com/marty-oehme/dotfiles.git"
-[ -z "$progsfile" ] && progsfile="https://gitlab.com/marty-oehme/dotfiles/snippets/1828258/raw"
+[ -z "$pkgfiles" ] && pkgfiles=""
 [ -z "$aurhelper" ] && aurhelper="yay"
+[ -z "$loginshell" ] && loginshell="/bin/zsh"
 
 ### FUNCTIONS ###
 
@@ -57,6 +64,10 @@ adduserandpass() { \
 	echo "$name:$pass1" | chpasswd
 	unset pass1 pass2 ;}
 
+deploydialog() {
+    targetdeployment=$(dialog --title "Deployment Configuration" --radiolist "Select a target package configuration." 0 0 5 desktop "base, network, shell, gui, multimedia, development" on laptop "base, network, shell, gui, multimedia, development, battery, touchpad" off headless "base, network, shell" off none "Installs no packages." off 3>&1 1>&2 2>&3 3>&1) 
+}
+
 refreshkeys() { \
 	dialog --infobox "Refreshing Arch Keyring..." 4 40
 	pacman --noconfirm -Sy archlinux-keyring >/dev/null 2>&1
@@ -97,9 +108,29 @@ aurinstall() { \
 	sudo -u "$name" $aurhelper -S --noconfirm "$1" >/dev/null 2>&1
 	}
 
+# get the link to the package collection
+getpackagegrouplink() {
+    case "$1" in
+        "none") pkggroup="";;
+        "desktop") pkggroup="https://gitlab.com/marty-oehme/dotfiles/snippets/1828258/raw" ;;
+        "laptop") pkggroup="https://gitlab.com/marty-oehme/dotfiles/snippets/1834307/raw" ;;
+        "headless") pkggroup="https://gitlab.com/marty-oehme/dotfiles/snippets/1834308/raw" ;;
+    esac
+}
+
+# can be called with as many csv files filled with packages as necessary
+# appends them all to one temporary file for the installation
+gatherpackages() {
+    concfile=$1
+	shift
+    touch $concfile
+    for progs in "$@"; do
+        ([ -f "$progs" ] && cat "$progs" >> $concfile) || curl -Ls "$progs" | sed '/^#/d' >> $concfile
+    done
+}
+
 installationloop() { \
-	([ -f "$progsfile" ] && cp "$progsfile" /tmp/progs.csv) || curl -Ls "$progsfile" | sed '/^#/d' > /tmp/progs.csv
+	total=$(wc -l < $1)
-	total=$(wc -l < /tmp/progs.csv)
 	aurinstalled=$(pacman -Qm | awk '{print $1}')
 	while IFS=, read -r tag program comment; do
 		n=$((n+1))
@@ -109,7 +140,7 @@ installationloop() { \
 			"A") aurinstall "$program" "$comment" ;;
 			"G") gitmakeinstall "$program" "$comment" ;;
 		esac
-	done < /tmp/progs.csv ;}
+	done < $1 ;}
 
 dotfiles() { \
 	gpath=$1
@@ -126,16 +157,16 @@ putgitrepo() { # Downlods a gitrepo $1 and places the files in $2 only overwriti
 	sudo -u "$name" git clone --bare "$1" "$dir/gitrepo" >/dev/null 2>&1 &&
 	sudo -u "$name" cp -rfT "$dir/gitrepo" $dfdir/.dotfiles
 
-	dotfiles $dfdir checkout
+	sudo -u "$name" dotfiles $dfdir checkout
 	if [ $? = 0 ]; then
 		echo "Checked out dotfiles.";
 	else
 		echo "Backing up existing dotfiles.";
 		mkdir -p $2/.dotfiles-backup
-		dotfiles $dfdir checkout 2>&1 | egrep "\s+\." | awk {'print $1'} | xargs -I{} mv {} $2/.dotfiles-backup/{}
+		sudo -u "$name" dotfiles $dfdir checkout 2>&1 | egrep "\s+\." | awk {'print $1'} | xargs -I{} mv {} $2/.dotfiles-backup/{}
 	fi;
-	dotfiles $dfdir checkout
+	sudo -u "$name" dotfiles $dfdir checkout
-	dotfiles $dfdir config status.showUntrackedFiles no
+	sudo -u "$name" dotfiles $dfdir config status.showUntrackedFiles no
 	}
 
 serviceinit() { for service in "$@"; do
@@ -173,6 +204,11 @@ getuserandpass || error "User exited."
 # Give warning if user already exists.
 usercheck || error "User exited."
 
+# Let user select groups of packages to pre-install.
+if [ -z "$targetdeployment" ]; then
+   deploydialog || error "User exited."
+fi
+
 # Last chance for user to back out before install.
 preinstallmsg || error "User exited."
 
@@ -199,16 +235,31 @@ sed -i "s/-j2/-j$(nproc)/;s/^#MAKEFLAGS/MAKEFLAGS/" /etc/makepkg.conf
 
 manualinstall $aurhelper || error "Failed to install AUR helper."
 
+# the command that sets the correct link to gather our package files from
+# correct link depends on target deployment: desktop, laptop, server,..
+getpackagegrouplink $targetdeployment
+
+# append the default packages to whatever custom package csv links were passed in or 
+# only use the custom packages if forced with -F
+[ ! "$exclusivepkgfiles" ] && pkgfiles="$(curl -Ls $pkggroup | cat ) $pkgfiles"
+
+tmpfile=/tmp/pkgs.csv
+# actually gather the individual package installation lines from the various links and files
+gatherpackages $tmpfile $pkgfiles
+
 # The command that does all the installing. Reads the progs.csv file and
 # installs each needed program the way required. Be sure to run this only after
-# the user has been created and has priviledges to run sudo without a password
+# the user has been created and has privileges to run sudo without a password
 # and all build dependencies are installed.
-installationloop
+installationloop $tmpfile
 
 # Install the dotfiles in the user's home directory
 putgitrepo "$dotfilesrepo" "/home/$name"
 rm "/home/$name/README.md" 
 
+# Set user login shell to desired shell - usually zsh
+chsh -s $loginshell $name
+
 # Pulseaudio, if/when initially installed, often needs a restart to work immediately.
 [ -f /usr/bin/pulseaudio ] && resetpulse
 

.config/scripts/bootstrap/pkg/base.csv

@@ -0,0 +1,3 @@
+,ntfs-3g,"allows accessing NTFS partitions."
+,dosfstools,"allows your computer to access dos-like filesystems."
+,topgrade,"tries to be your universal updater running everything in one go."

.config/scripts/bootstrap/pkg/dev.csv

@@ -0,0 +1,5 @@
+,code,"is an open source gui code editor in the style of atom/sublime - but better."
+,vagrant,"is a development environment provisioning system which easily spins up virtual machines for you."
+,virtualbox,"is a virtual machine framework which is mainly used by vagrant."
+,docker,"should need no introduction, but allows you to run everything in a container."
+,docker-compose,"allows you to run many, many containers much more easily."

.config/scripts/bootstrap/pkg/media.csv

@@ -0,0 +1,11 @@
+,pulseaudio,"is the audio system (>inb4 bloat)."
+,pulseaudio-alsa,"is an audio interface with ALSA."
+,pulsemixer,"is an intuitive ncurses audio controller."
+,mopidy,"is an extensible music server written in python."
+,ncmpcpp,"is a client for the mopidy music server (or, optionally, for mpd)"
+A,mopidy-spotify,"is a mopidy extension to play music from spotify."
+A,mopidy-scrobbler,"is a mopidy extension to scrobble to last.fm."
+A,mopidy-spotify-tunigo,"is a mopidy extension to enable spotify browsing."
+A,mopidy-podcast,"is a mopidy extension to search and browse podcasts."
+,mpv,"is the patrician's choice video/gif player."
+,youtube-dl,"can download any YouTube video (or playlist or channel) when given the link."

.config/scripts/bootstrap/pkg/network.csv

@@ -0,0 +1,2 @@
+,networkmanager,"does exactly what it sounds like."
+,openssh,"allows using ssh connections to connect to others or be connected to."

.config/scripts/bootstrap/pkg/shell.csv

@@ -0,0 +1,8 @@
+,zsh,"is a shell alternative to bash."
+,tmux,"is a terminal multiplexer and the dropdown window in LARBS."
+,neovim,"a tidier vim with some useful features"
+,ranger,"is an extensive terminal file manager that everyone likes."
+,fzf,"is a fuzzy finder tool."
+,unrar,"extracts rar's."
+,unzip,"unzips zips."
+,atool,"manages and gives information about archives."

.config/scripts/bootstrap/pkg/testing.csv

@@ -0,0 +1,6 @@
+#TAG,NAME IN REPO (or git url),PURPOSE (should be a verb phrase to sound right while installing)
+A,enpass-bin,"is a cross-platform personal password manager with gui."
+,gtk3,"is a gui toolkit, necessary for enpass-bin to work. (enpass forgets to install it)"
+,compton,"is a compositor for X that works well with i3."
+A,flashfocus,"is a simple toll that flashes any window which gains focus."
+,feh,"is a simple image viewer. Unfortunately it does not play well with tiled windows."

.config/scripts/bootstrap/pkg/x.csv

@@ -0,0 +1,14 @@
+,xorg-server,"is the graphical server."
+,xorg-xinit,"starts the graphical server."
+,xorg-xauth,"manages X authentication settings."
+,xclip,"allows for copying and pasting from the command line."
+,xdotool,"provides window action utilities on the command line."
+,xcape,"allows using keys for different things whether pressed on their own or with others. For example, map capslock to escape."
+,i3-gaps,"is the main graphical user interface and window manager."
+,i3blocks,"is the status bar block provider for i3."
+,i3status,"is the status bar for i3."
+,i3lock,"is the i3 screen lock provider."
+A,j4-dmenu-desktop,"is a faster dmenu replacement, the application launcher of the i3 suite."
+A,nerd-fonts-fira-code,"is the mono-space font of choice, patched with embedded icon symbols."
+,alacritty,"is an efficient, unicode compatible terminal emulator."
+,qutebrowser,"is a keyboard focused browser with vim-keys enabled."

.config/tmux/tmux.conf

@@ -50,13 +50,11 @@ set -ga terminal-overrides '*:Ss=\E[%p1%d q:Se=\E[ q'
 #run-shell ~/.tmux-plugins/resurrect/resurrect.tmux
 set -g @plugin 'tmux-plugins/tpm'
 set -g @plugin 'tmux-plugins/tmux-sensible'
-# Recently removed due to causing too many incompatibilities with how I want it set up
-#set -g @plugin 'tmux-plugins/tmux-pain-control'
 set -g @plugin 'tmux-plugins/tmux-yank'
 set -g @plugin 'tmux-plugins/tmux-prefix-highlight'
 set -g @plugin 'Morantron/tmux-fingers'
 
-run -b "${TMUX_PLUGIN_MANAGER_PATH}/tpm/tpm"
+run "${TMUX_PLUGIN_MANAGER_PATH}/tpm/tpm"
 
 #####################
 ## 3. KEYBINDINGS  ##

.config/zsh/0-dotfiles-version-control-commands.zsh

@@ -1,5 +1,5 @@
-# enables git management through dotfiles command
+# enables git management through dot command
-alias dotfiles='/usr/bin/git --git-dir=/home/marty/.dotfiles/ --work-tree=/home/marty'
+alias dot='/usr/bin/git --git-dir=/home/marty/.dotfiles/ --work-tree=/home/marty'
 
 # The following commands are run on your git repo if you installed through the script
 # You can invoke them manually, but it's not recommended to keep them active in here.
@@ -16,8 +16,8 @@ alias dotfiles='/usr/bin/git --git-dir=/home/marty/.dotfiles/ --work-tree=/home/
 # Read more: https://stackoverflow.com/questions/4308610/how-to-ignore-certain-files-in-git
 # and: https://stackoverflow.com/questions/653454/how-do-you-make-git-ignore-files-without-using-gitignore
 #
-#dotfiles update-index --no-assume-unchanged README.md
+#dot update-index --no-assume-unchanged README.md
-#dotfiles update-index --assume-unchanged README.md
+#dot update-index --assume-unchanged README.md
 
 ## Make git not show untracked files (i.e. ALL other files in your home dir)
-#dotfiles config status.showUntrackedFiles no
+#dot config status.showUntrackedFiles no

.config/zsh/5-install-tmux-plugin-manager.zsh

@@ -1,6 +1,6 @@
 # Clone tmux plugin manager if not existing
 if [[ -z "$TPM_PARENT_DIR" ]]; then
-  TPM_PARENT_DIR=${XDG_CONFIG_DIR:-$HOME/.config}/tmux
+  TPM_PARENT_DIR=${XDG_CONFIG_HOME:-$HOME/.config}/tmux
 fi
 
 if [[ ! -f $TPM_PARENT_DIR/plugins/tpm/tpm ]]; then

.profile

@@ -1,5 +1,4 @@
-export XDG_CONFIG_DIR="$HOME/.config"
+export XDG_CONFIG_HOME="$HOME/.config"
-export XDG_CONFIG_HOME=$XDG_CONFIG_DIR
 export XDG_CACHE_HOME="$HOME/.cache"
  
 export EDITOR=nvim

.xinitrc

@@ -48,4 +48,9 @@ setxkbmap -option terminate:ctrl_alt_bksp
 # Needs xcape package installed. https://github.com/alols/xcape
 type xcape >/dev/null 2>&1 && xcape -e 'Control_L=Escape'
 
+# if compton exists then we can start it as our compositor
+type compton >/dev/null 2>&1 && compton &
+# same deal with flashfocus as our active window indicator
+type flashfocus >/dev/null 2>&1 && flashfocus &
+
 type i3 >/dev/null 2>&1 && exec i3

.zshrc

@@ -15,6 +15,8 @@
 #
 ####
 
+autoload zmv
+
 ## Show debug information
 #
 # ZSH_SETUP_SHOW_DEBUG="true"
@@ -29,7 +31,7 @@ print_dbg() {
 # Clone zgen if you haven't already
 check_zgen_installation() {
   if [[ -z "$ZGEN_PARENT_DIR" ]]; then
-    ZGEN_PARENT_DIR=${${XDG_CONFIG_DIR}:="$HOME/.config/"}
+    ZGEN_PARENT_DIR=${${XDG_CONFIG_HOME}:="$HOME/.config/"}
     ZGEN_DIR="$ZGEN_PARENT_DIR/zgen"
   fi
   if [[ ! -f $ZGEN_DIR/zgen.zsh ]]; then
@@ -90,9 +92,9 @@ load_config_files() {
 
 # Set ZSH_CONFIG_DIR to default to ~/.config/zsh, or let user override
 # Exit early if no configuration directory has been found
-if [ ! -d ${ZSH_CONFIG_DIR:="${XDG_CONFIG_DIR:-$HOME/.config}/zsh"} ]; then
+if [ ! -d ${ZSH_CONFIG_DIR:="${XDG_CONFIG_HOME:-$HOME/.config}/zsh"} ]; then
   # If the user explicitly overrode the path give him an error
-  if [ ! $ZSH_CONFIG_DIR = "${XDG_CONFIG_DIR:-$HOME/.config/}/zsh" ]; then
+  if [ ! $ZSH_CONFIG_DIR = "${XDG_CONFIG_HOME:-$HOME/.config/}/zsh" ]; then
     printf "\$ZSH_CONFIG_DIR=$ZSH_CONFIG_DIR/ does not exist.\n"
   fi
   PS1="$HOME $ "
@@ -144,7 +146,7 @@ load_config_files $ZSH_CONFIG_DIR 3456789
 # fi
 
 # put personal scripts on the PATH to be callable
-export PATH="$(du $ZSH_CONFIG_DIR/scripts/ | cut -f2 | tr '\n' ':')$PATH"
+export PATH="$(du $XDG_CONFIG_HOME/scripts/bin | cut -f2 | tr '\n' ':')$PATH"
 
 unset ZSH_CONFIG_DIR
 # unset ZGEN_DIR -- Needs to remain set for some plugins to function

README.md

@@ -35,6 +35,10 @@ Or, to **only** use these dotfiles two steps are necessary
 
 [VSCode & Vue focused dotfiles setup](https://github.com/sobolevn/dotfiles) -- looks interesting, maybe steal some tidbits
 
+[Various tidbits and aliases](https://github.com/ahmedelgabri/talks/blob/master/cli-and-git/cli-and-git.md)
+
+[dotfiles from the author of above link](https://github.com/ahmedelgabri/dotfiles)
+
 # Roadmap
 
 ## Perfectly setting up Arch