sh: Add simple sc-im alias

Added `sc` as alias for sc-im since typing the dash every time is
cumbersome.

.githooks/prepare-commit-msg

@@ -4,7 +4,7 @@ COMMIT_MSG_FILE="$1"
 COMMIT_SOURCE="$2"
 
 BOOTSTRAPDIR="bootstrap"
-pkg_committed="$(cat $(git rev-parse --show-toplevel)/$BOOTSTRAPDIR/packages.tsv | tail +2 | cut -f1 | sort)"
+pkg_committed="$(cat "$(git rev-parse --show-toplevel)"/$BOOTSTRAPDIR/packages*.tsv | grep -v -e '^Name	Description	Source	Target' | cut -f1 | sort)"
 pkg_onsystem=$(pacman -Qqett | grep -v "$(pacman -Qqg base-devel)" | sort)
 
 # get files only in repo, and only on machine

README.md

@@ -22,11 +22,17 @@ The current dotfiles are geared toward wayland for which the setup looks similar
 
 The dotfiles use `GNU stow` to link themselves in the home directory. You can clone this repository anywhere (though I have mine in `~/.dotfiles` as it seemed most logical for me).
 
-I would recommend doing a `git clone --recursive` for this repository, since it contains git [submodules](https://nering.dev/2016/git-submodules-vs-subtrees/), which will then automatically get pulled in as well. Of course, you can do it non-recursively and then just pull those modules selectively which you actually want.
+I would recommend doing an initial `git clone --recursive` for this repository, since it contains git [submodules](https://nering.dev/2016/git-submodules-vs-subtrees/), which will then automatically get pulled in as well.
+Of course, you can do it non-recursively and then just pull those modules selectively which you actually want.
 
 Once in the repository directory, when you then run `./install.sh` it will install many of the packages I use (though they are probably slightly out-of-date) and link the dotfiles into the home directory.
-If you do not want to install any packages, but only link the dotfiles run `stow -S */` from the main repository directory.
-Since dotfiles management is based on `stow`, it will not overwrite anything already in the home directory (though you can force it to if you really want, using `stow --override='.*'` -- I do not recommend this).
+I would mostly recommend this on fresh machines or a test machine first - it *will* link my personal dotfiles and, if you allow it, *will* install quite a few packages.
+By default it will ask your consent for some steps -- use `./install.sh -f` to force yes to everything.
+
+The dotfile installation procedure is based on `stow`, it will *not overwrite* anything already in the home directory (though you can force it to if you really want, using `stow --override='.*'` -- I do not recommend this).
+
+> **NOTE**
+> The same non-destructive installation procedure does *not* apply to the package installation and system setting file linking, where it can potentially overwrite or remove existing files.
 
 After all files are linked and you open a new shell session, the `dotlink` alias will allow you to re-link all dotfiles from anywhere on the system.[^1]
 

bootstrap/Dockerfile

@@ -0,0 +1,22 @@
+FROM archlinux:latest
+
+# First build then run this dockerfile with:
+# `podman build -t bootstrap .`
+# `podman run -it -v /path/to/my/dotfiles:/path/to/my/dotfiles:ro bootstrap`
+
+RUN pacman-key --init
+RUN pacman -Syu --noconfirm git vi base-devel sudo zsh man man-pages
+
+RUN useradd -m -G wheel -s /usr/bin/zsh marty
+RUN echo "%wheel    ALL=(ALL:ALL) ALL" >> /etc/sudoers
+RUN echo "marty:password" | chpasswd
+
+# RUN su marty
+# RUN cd /home/marty
+# RUN git clone "https://git.martyoeh.me/Marty/dotfiles" .dotfiles
+# link it directly from dotfile development dir to experiment
+
+USER marty
+VOLUME /home/marty/.dotfiles
+WORKDIR /home/marty/.dotfiles
+CMD ["/usr/bin/bash"]

bootstrap/install_packages.sh

@@ -7,7 +7,9 @@
 # DESCRIPTION:  Display usage information for this script.
 # PARAMETERS:   see usage function
 #==============================================================================
-packages="${BOOTSTRAP_PACKAGES:-packages.txt}"
+PKG_TSV_FILE=${PKG_TSV_FILE:-bootstrap/packages.tsv}
+packages_repo="${BOOTSTRAP_PACKAGES:-$(grep -e '	R	' "$PKG_TSV_FILE" | cut -f1 -d'	' )}"
+packages_aur="${BOOTSTRAP_PACKAGES_AUR:-$(grep -e '	A	' "$PKG_TSV_FILE" | cut -f1 -d'	' )}"
 
 main() {
     local cmd=""
@@ -60,27 +62,16 @@ update_repos() {
 install_packages() {
     unattended="$1"
     if "$unattended"; then
-        yay -Squ --noconfirm --needed - <"$packages"
+        echo "$packages_repo" "$packages_aur" | yay -Squ --noconfirm --needed -
     else
-        yay -Su --needed - <"$packages"
-    fi
-}
-
-check_consent() {
-    echo "This will take a while and install many packages. Proceed [y/N]?"
-    read -r yes
-    if [[ "$yes" != y* ]]; then
-        echo "Exiting."
-        exit
+        echo "$packages_repo" | yay -Squ --needed -
+        echo "$packages_aur" | yay -S --needed -
     fi
 }
 
 install() {
     unattended=$1
     echo "Beginning package bootstrap ..............................................."
-    if ! "$unattended"; then
-        check_consent
-    fi
     echo "Installing yay ............................................................"
     install_yay
     echo "Installing apps ..........................................................."

bootstrap/packages_stable.tsv

@@ -69,7 +69,6 @@ ffmpegthumbnailer	Lightweight video thumbnailer that can be used by file manager
 firefox	Standalone web browser from mozilla.org	R	
 fonts-cjk	Linux 下的免费商用字体包	A	
 freerdp	Free implementation of the Remote Desktop Protocol (RDP)	R	
-fvextra	Extensions to fancyvrb, including automatic line breaking and improved math mode	R	
 fwupd	Simple daemon to allow session software to update firmware	R	
 fzf-tab-bin-git	Replace zsh's default completion selection menu with fzf (git version). This package also compiles the optional binary module.	A	
 gallery-dl	Command-line program to download image-galleries and collections from several image hosting sites	A	
@@ -107,7 +106,6 @@ iputils	Network monitoring tools, including ping	R
 ipython	An enhanced Interactive Python shell.	R	
 iucode-tool	Tool to manipulate Intel® IA-32/X86-64 microcode bundles	R	
 iwd	Internet Wireless Daemon	R	
-jabref-latest	GUI frontend for BibTeX, written in Java; latest main (master) version from git	A	
 jiq-bin	Interactive JSON query tool using jq expressions	A	
 jmtpfs	FUSE and libmtp based filesystem for accessing MTP (Media Transfer Protocol) devices	A	
 jpdftweak	A Swiss Army Knife GUI application for PDF documents	A	
@@ -147,6 +145,7 @@ maim	Utility to take a screenshot using imlib2	R
 mako	Lightweight notification daemon for Wayland	R	
 man-db	A utility for reading man pages	R	
 man-pages	Linux man pages	R	
+markdownlint-cli	MarkdownLint Command Line Interface	A	
 masterpdfeditor-free	A complete solution for creation and editing PDF files - Free version without watermark	A	
 mbsync-git	free (GPL) mailbox synchronization program	A	
 mediainfo	Supplies technical and tag information about a video or audio file (CLI interface)	R	
@@ -183,7 +182,6 @@ newsboat	RSS/Atom feed reader for text terminals	R
 nextcloud-client	Nextcloud desktop client	R	
 nfs-utils	Support programs for Network File Systems	R	
 nmap	Utility for network discovery and security auditing	R	
-nodejs-markdownlint-cli	MarkdownLint Command Line Interface	A	
 nodejs-pandiff	Prose diffs for any document format supported by Pandoc	A	
 noto-fonts-emoji	Google Noto emoji fonts	R	
 npm	A package manager for javascript	R	
@@ -312,12 +310,13 @@ vagrant	Build and distribute virtualized development environments	R
 vale-bin	A customizable, syntax-aware linter for prose	A	
 vdirsyncer	Synchronize CalDAV and CardDAV.	R	
 viddy	A modern watch command	A	
-vifm-git	Ncurses based file manager with vi like keybindings	A	
+vifm	A file manager with curses interface, which provides Vi[m]-like environment	R	
 vim-language-server	VimScript language server	A	
 virt-manager	Desktop user interface for managing virtual machines	R	
 virtualbox	Powerful x86 virtualization for enterprise as well as home use	R	
 virtualbox-guest-iso	The official VirtualBox Guest Additions ISO image	R	
 visidata	Terminal spreadsheet multitool for discovering and arranging data	R	
+wallabag-client	Command line client for the self hosted read-it-later app Wallabag	A	
 wavemon	Ncurses-based monitoring application for wireless network devices	R	
 waybar	Highly customizable Wayland bar for Sway and Wlroots based compositors	R	
 waylock-git	A simple screenlocker for Wayland compositors	A	

bootstrap/packages_testing.tsv

@@ -0,0 +1,7 @@
+Name	Description	Source	Target
+most	A terminal pager similar to 'more' and 'less'	R	
+netbird-bin	A WireGuard-based mesh network that connects your devices into a single private network	A	
+odysseyra1n	Bootstraps Procursus and install Sileo/libhooker on devices jailbroken with checkra1n.	A	
+shadow-tech	Desktop client for Shadow Tech cloud gaming service.	A	
+signal-desktop	Signal Private Messenger for Linux	R	
+vifm	A file manager with curses interface, which provides Vi[m]-like environment	R	

bootstrap/system-packages/etc/pacman.conf

@@ -0,0 +1,100 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+UseSyslog
+Color
+#NoProgressBar
+CheckSpace
+VerbosePkgLists
+ParallelDownloads = 5
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs

bootstrap/update_package_list.sh

@@ -1,16 +1,18 @@
 #!/usr/bin/env bash
-BOOTSTRAP_DIR=~/.dotfiles/bootstrap
-OUTPUT=${BOOTSTRAP_DIR}/packages.tsv
+BOOTSTRAP_DIR=${BOOTSTRAP_DIR:-$(pwd)/bootstrap}
+INPUTFILES=$(find "${BOOTSTRAP_DIR}" -type f -name 'packages*.tsv')
+OUTPUTFILE=${BOOTSTRAP_DIR}/packages_testing.tsv
 
 pkg_all=$(pacman -Qqett | grep -v "$(pacman -Qqg base-devel)")
 
 pkg_repo=$(pacman -Qqn)
 pkg_aur=$(pacman -Qqm)
 
-while getopts "nvh" opt; do
+while getopts "nvhf:" opt; do
     case "$opt" in
     n) DRYRUN=true ;;
     v) VERBOSE=true ;;
+    f) OUTPUTFILE="$OPTARG" ;;
     h | *)
         {
             printf "\nUpdate the list of installed packages.\n\nWill compare packages committed to the dotfile repository\nand those currently installed (on an Arch system, using pacman).\nUpdates the list of committed packages in repository\nand prints out the differences as a diff.\n\nOptions:\n\n\t-h\tDisplay this help.\n\t-v\tShow verbose information.\n\t-n\tPrint out changes without changing anything (dry-run).\n"
@@ -20,6 +22,13 @@ while getopts "nvh" opt; do
     esac
 done
 
+# get all existing written packages
+if [ -n "$INPUTFILES" ]; then
+    INPUT=$(cat $INPUTFILES | grep -v -e '^Name	Description	Source	Target' | sort)
+else
+    INPUT=""
+fi
+
 print_msg() {
     # shellcheck disable=2059
     [ -n "$VERBOSE" ] && printf "$@"
@@ -29,10 +38,10 @@ print_msg() {
 # packagename, description, source, target
 # toot  a toot manager  A   D
 
-if [ -f "${OUTPUT}_TEMP" ]; then
-    rm "${OUTPUT}_TEMP"
+if [ -f "${OUTPUTFILE}_TEMP" ]; then
+    rm "${OUTPUTFILE}_TEMP"
 fi
-touch "${OUTPUT}_TEMP"
+touch "${OUTPUTFILE}_TEMP"
 
 # create new package list
 for pkg in $pkg_all; do
@@ -52,9 +61,7 @@ for pkg in $pkg_all; do
     desc="${desc#"${desc%%[![:space:]]*}"}"
 
     target=""
-    if [ -f "$OUTPUT" ]; then
-        found_line=$(grep -e "^$pkg" "$OUTPUT")
-    fi
+    found_line=$(echo "$INPUT" | grep -e "^$pkg")
     if [ -n "$found_line" ]; then
         target=$(echo "$found_line" | cut -f4)
         print_msg "Updating pkg: %s:%s from: %s, for: %s\n" "$pkg" "$desc" "$source" "$target"
@@ -62,26 +69,29 @@ for pkg in $pkg_all; do
         print_msg "Adding pkg: %s:%s from: %s, for: %s\n" "$pkg" "$desc" "$source" "$target"
     fi
 
-    printf "%s\t%s\t%s\t%s\n" "$pkg" "$desc" "$source" "$target" >>"${OUTPUT}_TEMP"
+    printf "%s\t%s\t%s\t%s\n" "$pkg" "$desc" "$source" "$target" >>"${OUTPUTFILE}_TEMP"
 done
 
 # notify on any removed packages
-if [ -f "$OUTPUT" ]; then
-    while read -r line; do
-        if ! echo "$line" | cut -f1 | xargs -I _ grep -F -q -x _ <(echo "$pkg_all"); then
-            printf "REMOVED: %s\n" "$line"
-        fi
-    done <<<"$(tail +2 $OUTPUT)"
-fi
+while read -r line; do
+    if ! echo "$line" | cut -f1 | xargs -I _ grep -F -q -x _ <(echo "$pkg_all"); then
+        printf "REMOVED: %s\n" "$line"
+    fi
+done <<<"<(echo $INPUT | tail +2)"
 
 # show file changes
-if [ -f "$OUTPUT" ] && [ -f "$OUTPUT"_TEMP ]; then
-    changes=$(diff --color=always -y --suppress-common-lines "$OUTPUT" "$OUTPUT"_TEMP | tail -n+2)
+if [ -f "$OUTPUTFILE"_TEMP ]; then
+    changes=$(diff --color=always -y --suppress-common-lines <(echo "$INPUT") <(sort "$OUTPUTFILE"_TEMP | tail -n+2))
     printf "FILE CHANGES:\n=============\n%s" "$changes"
 fi
 
-# actually write to file
+# actually write changes to file
 if [ -z "$DRYRUN" ]; then
-    cat <(printf "Name\tDescription\tSource\tTarget\n") "${OUTPUT}_TEMP" >"$OUTPUT"
+
+    while IFS= read -r line; do
+        sed -i -e "/^${line//\//\\/}$/d" "$OUTPUTFILE"_TEMP
+    done <<< "$INPUT"
+
+    cat <(printf "Name\tDescription\tSource\tTarget\n") "${OUTPUTFILE}_TEMP" > "$OUTPUTFILE"
 fi
-rm "${OUTPUT}_TEMP"
+rm "${OUTPUTFILE}_TEMP"

install.sh

@@ -43,13 +43,12 @@ check_consent() {
         true
     else
         [[ "$1" == "y" ]] && default_consent="[Y/n]" || default_consent="[y/N]"
-        printf "%s %s " "$2" "$default_consent"
+        printf "%b %b " "$2" "$default_consent"
         read -r answer
         if [[ "$1" == "n" ]] && [[ "$answer" != y* ]]; then
             printf "%s\n" "$3"
             false
         elif [[ "$1" == "y" ]] && [[ "$answer" == n* ]]; then
-            echo second
             printf "%s\n" "$3"
             false
         else
@@ -59,7 +58,7 @@ check_consent() {
 }
 
 entry_question() {
-    check_consent n "This will take a while, install many packages and link dotfiles all over the place. Proceed?" "Aborting." || exit
+    check_consent n "This will take a while and install many packages and link dotfiles all over the place depending on your selections.\nYou need to be in the base directory of the dotfiles repository.\nProceed?" "Aborting." || exit
 }
 
 enable_git_hooks() {
@@ -80,21 +79,30 @@ stow_dotfiles() {
     echo "Linked dotfiles."
 }
 
+run_elevated() {
+    if command -v doas >/dev/null 2>&1; then
+        doas "$@"
+    elif command -v sudo >/dev/null 2>&1; then
+        sudo "$@"
+    fi
+}
+
 stow_system_packages() {
-    check_consent n "Link system settings as well? This will require sudo access." "Not touching system files." || return
-    sudo stow --dir="$bootstrap_dir" --target="/" -R system-packages/
+    check_consent n "Link system settings files? This will require sudo access and may overwrite existing files." "Not touching system files." || return
+    if [ -e "/etc/pacman.conf" ]; then
+        check_consent n "Found an existing pacman.conf file, installation will error if it exists. Remove file?" && run_elevated rm "/etc/pacman.conf"
+    fi
+    run_elevated stow --dir="$bootstrap_dir" --target="/" -R system-packages/
     echo "Linked system files."
 }
 
 install_packages() {
-    check_consent n "Install pre-designated packages? This will take a while." "Not installing packages." || return
-    export BOOTSTRAP_PACKAGES="bootstrap/packages.txt"
+    check_consent n "Install pre-designated packages? This will take a while, install a lot of packages and require super user privileges." "Not installing packages." || return
     if ! "$UNATTENDED"; then
         "$bootstrap_dir"/install_packages.sh
     else
         "$bootstrap_dir"/install_packages.sh -f
     fi
-    unset BOOTSTRAP_PACKAGES
     echo "Installed packages."
 }
 
@@ -104,12 +112,14 @@ install() {
         entry_question
     fi
 
-    echo "====================== BEGINNING INSTALLATION ============================="
+    echo "====================== BEGINNING SYSTEM FILE MANAGEMENT ============================="
+    stow_system_packages
+
+    echo "====================== BEGINNING PACKAGE INSTALLATION ============================="
     install_packages
 
     echo "=================== BEGINNING DOTFILE MANAGEMENT =========================="
     stow_dotfiles
-    stow_system_packages
 
     echo "================== ENABLING GIT REPOSITORY HOOKS =========================="
     enable_git_hooks

nvim/.config/nvim/lua/plug/_cmp.lua

@@ -68,14 +68,17 @@ cmp.setup({
     },
     sources = cmp.config.sources({
         { name = 'path' }, { name = 'nvim_lsp' }, { name = 'treesitter' },
-        { name = 'tmux' }, { name = 'vsnip' }, { name = 'latex_symbols' },
-        { name = 'vCard' }, { name = 'nvim_lua' }
+        { name = 'cmp_pandoc' }, { name = 'tmux' }, { name = 'vsnip' },
+        { name = 'latex_symbols' }, { name = 'vCard' }, { name = 'nvim_lua' }
     }, { { name = 'buffer' }, { name = 'spell' } })
 })
 
 if vim.o.ft == 'clap_input' and vim.o.ft == 'guihua' and vim.o.ft ==
     'guihua_rust' then require 'cmp'.setup.buffer { completion = { enable = false } } end
 
+-- set up pandoc bibtex source generation
+require 'cmp_pandoc'.setup()
+
 -- Use buffer source for `/` search
 cmp.setup.cmdline('/', {
     mapping = cmp.mapping.preset.cmdline(),

nvim/.config/nvim/lua/plugins.lua

@@ -1,8 +1,12 @@
 local ensure_packer = function()
     local fn = vim.fn
-    local install_path = fn.stdpath('data') .. '/site/pack/packer/start/packer.nvim'
+    local install_path = fn.stdpath('data') ..
+                             '/site/pack/packer/start/packer.nvim'
     if fn.empty(fn.glob(install_path)) > 0 then
-        fn.system({ 'git', 'clone', '--depth', '1', 'https://github.com/wbthomason/packer.nvim', install_path })
+        fn.system({
+            'git', 'clone', '--depth', '1',
+            'https://github.com/wbthomason/packer.nvim', install_path
+        })
         vim.cmd [[packadd packer.nvim]]
         return true
     end
@@ -12,11 +16,11 @@ end
 local packer_bootstrap = ensure_packer()
 
 -- Compile on plugin edits
-vim.api.nvim_create_autocmd({ "BufWritePost" }, {
+vim.api.nvim_create_autocmd({"BufWritePost"}, {
     pattern = "plugins.lua",
     command = "PackerCompile",
     desc = "Compile plugins after editing plugin list",
-    group = vim.api.nvim_create_augroup('compilepackages', { clear = true })
+    group = vim.api.nvim_create_augroup('compilepackages', {clear = true})
 })
 
 local use = require("packer").use
@@ -38,7 +42,7 @@ require("packer").startup(function()
     use 'vifm/vifm.vim' -- integrate file manager
     use {
         'lewis6991/gitsigns.nvim', -- show vcs changes on left-hand gutter
-        requires = { 'nvim-lua/plenary.nvim' },
+        requires = {'nvim-lua/plenary.nvim'},
         tag = 'release',
         config = function() require('plug._gitsigns') end,
         event = "BufRead"
@@ -94,26 +98,26 @@ require("packer").startup(function()
     -- statusline
     use {
         'nvim-lualine/lualine.nvim',
-        requires = { 'kyazdani42/nvim-web-devicons', opt = true },
+        requires = {'kyazdani42/nvim-web-devicons', opt = true},
         config = function() require('plug._lualine') end
     }
 
     -- writing
-    use { 'vim-pandoc/vim-pandoc-syntax' }
-    use { 'vim-pandoc/vim-pandoc' }
-    use { 'vim-pandoc/vim-criticmarkup' }
+    use {'vim-pandoc/vim-pandoc-syntax'}
+    use {'vim-pandoc/vim-pandoc'}
+    use {'vim-pandoc/vim-criticmarkup'}
     use {
         "quarto-dev/quarto-vim",
-        requires = { { "vim-pandoc/vim-pandoc-syntax" } },
-        ft = { "quarto" }
+        requires = {{"vim-pandoc/vim-pandoc-syntax"}},
+        ft = {"quarto"}
     }
     use 'micarmst/vim-spellsync' -- personal dict improvements for git sync
-    use { 'folke/zen-mode.nvim', config = require('zen-mode').setup() } -- provide distraction free writing
+    use {'folke/zen-mode.nvim', config = require('zen-mode').setup()} -- provide distraction free writing
     use 'folke/twilight.nvim' -- provide even distraction free-er writing (lowlight paragraphs)
     use 'alok/notational-fzf-vim' -- quickly search through the wiki
 
     -- languages
-    use { 'euclidianAce/BetterLua.vim', ft = 'lua' } -- better syntax highlighting for lua
+    use {'euclidianAce/BetterLua.vim', ft = 'lua'} -- better syntax highlighting for lua
     use 'aliou/bats.vim' -- enable syntax for bats shell-code testing library
 
     -- REPL work
@@ -134,7 +138,7 @@ require("packer").startup(function()
         'hanschen/vim-ipython-cell', -- send code 'cells' to REPL
         ft = "python",
         config = function()
-            vim.g.ipython_cell_highlight_cells_ft = { 'python' }
+            vim.g.ipython_cell_highlight_cells_ft = {'python'}
             vim.g.ipython_cell_insert_tag = "## Cell"
         end
     }
@@ -169,19 +173,19 @@ require("packer").startup(function()
     use {
         "nvim-telescope/telescope.nvim",
         requires = {
-            { "nvim-lua/popup.nvim" }, { "nvim-lua/plenary.nvim" },
-            { "nvim-telescope/telescope-fzf-native.nvim", run = 'make' }
+            {"nvim-lua/popup.nvim"}, {"nvim-lua/plenary.nvim"},
+            {"nvim-telescope/telescope-fzf-native.nvim", run = 'make'}
         },
         config = function() require('plug._telescope') end
     }
     use {
         'protex/better-digraphs.nvim',
-        requires = { { "nvim-telescope/telescope.nvim" } }
+        requires = {{"nvim-telescope/telescope.nvim"}}
     }
 
     -- snippeting
-    use { "hrsh7th/vim-vsnip", event = "InsertEnter" } -- snippet engine
-    use { "rafamadriz/friendly-snippets", event = "InsertEnter" } -- many snippets
+    use {"hrsh7th/vim-vsnip", event = "InsertEnter"} -- snippet engine
+    use {"rafamadriz/friendly-snippets", event = "InsertEnter"} -- many snippets
 
     -- treesitter
     use {
@@ -194,7 +198,7 @@ require("packer").startup(function()
     use {
         'RRethy/nvim-treesitter-textsubjects', -- allows using . and ; to target treesitter branches
         config = function()
-            require 'nvim-treesitter.configs'.setup {
+            require'nvim-treesitter.configs'.setup {
                 textsubjects = {
                     enable = true,
                     keymaps = {
@@ -221,7 +225,7 @@ require("packer").startup(function()
     use 'ray-x/lsp_signature.nvim'
     use {
         'ray-x/navigator.lua',
-        requires = { 'ray-x/guihua.lua', run = 'cd lua/fzy && make' },
+        requires = {'ray-x/guihua.lua', run = 'cd lua/fzy && make'},
         config = function() require('plug._lsp') end
     }
     -- and completion
@@ -233,14 +237,15 @@ require("packer").startup(function()
             'hrsh7th/cmp-cmdline', 'hrsh7th/cmp-vsnip', 'hrsh7th/cmp-nvim-lua',
             'kdheepak/cmp-latex-symbols', 'ray-x/cmp-treesitter',
             'f3fora/cmp-spell', 'cbarrete/completion-vcard'
-
         }
     }
+    use {
+        'aspeddro/cmp-pandoc.nvim',
+        requires = {'nvim-lua/plenary.nvim', 'jbyuki/nabla.nvim'}
+    }
     require('plug._cmp')
 
     -- Automatically set up your configuration after cloning packer.nvim
     -- Put this at the end after all plugins
-    if packer_bootstrap then
-        require('packer').sync()
-    end
+    if packer_bootstrap then require('packer').sync() end
 end)

office/.config/khard/khard.conf

@@ -0,0 +1,49 @@
+[addressbooks]
+[[contacts]]
+path = ~/documents/contacts/myconts
+
+[general]
+debug = no
+default_action = list
+# These are either strings or comma seperated lists
+editor = nvim
+merge_editor = nvim, -d
+
+[contact table]
+# display names by first or last name: first_name / last_name / formatted_name
+display = first_name
+# group by address book: yes / no
+group_by_addressbook = no
+# reverse table ordering: yes / no
+reverse = no
+# append nicknames to name column: yes / no
+show_nicknames = no
+# show uid table column: yes / no
+show_uids = yes
+# show kind table column: yes / no
+show_kinds = no
+# sort by first or last name: first_name / last_name / formatted_name
+sort = first_name
+# localize dates: yes / no
+localize_dates = yes
+# set a comma separated list of preferred phone number types in descending priority
+# or nothing for non-filtered alphabetical order
+preferred_phone_number_type = pref, cell, home
+# set a comma separated list of preferred email address types in descending priority
+# or nothing for non-filtered alphabetical order
+preferred_email_address_type = pref, work, home
+
+[vcard]
+# extend contacts with your own private objects
+# these objects are stored with a leading "X-" before the object name in the vcard files
+# every object label may only contain letters, digits and the - character
+# example:
+#   private_objects = Jabber, Skype, Twitter
+# default: ,  (the empty list)
+private_objects = Jabber, Skype, Twitter
+# preferred vcard version: 3.0 / 4.0
+preferred_version = 3.0
+# Look into source vcf files to speed up search queries: yes / no
+search_in_source_files = no
+# skip unparsable vcard files: yes / no
+skip_unparsable = no

qutebrowser/.config/qutebrowser/config.py

@@ -45,7 +45,8 @@ c.downloads.location.prompt = False
 config.source("alias.py")
 config.source("maps.py")
 config.source("content.py")
-config.source("url.py")
+config.source("searchengines.py")
+config.source("redirects.py")
 
 # Tab-Bar
 # have tab bar on the right, not on the top

qutebrowser/.config/qutebrowser/redirects.py

@@ -0,0 +1,209 @@
+import random
+import re
+from qutebrowser.api import interceptor
+
+redirects = {
+    "youtube": {
+        "source": ["youtube.com"],
+        "target": [
+            "yt.oelrichsgarcia.de",
+            "vid.priv.au",
+            "invidious.weblibre.org",
+            "invidious.dhusch.de",
+            "iv.ggtyler.dev",
+            "invidious.baczek.me",
+            "yt.funami.tech",
+            "iv.melmac.space",
+            "invidious.silur.me",
+            "inv.riverside.rocks",
+            "invidious.lidarshield.cloud",
+            "invidious.flokinet.to",
+            "invidious.snopyta.org",
+            "invidious.kavin.rocks",
+            "vid.puffyan.us",
+            "yt.artemislena.eu",
+            "invidious.nerdvpn.de",
+            "invidious.tiekoetter.com",
+            "invidious.namazso.eu",
+            "inv.vern.cc",
+            "yewtu.be",
+            "inv.bp.projectsegfau.lt",
+            "invidious.epicsite.xyz",
+            "y.com.sb",
+            "invidious.sethforprivacy.com",
+        ],
+    },
+    "lbry": {
+        "source": ["odysee.com"],
+        "target": [
+            "lbry.bcow.xyz",
+            "odysee.076.ne.jp",
+            "librarian.pussthecat.org",
+            "lbry.mutahar.rocks",
+            "librarian.esmailelbob.xyz",
+            "lbry.vern.cc",
+        ],
+    },
+    "reddit": {
+        "source": ["reddit.com"],
+        "target": [
+            "td.vern.cc",
+            "teddit.adminforge.de",
+            "teddit.artemislena.eu",
+            "teddit.bus-hit.me",
+            "teddit.froth.zone",
+            "teddit.hostux.net",
+            "teddit.namazso.eu",
+            "teddit.net",
+            "teddit.pussthecat.org",
+            "teddit.sethforprivacy.com",
+            "teddit.totaldarkness.net",
+            "teddit.zaggy.nl",
+        ],
+    },
+    "twitter": {
+        "source": ["twitter.com"],
+        "target": [
+            "nitter.net",
+            "nitter.42l.fr",
+            "nitter.pussthecat.org",
+            "nitter.fdn.fr",
+            "nitter.1d4.us",
+            "nitter.kavin.rocks",
+            "nitter.unixfox.eu",
+            "nitter.namazso.eu",
+            "nitter.moomoo.me",
+            "bird.trom.tf",
+            "nitter.it",
+            "twitter.censors.us",
+            "nitter.grimneko.de",
+            "twitter.076.ne.jp",
+            "n.l5.ca",
+            "unofficialbird.com",
+            "nitter.ungovernable.men",
+        ],
+    },
+    "imdb": {
+        "source": ["imdb.com"],
+        "target": [
+            "libremdb.iket.me",
+            "libremdb.pussthecat.org",
+            "libremdb.esmailelbob.xyz",
+            "ld.vern.cc",
+            "binge.whatever.social",
+            "libremdb.lunar.icu",
+        ],
+    },
+    "translate": {
+        "source": ["translate.google.com"],
+        "target": [
+            "lingva.ml",
+            "translate.igna.wtf",
+            "translate.plausibility.cloud",
+            "translate.projectsegfau.lt",
+            "translate.dr460nf1r3.org",
+            "lingva.garudalinux.org",
+            "translate.jae.fi",
+        ],
+    },
+    "tiktok": {
+        "source": ["tiktok.com"],
+        "target": [
+            "proxitok.pabloferreiro.es",
+            "proxitok.pussthecat.org",
+            "tok.habedieeh.re",
+            "proxitok.esmailelbob.xyz",
+            "proxitok.privacydev.net",
+            "proxitok.odyssey346.dev",
+            "tok.artemislena.eu",
+            "tok.adminforge.de",
+            "proxitok.manasiwibi.com",
+            "tik.hostux.net",
+            "tt.vern.cc",
+            "proxitok.mha.fi",
+            "proxitok.pufe.org",
+            "proxitok.marcopisco.com",
+            "cringe.whatever.social",
+            "proxitok.lunar.icu",
+        ],
+    },
+    "imgur": {
+        "source": ["imgur.com"],
+        "target": [
+            "rimgo.bcow.xyz",
+            "rimgo.pussthecat.org",
+            "rimgo.totaldarkness.net",
+            "rimgo.bus-hit.me",
+            "rimgo.esmailelbob.xyz",
+            "imgur.artemislena.eu",
+            "rimgo.vern.cc",
+            "rim.odyssey346.dev",
+            "rimgo.privacytools.io",
+            "i.habedieeh.re",
+            "rimgo.hostux.net",
+            "ri.zzls.xyz",
+            "rimgo.marcopisco.com",
+            "rimgo.lunar.icu",
+        ],
+    },
+    "medium": {
+        "source": ["medium.com"],
+        "target": [
+            "scribe.rip",
+            "scribe.nixnet.services",
+            "scribe.citizen4.eu",
+            "scribe.bus-hit.me",
+            "scribe.froth.zone",
+            "scribe.esmailelbob.xyz",
+            "scribe.privacydev.net",
+            "sc.vern.cc",
+        ],
+    },
+    "google": {
+        "source": ["google.com"],
+        "target": [
+            "whoogle.dcs0.hu",
+        ],
+    },
+    "wikipedia": {
+        "source": ["wikipedia.org"],
+        "target": [
+            "wiki.adminforge.de",
+            "wiki.froth.zone",
+            "wiki.slipfox.xyz",
+            "wikiless.esmailelbob.xyz",
+            "wikiless.funami.tech",
+            "wikiless.northboot.xyz",
+            "wikiless.org",
+            "wikiless.tiekoetter.com",
+            "wl.vern.cc",
+        ],
+    },
+}
+
+def rewrite(request: interceptor.Request):
+    if (
+        request.resource_type != interceptor.ResourceType.main_frame
+        or request.request_url.scheme() in {"data", "blob"}
+    ):
+        return
+
+    url = request.request_url
+
+    for service in redirects.values():
+        matched=False
+        for source in service["source"]:
+            if re.search(source, url.host()):
+                matched=True
+
+        if matched:
+            target = service["target"][random.randint(0, len(service["target"]))]
+            if target is not None and url.setHost(target) is not False:
+                try:
+                    request.redirect(url)
+                except:
+                    pass
+                break
+
+
+interceptor.register(rewrite)

qutebrowser/.config/qutebrowser/searchengines.py

@@ -1,5 +1,3 @@
-from qutebrowser.api import interceptor
-
 c.url.searchengines = {
     "sci": "https://sci-hub.ru/{}",
     "DEFAULT": "https://search.martyoeh.me/?q={}",
@@ -24,41 +22,7 @@ c.url.searchengines = {
     "r": "https://www.reddit.com/r/{}",
     "t": "https://www.thesaurus.com/browse/{}",
     "w": "https://en.wikipedia.org/w/index.php?search={}",
-    "yt": "https://www.youtube.com/results?search_query={}",
+    "yt": "https://invidious.weblibre.org/search?q={}",
 }
 c.url.default_page = "https://start.duckduckgo.com"
 c.url.start_pages = ["https://start.duckduckgo.com"]
-
-redirects = {
-    "reddit.com": "teddit.net",
-    "www.reddit.com": "teddit.net",
-    "youtube.com": "yewtu.be",
-    "www.youtube.com": "www.yewtu.be",
-    "twitter.com": "nitter.net",
-    "www.twitter.com": "nitter.net",
-    "instagram.com": "bibliogram.art",
-    "www.instagram.com": "bibliogram.art",
-    "wikipedia.org": "wikiless.org",
-    "en.wikipedia.org": "wikiless.org",
-    "medium.com": "scribe.rip",
-}
-
-
-def rewrite(request: interceptor.Request):
-    if (
-        request.resource_type != interceptor.ResourceType.main_frame
-        or request.request_url.scheme() in {"data", "blob"}
-    ):
-        return
-
-    url = request.request_url
-
-    redir = redirects.get(url.host())
-    if redir is not None and url.setHost(redir) is not False:
-        try:
-            request.redirect(url)
-        except:
-            pass
-
-
-interceptor.register(rewrite)

sh/.config/sh/alias

@@ -124,3 +124,7 @@ fi
 if exist distrobox; then
     alias db=distrobox
 fi
+
+if exist sc-im; then
+    alias sc=sc-im
+fi