wayland: Fix automatic system suspend

Previously, swayidle would wait for each command to be finished before
executing the next which, with lockscreen running in the foreground,
would not happen until it was unlocked again. The results were a working
lockscreen after the timeout, but nothing else happening and suspend
mode only being engaged *as soon as* the lockscreen was disabled (i.e.
when you want to use the PC again).

This removes swayidle's waiting for commands to finish and instead
simply go on to the next timeout when the time is right and should thus
fix the issue.

.gitignore

@@ -39,5 +39,5 @@ vifminfo.json
 colorscheme.yml
 
 # taskwarrior
-taskwarrior/.config/task/task-sync.rc
-taskwarrior/.config/task/contexts
+office/.config/task/task-sync.rc
+office/.config/task/contexts

README.md

@@ -56,6 +56,7 @@ Enjoy!
 * [`pass`](pass/README.md) - Password management suite
 * [`bibtex`](bibtex/README.md) - LateX/BibteX/pandoc plaintext writing & reference suite
 * [`git`](git/README.md) - distributed version control system.
+* [`office`](office/README.md) - office/productivity software for writing e-mail and setting appointments
 
 ## Notes
 

bootstrap/packages.tsv

@@ -37,7 +37,9 @@ caddy	Fast web server with automatic HTTPS	R
 calcurse	A text-based personal organizer	R	
 catdoc	A convertor for Microsoft Word, Excel, PowerPoint and RTF Files to text	R	
 chafa	Image-to-text converter supporting a wide range of symbols and palettes, transparency, animations, etc.	R	
+cinny-desktop-bin	Matrix client focusing primarily on a simple, elegant and secure interface (binary release)	A	
 clipman	A simple clipboard manager for Wayland	A	
+cups-pdf	PDF printer for cups	R	
 cups-pk-helper	A helper that makes system-config-printer use PolicyKit	R	
 dbus-broker	Linux D-Bus Message Broker	R	
 dcnnt	Yet another tool to connect Android phone with desktop similar to KDE Connect	A	
@@ -46,7 +48,7 @@ dell-command-configure	Configure various BIOS features on Dell laptops	A
 devour	Window Manager agnostic swallowing feature for terminal emulators	A	
 dhcpcd	RFC2131 compliant DHCP client daemon	R	
 diff-so-fancy	Good-looking diffs with diff-highlight and more	R	
-docker	Pack, ship and run any application as a lightweight container	R	
+distrobox	Use any linux distribution inside your terminal.	A	
 docker-compose	Fast, isolated development environments using Docker	R	
 docx2txt	Recovers text from DOCX files, with good formatting.	R	
 dos2unix	Text file format converter	R	
@@ -54,7 +56,6 @@ duf	Disk Usage/Free Utility	R
 dunst	Customizable and lightweight notification-daemon	R	
 dust	A more intuitive version of du in rust	R	
 efm-langserver	General purpose Language Server	A	
-element-desktop	Glossy Matrix collaboration client — desktop version.	R	
 enca	Charset analyser and converter	R	
 entr	Run arbitrary commands when files change	R	
 evince	Document viewer (PDF, PostScript, XPS, djvu, dvi, tiff, cbr, cbz, cb7, cbt)	R	
@@ -70,7 +71,7 @@ fonts-cjk	Linux 下的免费商用字体包	A
 freerdp	Free implementation of the Remote Desktop Protocol (RDP)	R	
 fvextra	Extensions to fancyvrb, including automatic line breaking and improved math mode	R	
 fwupd	Simple daemon to allow session software to update firmware	R	
-fzf-tab-git	Replace zsh's default completion selection menu with fzf.	R	
+fzf-tab-bin-git	Replace zsh's default completion selection menu with fzf (git version). This package also compiles the optional binary module.	A	
 gallery-dl	Command-line program to download image-galleries and collections from several image hosting sites	A	
 gamemode	A daemon/lib combo that allows games to request a set of optimisations be temporarily applied to the host OS	R	
 gimp	GNU Image Manipulation Program	R	
@@ -80,12 +81,10 @@ gitui	Blazing fast terminal-ui for git written in Rust	R
 gk6x-bin	Configure keys, macros, and lighting on GK6X keyboards (GK64, GK84, GK61, etc)	A	
 glances	CLI curses-based monitoring tool	R	
 glfw-wayland	A free, open source, portable framework for graphical application development (wayland)	R	
-glow	Markdown renderer for the CLI	R	
-gnome-keyring	Stores passwords and encryption keys	R	
+glow	Command-line markdown renderer	R	
 gnu-netcat	GNU rewrite of netcat, the network piping application	R	
 gnumeric	A GNOME Spreadsheet Program	R	
 gnuplot	Plotting package which outputs to X11, PostScript, PNG, GIF, and others	R	
-go	Core compiler tools for the Go programming language	R	
 go-md2man	A markdown to manpage generator	R	
 gomuks	A terminal based Matrix client written in Go	A	
 gopls	Language server for Go programming language	R	
@@ -93,7 +92,6 @@ gotty-bin	Simple command line tool that turns your CLI tools into web applicatio
 grim	Screenshot utility for Wayland	R	
 grub	GNU GRand Unified Bootloader (2)	R	
 gsimplecal	Simple and lightweight GTK calendar	R	
-gst-libav	Multimedia graph framework - libav plugin	R	
 gst-plugins-bad	Multimedia graph framework - bad plugins	R	
 gstreamer-vaapi	Multimedia graph framework - vaapi plugin	R	
 gucharmap	Gnome Unicode Charmap	R	
@@ -107,14 +105,17 @@ intel-ucode	Microcode update files for Intel CPUs	R
 iputils	Network monitoring tools, including ping	R	
 ipython	An enhanced Interactive Python shell.	R	
 iucode-tool	Tool to manipulate Intel® IA-32/X86-64 microcode bundles	R	
+iwd	Internet Wireless Daemon	R	
 jabref-latest	GUI frontend for BibTeX, written in Java; latest main (master) version from git	A	
 jiq-bin	Interactive JSON query tool using jq expressions	A	
 jmtpfs	FUSE and libmtp based filesystem for accessing MTP (Media Transfer Protocol) devices	A	
 jpdftweak	A Swiss Army Knife GUI application for PDF documents	A	
 jrnl	Collect your thoughts and notes without leaving the command line	R	
+jupyter-nbclient	A tool for running Jupyter Notebooks in different execution contexts.	R	
+kanshi	Dynamic output configuration for Wayland WMs	R	
 keyd	A key remapping daemon for linux.	A	
 khal	CLI calendar application build around CalDAV	R	
-khard	Console CardDAV client	R	
+khard	Console address book manager	R	
 kitty	A modern, hackable, featureful, OpenGL-based terminal emulator	R	
 kubo	IPFS implementation in Go	R	
 lazygit	Simple terminal UI for git commands	R	
@@ -123,6 +124,8 @@ libqalculate	Multi-purpose desktop calculator	R
 libreoffice-fresh	LibreOffice branch which contains new features and program enhancements	R	
 libva-intel-driver	VA-API implementation for Intel G45 and HD Graphics family	R	
 licenses	A set of common license files	R	
+libvirt	API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)	R	
+linux	The Linux kernel and modules	R	
 linux-firmware	Firmware files for Linux	R	
 linux-headers	Headers and scripts for building modules for the Linux kernel	R	
 linux-lts	The LTS Linux kernel and modules	R	
@@ -145,6 +148,7 @@ masterpdfeditor-free	A complete solution for creation and editing PDF files - Fr
 mbsync-git	free (GPL) mailbox synchronization program	A	
 mediainfo	Supplies technical and tag information about a video or audio file (CLI interface)	R	
 mermaid-cli	Generation of diagram and flowchart from text in a similar manner as markdown (CLI)	A	
+micro	Modern and intuitive terminal-based text editor	R	
 mimeo	Open files by MIME-type or file name using regular expressions.	A	
 minidlna	A DLNA/UPnP-AV Media server (aka ReadyDLNA)	R	
 minio-client	Replacement for ls, cp, mkdir, diff and rsync commands for filesystems and object storage	R	
@@ -176,14 +180,14 @@ nmap	Utility for network discovery and security auditing	R
 nodejs-markdownlint-cli	MarkdownLint Command Line Interface	A	
 nodejs-pandiff	Prose diffs for any document format supported by Pandoc	A	
 npm	A package manager for javascript	R	
+nss-mdns	glibc plugin providing host name resolution via mDNS	R	
 nsxiv	Neo (or New or Not) Simple (or Small or Suckless) X Image Viewer	A	
 ntfs-3g	NTFS filesystem driver and utilities	R	
 ntp	Network Time Protocol reference implementation	R	
 nushell	A new type of shell	R	
-nvm	Node Version Manager - Simple bash script to manage multiple active node.js versions	R	
 nzbget	Download from Usenet using .nzb files	R	
 offpunk-git	Fork of the command-line Gemini client AV-98 with added offline capabilities	A	
-oh-my-zsh-git	A community-driven framework for managing your zsh configuration. Includes 180+ optional plugins and over 120 themes to spice up your morning, and an auto-update tool so that makes it easy to keep up with the latest updates from the community	R	
+oh-my-zsh-git	A community-driven framework for managing your zsh configuration. Includes 180+ optional plugins and over 120 themes to spice up your morning, and an auto-update tool so that makes it easy to keep up with the latest updates from the community	A	
 os-prober	Utility to detect other OSes on a set of drives	R	
 otf-nerd-fonts-fira-code	Monospaced font with programming ligatures. Patched with Nerd Fonts icons.	A	
 parallel	A shell tool for executing jobs in parallel	R	
@@ -191,16 +195,20 @@ paru-bin	Feature packed AUR helper	A
 pass-coffin	A password store extension that hides data inside a signed and encrypted coffin	A	
 pass-ssh	A pass extension that creates ssh keys with an automatically generated passphrases stored in pass and outputs the public key using fzf or rofi	A	
 pavucontrol	PulseAudio Volume Control	R	
+pbzip2	Parallel implementation of the bzip2 block-sorting file compressor	R	
 pdfjs	PDF reader in javascript	R	
 pdftk	Command-line tool for working with PDFs	R	
 peek	Simple screen recorder with an easy to use interface	R	
 perf	Linux kernel performance auditing tool	R	
 perl-authen-sasl	Perl/CPAN Module Authen::SASL : SASL authentication framework	R	
+pigz	Parallel implementation of the gzip file compressor	R	
 pipewire-alsa	Low-latency audio/video router and processor - ALSA configuration	R	
 playerctl	mpris media player controller and lib for spotify, vlc, audacious, bmp, xmms2, and others.	R	
+podman	Tool and library for running OCI-based containers in pods	R	
 powertop	A tool to diagnose issues with power consumption and power management	R	
 prettier	An opinionated code formatter for JS, JSON, CSS, YAML and much more	R	
 protonvpn	Official ProtonVPN metapackage that installs protonvpn-gui and protonvpn-cli, maintained by the ProtonVPN team.	A	
+ptpython	Python REPL build on top of prompt_toolkit	A	
 pulsemixer	CLI and curses mixer for pulseaudio	R	
 pv	A terminal-based tool for monitoring the progress of data through a pipeline.	R	
 pyright	Type checker for the Python language	R	
@@ -223,6 +231,8 @@ python-pyqt6-datavisualization	Python bindings for QtDataVisualization	R
 python-pyqt6-networkauth	Python bindings for QtNetworkAuth	R	
 python-readability-lxml	Fast html to text parser (article readability tool) python library	R	
 python-slugify	A Python slugify application that handles unicode	R	
+python-tasklib	Python library for interacting with taskwarrior databases	R	
+qemu-base	A basic QEMU setup for headless environments	R	
 qt5-wayland	Provides APIs for Wayland	R	
 qt5-xmlpatterns	Support for XPath, XQuery, XSLT and XML schema validation	R	
 qt6-svg	Classes for displaying the contents of SVG files	R	
@@ -232,6 +242,7 @@ quarto-cli-bin	An open-source scientific and technical publishing system built o
 qutebrowser	A keyboard-driven, vim-like browser based on PyQt5	R	
 redshift	Adjusts the color temperature of your screen according to your surroundings.	R	
 refind	An EFI boot manager	R	
+refind-btrfs	Generate rEFInd manual boot stanzas from Btrfs snapshots	A	
 reflector	A Python 3 module and script to retrieve and filter the latest Pacman mirror list.	R	
 remind	A sophisticated calendar and alarm program.	R	
 remmina	remote desktop client written in GTK+	R	
@@ -248,12 +259,14 @@ shellcheck-bin	Shell script analysis tool (binary release, static)	A
 shfmt	Format shell programs	R	
 slurp	Select a region in a Wayland compositor	R	
 smartmontools	Control and monitor S.M.A.R.T. enabled ATA and SCSI Hard Drives	R	
+snap-pac	Pacman hooks that use snapper to create pre/post btrfs snapshots like openSUSE's YaST	R	
 speedtest-cli	Command line interface for testing internet bandwidth using speedtest.net	R	
 sshfs	FUSE client based on the SSH File Transfer Protocol	R	
 stow	Manage installation of multiple softwares in the same directory tree	R	
 surfraw	Shell Users' Revolutionary Front Rage Against the Web	R	
 swaybg	Wallpaper tool for Wayland compositors	R	
-systemd-sysvcompat	sysvinit compat for systemd	R	
+swayidle	Idle management daemon for Wayland	R	
+swww	Efficient animated wallpaper daemon for wayland, controlled at runtime.	A	
 task-spooler	Queue up tasks from the shell for batch execution	A	
 taskopen	Script for taking notes and open urls with taskwarrior	A	
 tasksh	A shell command that wraps Taskwarrior commands	A	
@@ -261,14 +274,12 @@ tea	A command line tool to interact with Gitea servers	R
 tex-gyre-fonts	Substitute PostScript fonts in OpenType format	R	
 texlab	A cross-platform implementation of the Language Server Protocol for LaTeX.	R	
 thermald	The Linux Thermal Daemon program from 01.org	R	
-tigervnc	Suite of VNC servers and clients. Based on the VNC 4 branch of TightVNC.	R	
 timew	Timewarrior, A command line time tracking application	R	
 timg	Terminal Image and Video Viewer	A	
 tlp	Linux Advanced Power Management	R	
 tmux	A terminal multiplexer	R	
 toilet	free replacement for the FIGlet utility.	A	
-tomb	Crypto Undertaker, a simple tool to manage encrypted storage	R	
-topgrade	Invoke the upgrade procedure of multiple package managers	R	
+topgrade-bin	Invoke the upgrade procedure of multiple package managers	A	
 traceroute	Tracks the route taken by packets over an IP network	R	
 translate-shell	A command-line interface and interactive shell for Google Translate	R	
 transmission-qt	Fast, easy, and free BitTorrent client (Qt GUI)	R	
@@ -297,7 +308,6 @@ vim-language-server	VimScript language server	A
 virtualbox	Powerful x86 virtualization for enterprise as well as home use	R	
 virtualbox-guest-iso	The official VirtualBox Guest Additions ISO image	R	
 visidata	Terminal spreadsheet multitool for discovering and arranging data	R	
-vulkan-intel	Intel's Vulkan mesa driver	R	
 wavemon	Ncurses-based monitoring application for wireless network devices	R	
 waybar	Highly customizable Wayland bar for Sway and Wlroots based compositors	R	
 waylock	A simple screenlocker for wayland compositors	R	
@@ -307,6 +317,7 @@ wezterm	A GPU-accelerated cross-platform terminal emulator and multiplexer	R
 wget	Network utility to retrieve files from the Web	R	
 wireguard-tools	next generation secure network tunnel - tools for configuration	R	
 wireless_tools	Tools allowing to manipulate the Wireless Extensions	R	
+wlopm	Wayland output power management.	A	
 wpa_actiond	Daemon that connects to wpa_supplicant and handles connect and disconnect events	A	
 wtype	xdotool type for wayland	R	
 xdg-user-dirs	Manage user directories like ~/Desktop and ~/Music	R	
@@ -314,7 +325,7 @@ xsv	A CLI for indexing, slicing, analyzing, splitting and joining CSV files	R
 yaml-language-server	YAML Language Server	R	
 yarn	Fast, reliable, and secure dependency management	R	
 youtube-dl	A command-line program to download videos from YouTube.com and a few more sites	R	
-yt-dlp-git	A youtube-dl fork with additional features and fixes (git)	A	
+yt-dlp	A youtube-dl fork with additional features and fixes	R	
 ytfzf	A POSIX script to find and watch youtube videos from the terminal	R	
 zathura-cb	Adds comic book support to zathura	R	
 zathura-djvu	DjVu support for Zathura	R	
@@ -322,5 +333,5 @@ zathura-pdf-mupdf	PDF support for Zathura (MuPDF backend) (Supports PDF, ePub, a
 zotero-bin	Zotero Standalone. Is a free, easy-to-use tool to help you collect, organize, cite, and share your research sources.	A	
 zq	Tooling for super-structured data	A	
 zsh-autosuggestions	Fish-like autosuggestions for zsh	R	
-zsh-fast-syntax-highlighting-git	Optimized and extended zsh-syntax-highlighting	R	
+zsh-fast-syntax-highlighting	Optimized and extended zsh-syntax-highlighting	A	
 zsh-pure-prompt	Pretty, minimal and fast ZSH prompt	A	

mail/.config/sh/env.d/neomutt-create-cache-dir.sh

@@ -1,4 +0,0 @@
-#!/usr/bin/env sh
-# Ensure the neomutt cache directories exist
-
-[ -d "${XDG_CACHE_HOME:-~/.cache}/neomutt" ] || mkdir -p "${XDG_CACHE_HOME:-~/.cache}/neomutt/hcache"

mail/README.md

@@ -1,15 +0,0 @@
-# e-mail module
-
-[aerc](https://aerc-mail.org/) - terminal mail client
-[isync](https://isync.sourceforge.io/mbsync.html) - mirror your Imapped mail directory locally with two way synchronization
-[notmuch](https://notmuchmail.org/) - index and search your mail
-
-The current mail setup uses `mbsync` (from the isync project) to locally mirror the GMail imap folder.
-It, as of now, needs to be manually run by invoking `mbsync gmail` -- which expects your username and password to reside in a [`pass`](/pass) accessible file called `misc/aerc-gmail-app-password`.
-In other words --- this is very specific to my setup and if transferring the options, please customize to your needs.
-
-Then, `notmuch` can be run on the local maildir to generate and indexed full-text search engine.
-Right now, `notmuch` can only be used through its cli, it is not yet connected to `aerc`.
-
-`aerc` picks up the maildir created by `mbsync` in `~/documents/mail` and works on it.
-`mbsync` syncs any changes made back to the remote imap directory.

nvim/.config/nvim/lua/plugins.lua

@@ -27,10 +27,9 @@ require("packer").startup(function()
     -- vim plugs
     -- essential
     use {
-        'marty-oehme/Navigator.nvim',
-        branch = 'feat/add-wezterm-navigation',
+        'numToStr/Navigator.nvim',
         config = function() require('Navigator').setup() end
-    } -- allow seamless navigation between vim buffers and tmux splits
+    } -- allow seamless navigation between vim buffers and tmux/wezterm splits
     use 'jeffkreeftmeijer/vim-numbertoggle' -- toggles numbers to absolute for all buffers but the current which is relative
     use 'RRethy/vim-illuminate' -- highlight other occurences of the word under cursor
     use 'ojroques/vim-oscyank' -- yank from *anywhere* (even ssh session) to clipboard, using :OSCYank

office/.config/isync/mbsyncrc

@@ -9,7 +9,7 @@ PassCmd "pass show misc/gmail-app-password | head -n1"
 # PassCmd "gpg2 -q --for-your-eyes-only --no-tty -d ~/.mailpass.gpg"
 #
 # Use SSL
-SSLType IMAPS
+TLSType IMAPS
 CertificateFile /etc/ssl/certs/ca-certificates.crt
 # Throttle simultaneous access to make google happy
 PipelineDepth 60

office/.config/khal/config

@@ -0,0 +1,16 @@
+[calendars]
+
+[[calendar_local]]
+path = ~/documents/calendars/*
+type = discover
+color = auto
+
+[locale]
+timeformat = %H:%M
+dateformat = %Y-%m-%d
+longdateformat = %Y-%m-%d
+datetimeformat = %Y-%m-%d %H:%M
+longdatetimeformat = %Y-%m-%d %H:%M
+
+[default]
+default_calendar = Activities

office/.config/neomutt/maps

@@ -5,11 +5,31 @@ bind index,pager g       noop # don't send group-replies with g
 bind index       gg      first-entry
 bind index       G       last-entry
 bind index       <space> collapse-thread
-bind index,pager \CF     next-page
-bind index,pager \CB     previous-page
-bind index,pager N       search-opposite # vim-like search
+
+# view manipulation
+bind  attach,browser,index,pager \CF next-page
+bind  attach,browser,index,pager \CB previous-page
+bind  attach,browser,index,pager \Cu half-up
+bind  attach,browser,index,pager \Cd half-down
+bind  browser,index,pager        \Ce next-line
+bind  browser,index,pager        \Cy previous-line
+
 bind  index                      s   toggle-new
+bind  index                      S   set-flag
 macro index                      \CS "T~U<enter><tag-prefix><clear-flag>N<untag-pattern>.<enter>" "mark all messages as read"
+bind  index,pager                w   display-toggle-weed
+
+# Thread manipulation
+bind pager d noop
+bind index,pager    dd delete-message
+bind index,pager    dT delete-thread
+bind index,pager    dt delete-subthread
+bind pager,index    gt next-thread
+bind pager,index    gT previous-thread
+bind pager,index    za collapse-thread
+bind pager,index    zA collapse-all
+bind pager,index    zr reconstruct-thread
+bind pager,index    zR entire-thread
 
 # Email completion bindings
 bind editor <Tab> complete-query
@@ -33,7 +53,7 @@ bind index,pager <up>     sidebar-prev
 bind index,pager <right>  sidebar-open
 # search navigation
 macro index a "<limit>all\n" "show all messages (undo limit)"
-# notmuch search navigation
+bind browser,index,pager N search-opposite # vim-like search
 bind index \\ vfolder-from-query # notmuch search
 # pager navigation
 bind pager,attach h exit
@@ -48,14 +68,20 @@ bind compose p postpone-message
 macro compose M "F pandoc -s -f markdown -t html \ny^T^Utext/html; charset=UTF-8\n" "Convert from MD to HTML"
 
 # since we unbound the original g
-bind  index,pager R   group-reply
+bind  index,pager r   noop              # to avoid accidentally sending replies
+bind  index,pager rr  group-reply
+bind  index,pager ro  reply
 # open urls found in the e-mail
 macro index,pager \CU "|urlview<enter>" "call urlview to open links"
 
 # Refresh far imap email
-macro index O "<sync-mailbox><shell-escape>export MBSYNC_PRE=true; mail-check<enter><sync-mailbox>" "refresh all e-mail"
-macro index o "<sync-mailbox><shell-escape>export MBSYNC_PRE=true; mail-check gmail-inbox<enter><sync-mailbox>" "refresh inbox e-mail"
+macro index O "<sync-mailbox><shell-escape>export MBSYNC_PRE=true; sync-mail<enter><sync-mailbox>" "refresh all e-mail"
+macro index o "<sync-mailbox><shell-escape>export MBSYNC_PRE=true; sync-mail gmail-inbox<enter><sync-mailbox>" "refresh inbox e-mail"
 
 # Saner copy/move dialogs
 macro index C "<copy-message>?<toggle-mailboxes>" "copy a message to a mailbox"
 macro index M "<save-message>?<toggle-mailboxes>" "move a message to a mailbox"
+
+# Send mail to taskwarrior
+macro index,pager T "<pipe-message>mutt2task -c -d -t<enter>" "add mail as task to taskwarrior with custom description and tags"
+macro index,pager t "<pipe-message>mutt2task -c<enter>" "add mail as task to taskwarrior"

office/.config/sh/alias.d/calcurse-vdir.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env sh
+#
+# Wraps around the calcurse invocation and syncs calendar data
+# to local vdir - given by default below.
+#
+# For now ONLY PROVIDES ONE-WAY Synchronization, see below.
+
+# The path in which *the calendars* reside (i.e. toplevel with access to all paths)
+CAL_PATH="$HOME/documents/calendars"
+
+calcurse() {
+    find "$CAL_PATH" -maxdepth 1 -type d -exec calcurse-vdir import {} \;
+}
+
+# Enable two-way sync. One issue is that calcurse would sync everything
+# into the top-level path (or the selected calendar path) since it makes
+# not the same differentiation as the vdir between calendars.
+# FIXME Not sure how to resolve currently.
+#
+# The below works as a simple two-way synchronization on exiting calcurse.
+# To function the invocation has to be turned from a function above to an
+# executable shell-script file instead.
+# trap 'calcurse_export' 0
+#
+# calcurse_export() {
+#     calcurse-vdir export "$CAL_PATH"
+# }

office/.config/sh/alias.d/taskwarrior.sh

@@ -1,7 +1,5 @@
 #!/usr/bin/env sh
 
-alias taskopen='taskopen --config=${XDG_CONFIG_HOME:-~/.config}/task/taskopenrc'
-
 # invoking t starts the task shell
 # passing arguments along passes them straight through to taskwarrior instead
 t() {
@@ -17,3 +15,21 @@ t() {
 # this is not very pretty and not super portable (needs ps) but
 # works for now. from here: https://unix.stackexchange.com/a/72564/414758
 if [ "$(ps -p $$ -o comm --no-headers)" = "zsh" ]; then compdef t=task; fi
+
+# Make taskopen XDG conforming. If changing here, also change in taskrc alias.
+alias taskopen='taskopen --config=${XDG_CONFIG_HOME:-~/.config}/task/taskopenrc'
+
+alias ta="task add"
+alias tal="task log"
+alias tan="task annotate"
+
+alias tn="task next +READY"
+alias tun="task next urgency \> 4"
+
+alias tra="task active"
+alias trw="task end.after:today-1wk completed"
+
+alias tad="task +ACTIVE done"
+alias tas="task +ACTIVE stop"
+
+alias to="task open"

office/.config/sh/env.d/neomutt-create-cache-dir.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env sh
+# Ensure the neomutt cache directories exist
+
+[ -d "${XDG_CACHE_HOME:-$HOME/.cache}/neomutt" ] || mkdir -p "${XDG_CACHE_HOME:-$HOME/.cache}/neomutt/hcache"

office/.config/sh/env.d/taskwarrior-ensure-files.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+# Ensure necessary taskwarrior includes exist
+
+[ -e "${XDG_CONFIG_HOME:-$HOME/.config}/task/contexts" ] || touch "${XDG_CONFIG_HOME:-$HOME/.config}/task/contexts"
+[ -e "${XDG_CONFIG_HOME:-$HOME/.config}/task/task-sync.rc" ] || touch "${XDG_CONFIG_HOME:-$HOME/.config}/task/task-sync.rc"
+[ -e "${XDG_CONFIG_HOME:-$HOME/.config}/task/colorscheme" ] || touch "${XDG_CONFIG_HOME:-$HOME/.config}/task/colorscheme"

office/.config/task/taskopenrc

@@ -0,0 +1,20 @@
+[General]
+EDITOR = nvim
+taskbin = task
+path_ext = /usr/share/taskopen/scripts
+
+[Actions]
+note_custom_ext.regex = "^Note\\.(.*)"
+note_custom_ext.command = "$EDITOR ${XDG_DATA_HOME:-~/.local/share}/task/notes/$UUID.$LAST_MATCH"
+
+notes.regex = "^Note"
+notes.command = "$EDITOR ${XDG_DATA_HOME:-~/.local/share}/task/notes/$UUID.md"
+
+links.regex = "^https?://"
+links.command = "xdg-open $FILE"
+
+mail.regex = "^<.*@.*>$"
+mail.command = "notmuch show mid:${FILE:1:-1}"
+
+[CLI]
+

office/.config/task/taskrc

@@ -23,6 +23,7 @@ weekstart=monday
 
 # Make daily burndown default alias
 alias.burndown=burndown.daily
+alias.open=exec taskopen "--config=${XDG_CONFIG_HOME:-$HOME/.config}/task/taskopenrc"
 
 # Sort the columns a little differently
 active.indicator=>

office/.config/urlview/config

@@ -0,0 +1 @@
+COMMAND xdg-open

office/.config/vdirsyncer/config

@@ -0,0 +1,39 @@
+[general]
+status_path = "~/.local/vdirsyncer/status/"
+
+[pair calendar]
+a = "calendar_local"
+b = "calendar_nextcloud"
+collections = ["from a", "from b"]
+metadata = ["displayname", "color"]
+conflict_resolution = "b wins"
+
+[storage calendar_local]
+type = "filesystem"
+path = "~/documents/calendars/"
+fileext = ".ics"
+
+[storage calendar_nextcloud]
+type = "caldav"
+url = "https://files.martyoeh.me/remote.php/dav/"
+username.fetch = ["shell", "pass personal/files.martyoeh.me/me | awk -F': ' '{print $2}'"]
+password.fetch = ["shell", "pass personal/files.martyoeh.me/me | head -n1"]
+
+[pair contacts]
+a = "contacts_local"
+b = "contacts_nextcloud"
+collections = ["from a", "from b"]
+metadata = ["displayname", "description"]
+conflict_resolution = "b wins"
+
+[storage contacts_local]
+type = "filesystem"
+path = "~/documents/contacts/"
+fileext = ".vcf"
+
+[storage contacts_nextcloud]
+type = "carddav"
+url = "https://files.martyoeh.me/remote.php/dav/"
+username.fetch = ["shell", "pass personal/files.martyoeh.me/me | awk -F': ' '{print $2}'"]
+password.fetch = ["shell", "pass personal/files.martyoeh.me/me | head -n1"]
+

office/.local/bin/mutt2task

@@ -0,0 +1,100 @@
+#!/usr/bin/env python
+"""
+Creates a new task with corresponding description and tags.
+
+Description and tags can be supplied via commandline through `-d` and `-t` options,
+or interactively by using the options without supplying a string for them. E.g.:
+
+`mutt2task`                       => task: Reply to <subject> from <sender>
+`mutt2task -d "hello" -t one two` => task: hello +one +two
+`mutt2task -d -t`                 => asks you interactively for description and tags
+"""
+
+import argparse
+import email
+import sys
+import re
+
+from tasklib import TaskWarrior, Task
+
+
+def get_args():
+    parser = argparse.ArgumentParser(
+        description="Creates a task with given message and annotates the task with message id"
+    )
+    parser.add_argument(
+        "-d",
+        "--description",
+        nargs="?",
+        const=True,
+        default=None,
+        help="Supply a description for the task. Use the option as a flag to supply description interactively.",
+    )
+    parser.add_argument(
+        "-t",
+        "--tags",
+        nargs="*",
+        help="Supply any number of tags for the task. Use the option as a flag to supply tags interactively.",
+    )
+    parser.add_argument(
+        "-c",
+        "--clean",
+        action="store_true",
+        help="Remove subject annoyances like RE FWD on a best-effort basis.",
+    )
+    return parser.parse_args()
+
+
+args = get_args()
+
+def clean_subject(subject):
+    to_remove = ["fwd", "re", "fw", "aw", "wg", "sv", "vs", "ref", "tr"]
+    for abbrev in to_remove:
+        patt = re.compile(r"^{}(?: |:)\s*".format(abbrev), re.IGNORECASE)
+        subject = patt.sub("", subject)
+    return subject
+
+
+def get_task_description(message):
+    subject = clean_subject(message["subject"]) if args.clean else message["subject"]
+    description = 'Reply to "{}" from {}'.format(
+        subject, message["from"].split(" <")[0]
+    )
+    # automatically set description if one provided
+    if args.description and isinstance(args.description, str):
+        description = args.description
+    # otherwise let user enter one if option has been passed
+    elif args.description:
+        inp = input("Enter task description or press enter for default: ")
+        description = inp if inp else description
+    return description
+
+
+def get_task_tags():
+    tags = ["mail"]
+    if args.tags and len(args.tags) > 0:
+        tags = sum([tag.split(" ") for tag in args.tags], [])
+    elif args.tags is not None and len(args.tags) == 0:
+        inp = input("Enter task tags or press enter for default: ")
+        tags = inp.split(" ") if inp else tags
+    return tags
+
+
+def main():
+    try:
+        message = email.message_from_file(sys.stdin)
+        if not message:
+            print("Something went wrong, cannot parse mail.")
+            sys.exit(1)
+        tw = TaskWarrior("~/.local/share/task", create=False)
+        sys.stdin = open("/dev/tty")  # make user able to add input again
+        task = Task(tw, description=get_task_description(message), tags=get_task_tags())
+        task.save()
+        task.add_annotation(message['message-id'])
+    except Exception as e:
+        print(e)
+        sys.exit(2)
+
+
+if __name__ == "__main__":
+    main()

office/README.md

@@ -0,0 +1,42 @@
+# office module
+
+neomutt - terminal mail client
+[mbsync](https://isync.sourceforge.io/mbsync.html) - mirror your Imapped mail directory locally with two-way synchronization
+[notmuch](https://notmuchmail.org/) - index and search your mail
+msmtp - send mail through shell commands
+imapfilter - rule-based filtering engine for your incoming mail
+vdirsyncer - mirror your contacts and calendars locally with two-way synchronization
+khal - terminal vdir-compatible calendar client
+calcurse - a pretty terminal calendar client, but not very vdir compatible
+taskwarrior - a super flexible terminal to-do list
+
+The module has three areas of concern: a functioning mail suite (receiving, sending, searching), to-do management, and contacts and calendaring.
+Take care that most of the credential/account setup of course is highly specific to my setup and should be changed as required.
+
+## mail
+
+The current mail setup uses `mbsync` (from the isync project) to locally mirror the GMail imap folder.
+It is run through a `sync-mail` script which can invoke pre- and post-sync hooks
+(e.g. run your incoming mail through filters as soon as they arrive or ingest them into full-text search engines).[^1]
+The sync script also automatically unlocks any pass directory so that credentials can be put into their respective applications and the directory closes again after use.
+`msmtp` is used for mail sending by neomutt (and git if using git send-email).
+`neomutt` then picks up the mail directory filled by `mbsync` and lets you browse it, respond to mail or create new ones.
+
+[^1]: That being said, the script is a little dusty and could probably use a little overhaul. It *works* but could be more fantastic I feel.
+
+## calendar and contacts
+
+For calendars and contacts, the wonderful `vdirsyncer` is used to sync everything from a remote Dav client (hard-coded to my server currently) to the local directories in documents.
+This is then picked up by `khal` to allow you to browse and edit your events, and create new ones - all of which in turn ends up remotely.
+
+You can also browse your events locally with `calcurse` which will import them on each startup, but will not sync back yet;
+meaning, any changes you do through the application will not reflect themselves back on any of your other connected devices unfortunately.
+
+## tasks
+
+Task management is done through the wonderful `taskwarrior`. I mostly use it as-is from the commandline, with some personal tweaks to urgencies and task dependencies.
+
+The goal here is to integrate taskwarrior relatively tightly into mail
+(e.g. receiving a mail and turning it into a task, then being able to go back from the task to the respective mail)
+and calendaring (turning a to-do into a calendar event, and creating to-dos for individual events right from the calendar),
+but those goals are still a ways off and the suite is working fine enough for now.

qutebrowser/.config/qutebrowser/alias.py

@@ -15,7 +15,9 @@ c.aliases["add-shaarli"] = "spawn --userscript shaarli_add.sh"
 c.aliases["send-to-archive"] = "open https://web.archive.org/web/{url}"
 
 # save current page to pdf file
-c.aliases["save_to_pdf"] = "spawn --userscript pagetopdf.sh"
+c.aliases["save-to-pdf"] = "spawn --userscript pagetopdf.sh"
+# open sci-hub pdf for doi
+c.aliases["send-to-scihub"] = "spawn --userscript doi2scihub"
 
 # translate current page / selection with google translate
 c.aliases["translate-page-google"] = "spawn --userscript translate_google.sh"
@@ -23,8 +25,17 @@ c.aliases[
     "translate-selection-google"
 ] = "spawn --userscript translate_google.sh --text"
 
+# open the current page in more readable version
+c.aliases["readable"] = "spawn --userscript readability"
+
 # print picture of current url as qr code
 c.aliases["show-qr"] = "spawn --userscript qr"
 
 # add a task of current page to taskwarrior
 c.aliases["taskadd"] = "spawn --userscript taskadd"
+
+# try to remove the cookie banner from a website
+c.aliases["cookie-block"] = "spawn --userscript qute-cookie-block"
+
+# open last downloads in dmenu-like
+c.aliases["recent-downloads"] = "spawn --userscript open_download"

qutebrowser/.config/qutebrowser/content.py

@@ -1,14 +1,14 @@
 c.content.blocking.enabled = True
 c.content.blocking.method = "both"
 c.content.blocking.adblock.lists = [
-    "http://www.malwaredomainlist.com/hostslist/hosts.txt",
-    "http://someonewhocares.org/hosts/hosts",
-    "http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext",
+    "https://www.malwaredomainlist.com/hostslist/hosts.txt",
+    "https://someonewhocares.org/hosts/hosts",
+    "https://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext",
     "https://secure.fanboy.co.nz/fanboy-cookiemonster.txt",
 ]
 c.content.blocking.hosts.lists = [
-    "http://winhelp2002.mvps.org/hosts.zip",
-    "http://malwaredomains.lehigh.edu/files/justdomains.zip",
+    "https://winhelp2002.mvps.org/hosts.zip",
+    "https://malwaredomains.lehigh.edu/files/justdomains.zip",
 ]
 c.content.blocking.whitelist = ["piwik.org"]
 c.content.autoplay = False

qutebrowser/.config/qutebrowser/maps.py

@@ -60,13 +60,13 @@ config.bind(
 )
 # Download shortcuts
 config.bind(lleader + "dd", "download", mode="normal")
-config.bind(lleader + "dp", "save_to_pdf", mode="normal")
+config.bind(lleader + "dp", "save-to-pdf", mode="normal")
 
 # open last download
-config.bind("gD", "spawn --userscript open_download")
+config.bind("gD", "recent-downloads", mode="normal")
 
 config.bind('"w', "add-wallabag", mode="normal")  # add current page to wallabag
-config.bind(";w", "hint links userscript wallabag_add.sh")  # add link to wallabag
+config.bind(";w", "hint links run add-wallabag")  # add link to wallabag
 config.bind('"s', "add-shaarli", mode="normal")
 
 config.bind('"a', "send-to-archive", mode="normal")
@@ -76,7 +76,10 @@ config.bind('"T', "translate-selection-google", mode="normal")
 
 config.bind('"q', "show-qr")
 
-config.bind(lleader + "r", "spawn --userscript readability")
+config.bind('"p', "send-to-scihub", mode="normal")  # view current page doi on scihub
+config.bind(";p", "hint links run send-to-scihub")  # view linked doi on scihub
+
+config.bind(lleader + "r", "readable", mode="normal")
 
 # set stylesheets for the browser to use
 config.bind(

qutebrowser/.config/qutebrowser/url.py

@@ -1,7 +1,7 @@
 from qutebrowser.api import interceptor
 
 c.url.searchengines = {
-    "#sci": "https://sci-hub.do/{}",
+    "sci": "https://sci-hub.ru/{}",
     "DEFAULT": "https://search.martyoeh.me/?q={}",
     "al": "https://wiki.archlinux.org/index.php/{}",
     "alt": "https://alternativeto.net/software/{}/?license=opensource",

qutebrowser/.local/share/qutebrowser/cookie-blockers/aol.com.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#consent-page > div > div > div > form > div.wizard-body > div.actions.couple > a"/>
+  <wait/>
+  <click element="#select-legit-all-purpose > span.toggleAll.toggle-accpet-all"/>
+  <click element="#consent-page > div > form > div.page-footer > div > div > button"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/consent.youtube.com.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#yDmH0d > c-wiz > div > div > div.NIoIEf > div.G4njw > div.qqtRac > div > div > div > a"/>
+  <wait/>
+  <click element="#yDmH0d > c-wiz > div > div > div > div.VP4fnf > div:nth-child(3) > div.uScs5d > div > div.uScs5d > div:nth-child(1) > div > button"/>
+  <click element="#yDmH0d > c-wiz > div > div > div > div.VP4fnf > div:nth-child(4) > div.uScs5d > div > div.uScs5d > div:nth-child(1) > div > button"/>
+  <click element="#yDmH0d > c-wiz > div > div > div > div.VP4fnf > div:nth-child(5) > div.IgeUeb > div.uScs5d > div > div.uScs5d > div:nth-child(1) > div > button"/>
+  <click element="#yDmH0d > c-wiz > div > div > div > div.VP4fnf > form > div > button"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/ebay.com.xml

@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <!-- TODO: You cannot block cookies on ebay -->
+  <click element="#gdpr-banner > div.gdpr-banner__wrapper > div > a"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/espn.com.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#onetrust-reject-all-handler"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/etsy.com.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#gdpr-single-choice-overlay > div > div.wt-overlay__footer.wt-pt-xs-3 > div.wt-overlay__footer__action.wt-display-flex-md.wt-flex-grow-md-1.wt-order-xs-1.wt-order-md-neg1.wt-justify-content-flex-end > button"/>
+  <wait/>
+  <click element="#gdpr-privacy-settings > div > div.wt-overlay__footer.wt-align-items-center > div.wt-overlay__footer__action > div > div:nth-child(3) > button"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/facebook.com.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+    <!-- TODO: Facebook changes IDs of buttons -->
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/foxnews.com.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#wrapper > div.notification-banner > div > a"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/geeksforgeeks.org.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <remove element=".hide-consent"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/google.com.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#EDu5ze > div"/>
+  <wait/>
+  <click element="#yDmH0d > c-wiz > div > div > div > div.VP4fnf > div:nth-child(4) > div.uScs5d > div > div.uScs5d > div:nth-child(1) > div > button"/>
+  <click element="#yDmH0d > c-wiz > div > div > div > div.VP4fnf > div:nth-child(5) > div.uScs5d > div > div.uScs5d > div:nth-child(1) > div > button"/>
+  <click element="#yDmH0d > c-wiz > div > div > div > div.VP4fnf > div:nth-child(6) > div.IgeUeb > div.uScs5d > div > div.uScs5d > div:nth-child(1) > div > button"/>
+  <click element="#yDmH0d > c-wiz > div > div > div > div.VP4fnf > form > div > button"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/healthline.com.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <!-- WARNING: The cookie-free version of this websites looks very different-->
+  <click element="#modal-host > div > div > div > div > div > div > div.css-zndjj2 > a"/>
+  <wait time="1000"/>
+  <click element="#__next > div.css-qbih8b > div > button.css-1glzvq1"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/indeed.com.xml

@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#onetrust-pc-btn-handler"/>
+  <click element="#cookie-preferences > div.save-preference-btn-container > button"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/instagram.com.xml

@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <!-- TODO: You cannot block cookies, only accept? -->
+  <click element="body > div.RnEpo.Yx5HN > div > div > div > div.mt3GC > button.aOOlW.HoLwm"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/linkedin.com.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#artdeco-global-alert-container > div.artdeco-global-alert.artdeco-global-alert--NOTICE.artdeco-global-alert--COOKIE_CONSENT > section > div > div.artdeco-global-alert-action__wrapper > button:nth-child(1)"/>
+  <wait time="1500"/>
+  <click element="body > header > a:nth-child(1) > li-icon"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/medicalnews.com.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#modal-host > div > div > div > div > div > div > div.css-zndjj2 > a"/>
+  <wait time="1000"/>
+  <click element="#__next > div.css-1m0hjq0 > div > button.css-1mzn52w"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/medicalnewstoday.com.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#modal-host > div > div > div > div > div > div > div.css-zndjj2 > a"/>
+  <wait/>
+  <click element="#__next > div.css-1m0hjq0 > div > button.css-1mzn52w"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/microsoft.com.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#wcpConsentBannerCtrl > div._2j0fmugLb1FgYz6KPuB91w > button:nth-child(2)"/>
+  <wait/>
+  <click element="#_1dp8Vp5m3HwAqGx8qBmFV2_c1_reject"/>
+  <click element="#_1dp8Vp5m3HwAqGx8qBmFV2_c2_reject"/>
+  <click element="#_1dp8Vp5m3HwAqGx8qBmFV2_c3_reject"/>
+  <click element="#wcpCookiePreferenceCtrl > div.AFsJE948muYyzCMktdzuk > div > div.nohp3sIG12ZBhzcMnPala > button._3tOu1FJ59c_xz_PmI1lKV5._1zNQOqxpBFSokeCLGi_hGr"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/netflix.com.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <!-- TODO: Clicking on the button does not work -->
+  <!-- <click element="#cookie-disclosure > div.cta-btn-container > button:nth-child(2)"/> -->
+  <!-- TODO: Workaround: Close -->
+  <click element="#cookie-disclosure > div.btn-container > button > span.icon-close"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/nytimes.com.xml

@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <!-- CANNOT OPT OUT OF EVERYTHING -->
+  <!-- TODO: Does not work? -->
+  <click element="#site-content > div.gdpr.shown.expanded.expanded-dock.css-17nqy7q.e1x0szx60 > div.css-183a15u.ejw0p350 > div > div.css-1s2i4vk > a"/>
+  <debug/>
+  <wait/>
+  <debug msg="After"/>
+
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(1) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(2) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(3) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(4) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(5) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(6) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(7) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(8) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(9) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(10) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(11) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(12) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-2 > tbody > tr:nth-child(14) > td:nth-child(5) > a:nth-child(2)"/>
+
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(1) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(2) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(3) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(4) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(5) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(6) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(7) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(8) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(9) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(10) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(11) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(12) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(13) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(14) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(15) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(16) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(17) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(18) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-3 > tbody > tr:nth-child(19) > td:nth-child(5) > a:nth-child(2)"/>
+
+  <click element="#gdpr-faq-cookie-table-4 > tbody > tr:nth-child(1) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-4 > tbody > tr:nth-child(2) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-4 > tbody > tr:nth-child(3) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-4 > tbody > tr:nth-child(4) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-4 > tbody > tr:nth-child(7) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#gdpr-faq-cookie-table-4 > tbody > tr:nth-child(8) > td:nth-child(5) > a:nth-child(2)"/>
+  <click element="#opt-out-of-new-york-times-nonessential-trackers"/>
+
+  <!-- TODO: Close the new tab -->
+  <!-- TODO: Close the banner -->
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/paypal.com.xml

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#manageCookiesLink"/>
+  <wait time="1000"/>
+  <click element="#performance"/>
+  <click element="#functional"/>
+  <click element="#submitCookiesBtn"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/reddit.com.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#SHORTCUT_FOCUSABLE_DIV > div:nth-child(6) > div._3q-XSJ2vokDQrvdG6mR__k > section > div > section > section > form:nth-child(1) > button"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/roblox.com.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#cookie-link-manage"/>
+  <!-- TODO: Not sure clicking the right thing -->
+  <click element="#cookie-btn-allow"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/stackoverflow.com.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="body > div.ff-sans.ps-fixed.z-nav-fixed.ws4.sm\\:w-auto.p32.bg-black-750.fc-white.bar-lg.b16.l16.r16.js-consent-banner > div > button.grid--cell.s-btn.s-btn__filled.js-cookie-settings"/>
+  <wait time="1000"/>
+  <click element="#onetrust-pc-sdk > div > div.s-modal--footer.mt0.grid.gs8.gsx > button.grid--cell.s-btn.s-btn__primary.save-preference-btn-handler.onetrust-close-btn-handler.js-consent-banner-hide.js-consent-save"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/steampowered.com.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#rejectAllButton"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/twitter.com.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#react-root > div > div > div.css-1dbjc4n.r-13qz1uu.r-417010 > main > div > div > div.css-1dbjc4n.r-1awozwy.r-1m3jxhj.r-1upvrn0.r-18u37iz.r-1d7fvdj.r-d9fdf6.r-tvv088.r-13qz1uu > div.css-18t94o4.css-1dbjc4n.r-1niwhzg.r-11mg6pl.r-sdzlij.r-1phboty.r-rs99b7.r-18kxxzh.r-1q142lx.r-1w2pmg.r-19u6a5r.r-1mnahxq.r-ero68b.r-1gg2371.r-1ny4l3l.r-1fneopy.r-o7ynqc.r-6416eg.r-lrvibr > div > span"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/wolframalpha.com.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <remove element=".oaDry"/>
+</block>

qutebrowser/.local/share/qutebrowser/cookie-blockers/yahoo.com.xml

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="utf-8"?>
+<block>
+  <click element="#consent-page > div > div > div > form > div.wizard-body > div.actions.couple > a"/>
+  <wait time="2000"/>
+  <!-- This is not my spelling mistake :)                           vvvvvv -->
+  <click element="#select-legit-all-purpose > span.toggleAll.toggle-accpet-all"/>
+  <click element="#consent-page > div > form > div.page-footer > div > div > button"/>
+</block>

qutebrowser/.local/share/qutebrowser/userscripts/doi2scihub

@@ -0,0 +1,116 @@
+#!/usr/bin/env python3
+"""
+Goes to the sci-hub page for the current article, based on DOI.
+
+
+Based on the work in
+https://github.com/cadadr/configuration/blob/4b6a241d04d113f322b960890a0d0a0ab783a7b3/dotfiles/qutebrowser/userscripts/doi
+with much gratitude.
+
+The program can be invoked with DOI on a page selected, through the hinting mode when selecting a DOI link or on a publisher page (any page where doi meta-tags are set) - works on ScienceDirect, Taylor&Francis, Springer, etc.
+That means you can give it a doi through a link or on the current page, for example with the following mappings:
+
+```python
+config.bind('"p', "spawn --userscript doi2scihub")
+config.bind(';p', "hint links userscript doi2scihub")
+```
+
+You can also pass the doi as the (only) argument to the userscript:
+
+```
+:spawn --userscript doi2scihub https://doi.org/10.37394/23207.2021.18.68
+`
+
+Updates its sci-hub link based on the one listed on sci-hub wiki page.
+"""
+
+
+import os
+import re
+import sys
+import html.parser
+import requests
+
+
+mode = os.getenv("QUTE_MODE")
+
+text = None
+
+class DoiTagParser(html.parser.HTMLParser):
+    doi = None
+
+    def handle_starttag(self, tag: str, attrs: list[tuple[str, str | None]]) -> None:
+        if self.doi == None and tag == "meta":
+            if (
+                ("name", "citation_doi") in attrs
+                or ("name", "dc.identifier") in attrs
+                or ("scheme", "doi") in attrs
+            ):
+                for att in attrs:
+                    if att[0] == "content":
+                        self.doi = att[1]
+                        break
+
+
+class SciHubLinkParser(html.parser.HTMLParser):
+    current = None
+    link_patt = re.compile(r"^(?P<url>https?://sci-hub\..+)/about$")
+
+    def handle_starttag(self, tag: str, attrs: list[tuple[str, str | None]]) -> None:
+        if self.current == None and tag == "a":
+            for att in attrs:
+                if att[0] == "href" and self.link_patt.match(att[1] or ""):
+                    match = self.link_patt.match(att[1] or "")
+                    self.current = match["url"] if match and match["url"] else None
+
+
+def get_scihub_url(wiki_page: str = "https://wikiless.org/wiki/Sci-Hub"):
+    resp = requests.get(wiki_page)
+    parser = SciHubLinkParser()
+    parser.feed(resp.text)
+    return parser.current or "https://sci-hub.ru"
+
+
+# use doi argument if we got one
+if len(sys.argv) > 1:
+    text = sys.argv[1]
+# use the hinted url
+elif mode == "hints":
+    text = os.getenv("QUTE_URL", "").strip()
+# use the current selection
+elif mode == "command" and os.getenv("QUTE_SELECTED_TEXT"):
+    text = os.getenv("QUTE_SELECTED_TEXT", "").strip()
+# just try to find a doi on current page
+elif os.getenv("QUTE_HTML"):
+    with open(os.getenv("QUTE_HTML", ""), "r") as source:
+        parser = DoiTagParser()
+        parser.feed(source.read())
+        text = parser.doi
+
+with open(os.getenv("QUTE_FIFO", ""), "w") as fifo:
+    if not text:
+        fifo.write(f'message-warning "Could not find a valid DOI"')
+        sys.exit()
+
+    # DOI syntax: https://www.doi.org/doi_handbook/2_Numbering.html#2.2.
+    #
+    # Note that this probably matches a subset of possible DOIs, as it
+    # seems that there’s no practical limitation on neither the length nor
+    # the contents of the DOI.  But IMHO this is a healthy subset.
+    doi_re = re.compile(
+        # match possible URI prefix
+        r"(?P<blah>((https?)?://)?doi\.org/)?"
+        # match actual DOI
+        r"(?P<meat>[a-zA-Z0-9\./\-_]+)"
+    )
+
+    match = doi_re.match(text)
+    if match is None or match["meat"] is None:
+        fifo.write(
+            f"message-warning \"'{text}' is probably not a DOI, or update regexp\""
+        )
+
+    else:
+        url = get_scihub_url()
+        doi = match["meat"]
+        fifo.write(f"open -t {url}/{doi}")

scripts/.local/bin/powermenu

@@ -13,6 +13,7 @@
 # POWERMENU_LOCKSCREEN_CMD=""
 # POWERMENU_LOGOUT_CMD=""
 # POWERMENU_SUSPEND_CMD=""
+# POWERMENU_HIBERNATE_CMD=""
 #  Command chooser options
 # POWERMENU_PICKER_CMD=""
 # POWERMENU_PICKER_OPTS=""
@@ -26,6 +27,7 @@ elif [ "${POWERMENU_SHOW_ICONS:-1}" -eq 1 ]; then
     reboot_btn=""
     lock_btn=""
     suspend_btn="鈴"
+    hibernate_btn="鈴"
     logout_btn=""
 fi
 if [ "${POWERMENU_SHOW_TEXT:-1}" -eq 1 ]; then
@@ -33,6 +35,7 @@ if [ "${POWERMENU_SHOW_TEXT:-1}" -eq 1 ]; then
     reboot_btn="${reboot_btn} Restart"
     lock_btn="${lock_btn} Lock Screen"
     suspend_btn="${suspend_btn} Suspend"
+    hibernate_btn="${hibernate_btn} Hibernate"
     logout_btn="${logout_btn} Log Out"
 fi
 
@@ -46,7 +49,7 @@ fi
 selector_program="${POWERMENU_PICKER_CMD:-bemenu}"
 selector_opts="${POWERMENU_PICKER_OPTS:--i}"
 
-menu=$(printf "%s\n" "$lock_btn" "$suspend_btn" "$power_off_btn" "$reboot_btn" "$logout_btn")
+menu=$(printf "%s\n" "$lock_btn" "$suspend_btn" "$power_off_btn" "$reboot_btn" "$hibernate_btn" "$logout_btn")
 # shellcheck disable=SC2086
 result=$(printf "%s" "$menu" | $selector_program $selector_opts --prompt "$prompt")
 
@@ -78,6 +81,11 @@ case "$result" in
     ;;
 "Suspend" | "$suspend_btn")
     if [ -n "$POWERMENU_SUSPEND_CMD" ]; then eval "$POWERMENU_SUSPEND_CMD"; else
+        systemctl suspend-then-hibernate
+    fi
+    ;;
+"Hibernate" | "$hibernate_btn")
+    if [ -n "$POWERMENU_HIBERNATE_CMD" ]; then eval "$POWERMENU_HIBERNATE_CMD"; else
         systemctl hibernate
     fi
     ;;

scripts/.local/bin/vidl

@@ -92,24 +92,36 @@ _alreadyexists() { # 1=video_regex
     fi
 }
 
+_should_archive() {
+    if [ -n "$ARCHIVE_FOLDER" ]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
 _download_cmd() {
     "$YT_DL_CMD" \
-        -o "$DL_FOLDER/$YT_DL_TITLE.%(ext)s" \
+        -o "$TEMP_FOLDER/$YT_DL_TITLE.%(ext)s" \
         "${YT_DL_OPTS[@]}" \
         "$*"
 }
 
 download() { # 1=url
     # # download the video to download folder
-    if ! _alreadyexists "$yt_dl_fname"; then
+    if ! _alreadyexists "$yt_dl_fname" || ! _should_archive; then
         _download_cmd "$*"
+        file=$(_findfile "$TEMP_FOLDER" "$yt_dl_fname")
+        mv "$file" "$DL_FOLDER"
 
+        if _should_archive; then
             # yt-dl never knows the exact filename in advance
             file=$(_findfile "$DL_FOLDER" "$yt_dl_fname")
             if [ -z "$file" ]; then exit 1; fi
             _call_archive "$file" "$ARCHIVE_FOLDER"
+        fi
     # only link old file if one exists
-    else
+    elif _should_archive; then
         archive_file=$(_findfile "$ARCHIVE_FOLDER" "$yt_dl_fname")
         echo "$archive_file" | while read -r file; do
             echo "file $file exists, not downloading duplicate"
@@ -119,8 +131,9 @@ download() { # 1=url
 }
 
 setup() {
-    DL_FOLDER="${DL_FOLDER:-${XDG_VIDEOS_DIR:-$HOME/videos}}/inbox"
-    ARCHIVE_FOLDER="${ARCHIVE_FOLDER:-${XDG_VIDEOS_DIR:-$HOME/videos}}/archive"
+    TEMP_FOLDER="${TEMP_FOLDER:-${HOME}/downloads}"
+    DL_FOLDER="${DL_FOLDER:-${XDG_VIDEOS_DIR:-$HOME/videos}/inbox}"
+    ARCHIVE_FOLDER="${ARCHIVE_FOLDER:-${XDG_VIDEOS_DIR:-$HOME/videos}/archive}"
     YT_DL_CMD="${YT_DL_CMD:-yt-dlp}"
     yt_default_opts=(-f "best[height\<=1080]" --retries 15 --embed-subs --sub-lang "en,de,es,fr")
     declare -a YT_DL_OPTS=${YT_DL_OPTS:-( "${yt_default_opts[@]}" )}

services/.config/systemd/user/mbsync.service

@@ -5,4 +5,5 @@ After=network.target network-online.target dbus.socket gpg-agent.socket
 
 [Service]
 Type=oneshot
-ExecStart=/home/marty/.local/bin/mail-check
+# workaround to allow relative executable invocation (i.e. current users' home dir)
+ExecStart=/bin/bash -c '%h/.local/bin/sync-mail'

sh/.config/sh/env

@@ -20,7 +20,17 @@ export LIBRARYROOT="${LIBRARYROOT:-$HOME/documents/library}"
 export BIBFILE="${BIBFILE:-$LIBRARYROOT/academia/academia.bib}"
 
 # these are my personal 'important' application settings
-export EDITOR="nvim"
+if exist nvim; then
+    export EDITOR="nvim"
+elif exist vim; then
+    export EDITOR="vim"
+elif exist vi; then
+    export EDITOR="vi"
+elif exist micro; then
+    export EDITOR="micro"
+else
+    export EDITOR="nano"
+fi
 export BROWSER="qutebrowser"
 export TERMINAL="wezterm"
 export PAGER="less"

sh/.config/sh/xdg

@@ -84,6 +84,10 @@ export LESSHISTFILE="XDG_STATE_HOME/lesshst"
 export MPLAYER_HOME="$XDG_CONFIG_HOME/mplayer"
 export NODE_REPL_HISTORY="$XDG_STATE_HOME/node_repl_history"
 export NVM_DIR="$XDG_DATA_HOME/nvm"
+if [ ! -e "$PYTHONSTARTUP" ]; then
+    mkdir -p "$XDG_CONFIG_HOME/python"
+    touch "$PYTHONSTARTUP"
+fi
 export PYTHONSTARTUP="$XDG_CONFIG_HOME/python/pythonrc"
 export SQLITE_HISTORY="$XDG_STATE_HOME/sqlite_history"
 export TEXMFVAR="$XDG_CACHE_HOME/texlive/texmf-var"

taskwarrior/.config/task/colorscheme

@@ -1,19 +0,0 @@
-# Themes are in this file so it can be ignored by
-# git and theme changes don't show up as committable
-# edits.
-
-# Color theme (uncomment one to use)
-#include /usr/share/doc/task/rc/light-16.theme
-#include /usr/share/doc/task/rc/light-256.theme
-#include /usr/share/doc/task/rc/dark-16.theme
-#include /usr/share/doc/task/rc/dark-256.theme
-#include /usr/share/doc/task/rc/dark-red-256.theme
-#include /usr/share/doc/task/rc/dark-green-256.theme
-#include /usr/share/doc/task/rc/dark-blue-256.theme
-#include /usr/share/doc/task/rc/dark-violets-256.theme
-#include /usr/share/doc/task/rc/dark-yellow-green.theme
-#include /usr/share/doc/task/rc/dark-gray-256.theme
-#include /usr/share/doc/task/rc/dark-gray-blue-256.theme
-include /usr/share/doc/task/rc/solarized-dark-256.theme
-#include /usr/share/doc/task/rc/solarized-light-256.theme
-#include /usr/share/doc/task/rc/no-color.theme

taskwarrior/.config/task/taskopenrc

@@ -1,10 +0,0 @@
-[General]
-taskbin = task
-path_ext = /usr/share/taskopen/scripts
-
-[Actions]
-notes.regex = "Note"
-notes.command = "$EDITOR ${XDG_DATA_HOME:-~/.local/share}/task/notes/$UUID.md"
-
-[CLI]
-

wayland/.config/river/init

@@ -3,6 +3,9 @@
 mod="Mod4"
 modemod="Mod1"
 term=${TERMINAL:-foot}
+time_to_lockscreen=300
+time_to_screendim=600
+time_to_suspend=1200
 
 ## OPTIONS
 riverctl spawn "dbus-update-activation-environment SEATD_SOCK DISPLAY WAYLAND_DISPLAY XDG_CURRENT_DESKTOP=river"
@@ -241,8 +244,19 @@ killall waybar
 exec waybar &
 
 # start dynamic display configuration
+killall kanshi
 exec kanshi &
 
+# start screen idle locking/dimming/sleep tool
+killall swayidle
+exec swayidle \
+    timeout "${time_to_lockscreen}" 'lockscreen' \
+    timeout "${time_to_screendim}" 'wlopm --off "*"' \
+    timeout "${time_to_suspend}" 'systemctl suspend-then-hibernate' \
+	resume 'wlopm --on "*"' \
+	after-resume 'wlopm --on "*"' \
+    before-sleep 'lockscreen' &
+
 killall clipman
 exec wl-paste -t text --watch clipman store &
 # bash ~/.config/bin/gtktheme # setting our gtk variables

wezterm/.config/wezterm/events.lua

@@ -58,6 +58,20 @@ local function setup()
         wezterm.sleep_ms(1000)
         os.remove(name)
     end)
+
+    wezterm.on("toggle-leader", function(window, pane)
+        wezterm.log_info("toggling the leader")
+        local overrides = window:get_config_overrides() or {}
+        if not overrides.leader then
+            wezterm.log_info("leader wasn't set")
+            overrides.leader = { key = "s", mods = "SUPER" };
+        else
+            wezterm.log_info("leader was set")
+            overrides.leader = nil
+        end
+
+        window:set_config_overrides(overrides)
+    end)
 end
 
 return { setup = setup }

wezterm/.config/wezterm/maps.lua

@@ -73,7 +73,8 @@ local keys = {
         key = 'l',
         mods = 'LEADER',
         action = act.EmitEvent 'ActivatePaneDirection-Right'
-    }
+    },
+    { key = 'a', mods = 'CTRL|ALT', action = act.EmitEvent 'toggle-leader'}
 
 }
 -- Leader + number to activate that tab
@@ -108,6 +109,6 @@ local key_tables = {
         { key = 'g', mods = 'CTRL', action = act.ScrollToTop },
         { key = 'G', mods = 'CTRL', action = act.ScrollToBottom },
         { key = 'Escape', action = 'PopKeyTable' }
-    }
+    },
 }
 return { keys = keys, key_tables = key_tables }

zsh/.config/zsh/.zshrc

@@ -31,7 +31,6 @@ source /usr/share/fzf/key-bindings.zsh
 [ -e $PLUG_FOLDER/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh ] && source $PLUG_FOLDER/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh
 [ -e $PLUG_FOLDER/alias-tips/alias-tips.plugin.zsh ] && source $PLUG_FOLDER/alias-tips/alias-tips.plugin.zsh
 [ -e $PLUG_FOLDER/zsh-autosuggestions/zsh-autosuggestions.plugin.zsh ] && source $PLUG_FOLDER/zsh-autosuggestions/zsh-autosuggestions.plugin.zsh
-[ -e $PLUG_FOLDER/zsh-vi-mode/zsh-vi-mode.plugin.zsh ] && source $PLUG_FOLDER/zsh-vi-mode/zsh-vi-mode.plugin.zsh
 unset PLUG_FOLDER
 
 # simple fzf-tab settings