flash.nvim was activating on searches which, while perhaps useful
for some people, was not for me. It stops the (incremental) search
as soon as no valid target exists which drops you back into normal
mode while still typing out the search and thus doing
who-knows-what.
The operator pending mode for the original jump mapping has been
removed to allow the 'surround' mappings from mini plugin to
always work correctly (`ysiw`, `csaw`, ...).
Since treesitter is deprecating modules we switch to the new fork of the
plugin which works without any use of treesitter modules.
A painless switch since I only use the default settings of the plugin
anyway.
Add 'glances.nvim' plugin which shows the LSP references, definitions and
implementations in a very nice floating preview window. (Previously we
used Telescope which is still called if the glances plugin does not
exist.)
Can preview, scroll in the floating window, go to the destination, open
the destination in vert/horiz splits.
If the cursor was on the very first letter of a word it would fix
the misspelled word instead - now it should stay and fix the
current word under cursor instead.
Flash.nvim provides a very tasty remote editing functionality which lightspeed
does not. Otherwise it behaves *mostly* the same. For now, I have the flash
search label functionality activated (default) but if it is annoying I will
turn it off (It injects labels into the normal neovim search. So if you search
a word and want to go directly there, you just press the label key as part
of the search and it jumps there. This might be problematic if I quickly type
something that does not exist but it picks up a non-existent letter as label
instead.)
Otherwise, the remote editing functionality is activated by
<operator>r<label><movement>, such as `yr<label>iw` to yank inside a word
somewhere else and stay at the current position. Similarly for example
`cr<label>$` to change from the label to the end of the line and then jump
back to the original position and so on.
Slightly adapt lualine to not have arrow section/component dividers,
but simple slanted lines. Gets rid of a tiny bit of noise while still
clearly subdividing the sections for me which I need.
Also, removed displaying the hostname. I know which host I am on
generally, and rarely make use of it so it's just unnecessary info
for me.
Since I would like to keep my plugin configurations as modular as possible
I think it is a good first step to move the mini configuration directly
into the core plugin file where mini is loaded. Since this is the plugin
spec I want to take to basically any nvim installation I have, having it
in a single file makes it much easier to be portable.
Toggleterm, as nice as it is, is not one of my core dependencies.
I do not 'need' toggleterm on every nvim installation I have. Instead,
it can go into ui-related plugins since that is what it does, extend
nvim's UI functionality with new terminal dropdowns/floats.
Removed vim-exchange which, while an amazing functionality, is also
exactly replicated in mini.nvim (along with even more operators).
Uses slightly different mapping - not `cx<movement>` anymore but
`gx<movement>`. But this actually makes sense and fits in well with
my other g-prefixed operators (`gc` for comment and `ga` for align).
It is also the prefix for the other additional operators supplied
by mini.operators: `gs` for sorting text, `gm` for multiplying,
`gr` for replacing, `g=` for evaluating.
Since we already have the mini library installed in our setup, we don't
need to make use of external base16 plugins. It provides the same exact
functionality, and seems slim and bug-free. Nothing changes for the
user, but we have 1 plugin less to take care of (and it was
mis-behaving in new versions anyway).
Also set lualine to be reloaded on theme switch so it takes on the
colorscheme as well.
Added mapping to insert a link to an existing Zettel with
`<localleader>ni` (note insert), either from normal mode which creates
the complete link, or from visual selection mode which surrounds the
current selection (as visible link text) with the link.
New zettel links still use my own implementation so I have full control
over their naming scheme.
When switching the current buffer to the Zettelkasten index page
(`<leader>ni`), we now also switch the working directory to the
corresponding notes directory.
Setting `vim.g.disable_autoformat` to true will disable automatic linting globally,
though I have not set up commands or mappings for manual linting. It is also
missing buffer-local linting which could be copied from buffer-local formatting.
Moved loading and setting up file watching to the loading of the plugin itself.
Will make it a little more self-contained and not crash or complain if we are
missing the plugin.
HACK
At the same time, reverted back to pinned base16 commit since the new one did
not work again. Gotta figure it out at some point but no time now.
Since I am already using fidget.nvim for lsp notifications, might as well use it
for other, more explicit ones. Removed nvim-notify in favor of this since I like
how unobtrusive the notifications are (and let's be honest, most you don't need
to pay attention to, instead they just take you out of flow).
Using mason-tool-installer we ensure everything is installed correctly.
Need to improve the collection of things to install. Currently we just
do everything in lsp configuration file, even the non-lsp things
(formatters/linters) which should be sourced where they belong not
in that file.
Moved the mapping to show lsp info window from `<localleader>li` to
`<leader>vs`.
Local leader +l mappings should be reserved for lsp functionality,
while we have a whole +v layer to grab (meta) information about our
vim installation. It fits in there much better.
In the process of moving away from null-ls, added formatting with the help
of conform.nvim. Brings one new command, :ConformInfo which can also be
reached via `<leader>vc`.
AutoFormat on saving remains disabled by default but can be enabled with
:FormatEnable (and disabled again with :FormatDisable) or quickly through
`<localleader>lL`.
Manual formatting works like before with `<localleader>ll`. Uses the
formatters set in the plugin (similar setup to null-ls before) but
automatically falls back to lsp formatters if it does not have its own
and lsp has one enabled.
Mappings preceded by <leader>s 'show' something so removed a lot of the 'toggle'
wording from their descriptions.
Subsumed the toggleterm toggles under this menu since they 'show' a term window
(lazygit or ipython).
Changed Aerial mappings to show navigator by default (`<leader>so`) and the
sidebar outline only on capital version (`<leader>sO`) since this mapping is
used less often.
Removed broken molten-image setup.
Image nvim works mostly well (slow on wezterm but that will always be the case
with kitty protocol for now as far as I know).
Would love to be able to toggle images on/off dynamically but I don't see a
way to accomplish that now. (or really, get to any option of the plugin).
Molten itself also works well - the output is displayed more nicely than for
the Magma plugins and everything continues working mostly well (or rather,
just as wonky as I had it set up on my older magma install :)
For now, the molten - image.nvim integration seems to not work at all -
it simply errors out when it would produce an image as output. No clue why
and it also complains about the wrong image provider (which I have taken from
the molten readme). No time to bugfix now but maybe at some point.
To do - find a much better way of installing the image.nvim required
luarock magick - done manually with hardcoded path in setup now
Also extended the old `py` alias to a full-blown script which will in
addition to detecting the python repl also find any running molten
session for the current directory (i.e. any running jupy kernel) and let
the user choose the right one if there is multiple. Will then default to
starting a kernel-aware repl environment (euporia or jupyter-console).
Added a very simple `-c` option which lets you choose python command to
run manually.
HACK
Added support for nushell lsp (not yet available to automatically install
through mason integration) and for nushell treesitter (VERY manual
installation as of right now).
Will work for testing out the shell and its nvim integration but
definitely has to be integrated better in the future.
When writing something we often want to ideally hide the long comments
added to the end of any line in-progress as virtual text currently.
This simply adds an auto-command to hide when entering and show again
when exiting insert mode, simple but hopefully useful.
If you want to hide buffer diagnostics for any reason, there is now a
quick mapping reachable through the usual lsp submenu: `<localleader>lo`
(I suppose the mnemonic would be 'lsp off').
It toggles them enabled and disabled and only affects the current
buffer.
Mapped de-/activating zen mode to <leader>sz which means it belongs
to the '+s' group of mappings which generally activate or deactivate
showing something in nvim.
Previously belonged to <leader>vz which rather is a group changing
something about nvim configuration itself.
Updated mappings to enable spell checking slightly: <ll>ZZ enables all
languages (german, us, gb) <ll>ZE only US spellcheck, <ll>ZB GB
spelling and <ll>ZD German spelling.
HACK base16 plugin changed something in its internal application
of highlights so that not all highlights get correctly applied
when my nvim setup boots up. Have to investigate.
Added markmap plugin to make mindmaps from markdown. Uses
headings for leaves, and works pretty automatically.
Testing its functionality longer-term for now.
Removed notification on activating a python venv.
It should just work, transparent to the user and we do
not need a big ol' notification each time we enter
a file.
Can edit (`<ll>ce`), jump-to (`]c`, `[c`), insert (`<ll>co`,
`<ll>cO`) and run (`<ll>cc`) code cells in markdown files.
They will not be evaluated as part of an overall repl but
only stand-alone!
Automatically set formatting mode to soft for markdown, text and asciidoc files.
Also automatically format on startup (no lazy-loading), and thus have
nicely word-ending linebreaks (a word will not just be cut off wherever the
line is over but will be fully moved to the next line instead).
Added neotest with some mappings to run tests and view
outputs, as well as neotest-python for now to make it
work under python.
Added registering with which-key if it exists.
Mapped to `[D` / `]D`, reflecting the capitalization of going to the
next general diagnostic (`[d`/`]d`).
Now it is similar to spelling mistakes and spelling errors
(`]s[s`/`]S[S` respectively).
Since we move between git chunks with ]h/[h, we may as well
move between git *conflict* chunks (should there be any)
with ]H and [H mirroring the diagnostics/error setup
situation.
Added simple merge conflict highlighting and resolution through
git-conflict.nvim plugin.
Allows moving to the next/prev conflict with ]x or [x respectively,
then resolving the conflict currently hovered by using ours/theirs/
both/or neither of the offered options (with `ho/hO/hm/hM`
respectively).
Enabled bracketed module of mini.nvim plugin, which enables many
(many!) more bracket jumping options. Some examples are moving
through the bufferlist, comments, files, jumplist, etc with [
and ]. Integrated into whichkey through pre-defined 'desc'
options for each mapping.
Default the option to disable on formatting on save, but add new
key mapping to toggle it on (`<leader>sa`) and off. Still
the remaining issue of files always being 'unsaved' state when
using formatting on save, but this allows quicker toggling for
now.
Added simple highlighting plugin for prose headlines (and code
snippets). Will highlight the whole line a little from the
background and provide more space around it so it stands out.
Currently works (afaik) for markdown, rmd, norg filetypes.
Move from simrats symbols outline which worked very well but had
specific issues for displaying markdown outlines as soon as any
lsp would attach itself to the same buffer.
Aerial seems to not suffer from those issues so this is the one
we will go with for now.
If tracking stable (versioned) releases, it can get out of sync
with LSPs and display errors on startup - since the stable
version gets updated very rarely (over half a year ago currently)
but LSPs and their configs change more rapidly. Since the master
branch seems stable enough we will simply track this instead
for now.
With the new lazy loaded plugin structure, Magma would not start correctly.
This commit simply removes the lazy designation for Magma, Quarto and the
Jupyter attachments.
It also uses the python environment detection utility to set the correct
python executable on entering a quarto file (if there exists a virtual
environment for the project).
When writing a markdown or similar document, vale will automatically
be enabled if there is a '.vale.ini' or '_vale.ini' file (and a
corresponding styles folder) in the project root directory.
Otherwise, vale stays disabled.
The plugin was not loading since lazyloading was not given an event
to start it with. Now, anytime any zk command is given, or we enter
a prose-like filetype the plugin is sourced.
The zk lsp on the other hand was started twice whenever the plugin
was loaded, since we also loaded it through the lspconfig manually.
This commit fixes both issues by sourcing and plugin and letting the
plugin load the lsp as well.
The utility terminals (lazygit and python repl for now) can now be hidden
even from terminal insert mode (i.e. when interacting with them) with
<C-\>. They can be invoked through their usual chords (<leader>tg and
<leader>tp respectively) again and will pick right up where you left off.
Insert mode in terminals can also be left slightly easier should it
be needed: Instead of the <C-\><C-n> chord you can use j\.
Lastly, the utility terminals can be started in a vertically docked mode
instead of floating. This is done by adding a bang to their commands,
`Lazygit!` and `Pythonterm!`, or using capital versions of their
mappings: <leader>tG and <leader>tP.
Moved plugins into individual component module files which are
automatically required by lazy.nvim. Should make everything a tiny bit
more modular, or at least prepare the way for true modularity if I ever
have the time on my hands to ensure everything works with missing
modules.
Moved core settings into their own directory (`core`), and created a
`personal` folder which contains functions/plugins I wrote that do not
necessarily have to be their own imported plugin yet.
Finally, extended the utility functions a little, so we can detect if a
plugin exists and change e.g. key maps based on that (once again,
extending modularity a little more). Some simple attempts have been made
at that in the `mappings.lua` file, though it is nowhere near extensive
yet - most keymaps are still set regardless of plugin availability.
However, with this slimmer base to work off of, I feel more confident in
changing future things about this setup a little more ad-hoc without
having as many ripple repercussions as before.
# This is the 1st commit message:
nvim: Restructure lua dir
Moved plugins into individual component module files which are
automatically required by lazy.nvim. Should make everything a tiny bit
more modular, or at least prepare the way for true modularity if I ever
have the time on my hands to ensure everything works with missing
modules.
Moved core settings into their own directory (`core`), and created a
`personal` folder which contains functions/plugins I wrote that do not
necessarily have to be their own imported plugin yet.
Finally, extended the utility functions a little, so we can detect if a
plugin exists and change e.g. key maps based on that (once again,
extending modularity a little more). Some simple attempts have been made
at that in the `mappings.lua` file, though it is nowhere near extensive
yet - most keymaps are still set regardless of plugin availability.
However, with this slimmer base to work off of, I feel more confident in
changing future things about this setup a little more ad-hoc without
having as many ripple repercussions as before.
# This is the commit message #2:
Update settings file with 0.9 options
# This is the commit message #3:
Move lazy.nvim setup into core module
# This is the commit message #4:
Rename maps.lua to mappings.lua
Formatting and linting should from now be done with null_ls instead
of formatter.nvim (and nothing for linting so far).
This will still take a little to fully transition, for now we use
null_ls for eslint linting and prettier formatting for a variety
of javascript/typescript and astro files.
null_ls uses Mason installations under the hood and any tool it
uses also gets installed by Mason.
Automatic completion from full-text search was draining battery and generally not too helpful.
Disabled (commented) for now, can be re-enabled more specifically.
Notations will be concealed automatically on entering a textual buffer
and `$...$` style notations are contained.
Concealing can be turned off with <localleader>sV, which will toggle
concealing on or off for all notations in the file.
Additionally, the notation under curser can be viewed in a popup with
<localleader>sv.
In addition to my standard file manager, vifm, being integrated into
neovim, I have now also added a side-pane file tree (akin to nerdtree)
that is easily reachable to get a quick overview of a file layout.
For now, I do not intend to do much more with the plugin, only keep it
for those rare cases I want to have a view on my file layout at the same
time as working in a buffer. For all other things (file operations
especially) I still have vifm.
Added fidget plugin which shows the current loading status of LSPs. Only
works for a few LSP (so far), including lua and python. Should
automatically pick up new implementations on update. Will display a
small loading notification in the lower right corner, useful to display
status for those situations where LSP loading takes a long time (e.g.
rust compilation requirements or a large python environment).
FIXME Does not work for each python environment startup yet, and I am
not sure why - sometimes just does not display its loading startup.
When completing in command line I want the completion canditates to be
displayed, but *not* selected on confirmation. By doing so, it makes it
almost impossible to quickly quit with ':q' or write with ':w' for
example, as those always try to expand themselves automatically into
completion items.
This commit changes the default behavior for command mode to show
completions but not auto accept any on confirmation, instead simply
invoking whatever is currently on the command line (as if we had no
completion plugin running).
Whereas previously we had lsp-related mappings both on <localleader>l...
and g... mappings, they are now all unified under the <localleader>l
prefix group. Some mnemonics unfortunately had to give way to a weaker
version of themselves (definition becomes de[f]inition, implementation
becomes i[m]plementation) but overall I believe this to be much more
cohesive for my future lsp usage. With which-key enabled and everything
under the +l group we should be able to easily adapt to the new
mappings.
Additionally, some mappings will invoke the telescope version of their
lsp command if telescope is indeed installed, otherwise fall back to the
native neovim lsp implementation.
Switched the configuration of lsp-zero to its less integrated v2
version. Switched back to manually configuring most of nvim-cmp.
Addded some manual formatting to cmp which displays completion kind as
icons not as text.
Manually add luasnip integration.
