Added interactive python repl commands with two plugins:
Sending repl snippets over with vim-slime and interacting with python
(notebook-like) snippets in the editor with vim-ipython-cell.
Cells are simply demarcated by `## ` at the beginning of a line, though
they can have other syntaxes as well, e.g. `# %% `.
By default slime sends its commands over to the last used tmux pane so
it is easy to set up a split coding/repl-ing session.
Interaction mappings all center around <leader>c + another key.
You can send a simple cell with `<leader>cc` or `<leader>C`,
single lines or selections with `<leader>cs`.
You can switch between cells with `]c` `[c` and insert new ones
below/above existing ones with `<leader>co` `<leader>cO` respectively.
Switched out the deprecated nvim-compe for nvim-cmp and re-added most of
the plugins that the earlier one supported.
The handling is very similar and it supports the same snippet engine
(vsnip in this case).
Moved border snapping/aligning to a quicker key combination
(mod+ctrl+hjkl) and instead move rivercarro layout changes t the more
inaccessible extra moving mode (alt+r).
Added notification dismissal and recovery key binds to river key
bindings. This is necessary since in wayland dunst can't just
receive key presses anymore.
The new key binds are:
```
Mod+N - dismiss 1 notification
Mod+Shift+N - dismiss all notifications
Mod+Control+N - display last dismissed notification(s) again
```
Added script for downloading videos with ytdl or any of its derivatives.
The script is adapted from one in my rapberry pi setup which serves
videos remotely, and makes some hardcoded assumptions that might not be
the best for all situations.
Added archive script which takes a file and puts a hardlink to it into
an arbitrary archival folder. This means even if the original file is
deleted its data stays on disk because of its hardlinked archive
version.
Added ways of navigating the command mode similar to unix readline or
fzf lists.
^N / ^P will get you up and down the history / completion options
^J / ^K will get you up the last typed commands
^U / ^A / ^E / ^F / ^B / ^H manipulate the caret on the commandline.
The fontconfig in use previously accidentally got deleted amidst the X
leftovers. This reinstates it and streamlines it a tiny bit.
Still uses Iosevka as the default mono font, Heuristica and Noto Sans as
the serif and sans-serif respectively and adds the fantasy and comic
families.
Also takes over wholly the font hinting and aliasing settings, since
they work very well on my machine.
Added a simple wayland configuration.
Currently set up simple wayland configuration based on river window
manager and waybar.
Rivercarro is the layout manager, being the same in principle as rivertile,
the default layout manager for river, only it comes with smart gaps
(gaps turn off if there is only one window open)
and monocle mode (give one window all space).
Runs `keyd` in the background to replace the old `xcape` capslock switching
(capslock is escape and if held control).
Uses `swaybg` to set a wallpaper.
Added powermenu and lockscreen scripts.
Improved lockscreen script to detect and work for wayland.
Moved old rofi mode 'powermenu' to more general powermenu script,
which works with any rofi-like selector (dmenu, bemenu, wofi, etc.)
Loses some of its design quality but since it was wonky anyway,
and I rarely see the menu,
we could repurpose its functionality for a more general powermenu
concept.
Currently hardcoded for `bemenu` but can be easily swapped and possibly
even extended back to rofi.
Fixed file upload link sharing to clipboard.
Updated rofi-pass to pass-pick.
Made rofi-pass universal and less integrated to rofi - that's also the
reason for the name change.
`pass-pick` works with rofi (default), bemenu or dmenu. In theory it
should also work with any other picker that contains a stdin listing
function similar to dmenu.
It has been definitely tested both on rofi and bemenu.
The best user experience still reigns on rofi, where available keys are
displayed on the picker and the keys themselves make the most sense.
But all functions can be reached from bemenu as well, though the key
mappings are more arbitrary and can not be changed as in rofi.
The autofilling tool works with both xdotool and ydotool, so should work
both on X11 and on Wayland. Ydotool ideally requires its daemon to be
running, otherwise some of the typing may get gut off. Otherwise no
change should be necessary.
Updated qutebrowser open_download for bemenu.
Updated download opening script to work with both rofi and bemenu.
Prefers original rofi implementation but works with both, and can be set
to use a custom dmenu-like file picker as well.
Add brightnessctl and removed custom audio / brightness scripts since they
became unnecessary.
Updated bootstrap script to include system files:
With `keyd` taking its configuration from the `/etc` directory and not
home, a second stow stage was necessary. These stow files are in a
module called `system-packages` inside the top-level `bootstrap` stow
package.
They will not be installed by the default dotfile stow invocation but
have been integrated as an extra step into the install script.
Installing this module requires sudo privileges!
Switched vifm überzug to sixel graphics rendering.
überzug relies on X11 functionality to work, while sixel does not.
Unfortunately, alacritty does not work with sixel graphics yet, only
foot does (somewhat).
Waybar currently runs the gruvbox dark soft color scheme.
Added the old polybar archupdates script to waybar and extended it to
output json format with additional metadata that waybar can read.
Can still output the old plaintext format that polybar expects.
Added a wireguard connection to waybar,shows if currently
connected to either a wireguard or tun VPN service.
If so, shows an icon in the waybar - that can be hovered over to show
the full assigned IP address.
Added an upcoming event display to waybar,
a simple event indicator to show upcoming events on the calendar, on
hovering over it the tooltip lists all upcoming events.
Added `screenshot` script to take simple screenshots and
rectangle region shots of the current output.
Can be invoked through the river shortcut PrintScr:
`PrintScr` - Fullscreen screenshot
`Mod+PrintScr` - Region screenshot
`Shift+PrintScr` - Fullscreen screenshot and file upload
`Mod+Shift+PrintScr` - Region screenshot and file upload
Extended `sharefile` to take paths through stdin and make
use of `fd` if it is found on the system.
Added simple script `task-overdue-prompt` which checks for overdue tasks
(*not* tasks to be done 'today') and display a skull if there are any.
Intended for prompt use, it is currently still too slow to be used as
such. But there may still be uses other than that so it is included for now.
Updated notmuch to only be available for full-text search. Removed
complete afew configuration.
Added msmtp as mail sending agent.
Added structured neomutt configuration with custom bindings, built for
my personal gmail account, without any plaintext passwords revealed,
etc.
This is a reasonably well working mail setup,
which should provide a stable starting point for further refinements.
Additionally, added some functionality to `mail-check` script:
Allowed user to choose sync target for each run, by
passing in mbsync target (group/channel/..) as the argument.
Also, allows setting password file to use for script through env var,
and made imapfilter location less hard-coded to my system.
`tim` is intended as a quick support alias for timewarrior.
If invoked without any arguments, `tim` will print out a simple summary
of all tasks accomplished (for the day by default). It will also print
their ids for simple subsequent modification tasks.
If, however, invoked with additional arguments, `tim` will pass anything
along to timewarrior so anything happens as usual if invoked like this.
Thus, `tim` functions as a quick look into the day's timesheet or a
shorter alternative to the `timew` command.
For git versions that support it, the aliases will use the newer
`switch` instruction instead of `checkout` for its use cases.
Creating a new branch through `gcb` is for example done by
`git switch -c` instead of the older `git checkout -b`.
Additionally streamlined git version checking to be a little faster and
to unify its approach on posix sh, bash and zsh instead of utilizing
individual checking functions.
Added another building block program. This program will be required
going forward in other modules. `version_at_least` takes two version
numbers and returns true if the second is higher than the first.
That means primarily it is useful to check if a program fulfills a
minimum required version, e.g.: `version_at_least 2.1 $(my_program -v)`.
Will be primarily useful for git version checking in the near future.
It has a second possibility of checking for ordered version numbers
passed in but this is of less use. Check source for more information.
Timewarrior now looks for its data directory in `XDG_CONFIG_HOME`
instead of the home directory. This is a little better than nothing, but
does not separate the configuration and data files from each other yet.
Data *should* be lying in `XDG_DATA_HOME` but the data directory can not
be separated since it relies on a single env var `TIMEWARRIORDB`.
For the longest time, shell history ignore was set to the bash version
of the setting. Zsh uses both a different variable and a different
format to ignore various commands in the history.
Additionally increased the history size one order of magnitude,
so we really don't lose anything. Should still be fine for personal
computing work anyway.
Removed nagscreen informing of 2.6.0 news that would periodically tell
you about 'new' things in taskwarrior by telling it i already saw it.
Removed perviously added auto-sync function. Two reasons:
The individual additions/modifications in taskwarrior take longer if
they need to be communicated to a server at the end of every change.
And undo does not work at all if we are already syncing to a server
after every change.
That means wrong changes are also synced and become really hard to
remove again.
So, it seems easier to, for now, sync manually after some commands and
before leaving one workstation for another. Another method of auto-sync
could be implemented but I have not found an elegant way.
Moved pictures and videos back to home directory since they are, first,
not part of a 'media' collection and, second, on a different share to
my personal media assortment.
Removed the unused dunst pausing hotkey, and switched it for a search of
qutebrowser bookmarks, quickmarks, and history.
Key mapping is fn+<Search-Key> (F9 on my machine), and it will open in a
dmenu-like frame.
Results will open in the last opened browser instance, or open a new
one.
Made mail dir synchronization simpler - only a couple of important
directories will ever get synchronized to the local file system, but
still containing basically all important incoming mails.
Removed aerc and switched it for neomutt. aerc is very nice and needs
little to no configuration but neomutt is, as of this moment, just more
stable and mature. It opens quickly, never crashes, has a nice indexing
and quick e-mail handling behavior and is incredibly customizable.
Basically, once you put in some configuration effort, it is everything
aerc isn't --- and that is good, both have their reasons for existing.
It's just that mutt currently works better for me and will thus be the
e-mail reader of choice from now on.
Renamed fuzzy find functions to simpler and more logical names:
`fzf` to find and select anything recursing from current directory.
`fzfcd` to find and enter any directory recursively under current one.
`fzfhome` to locate and select anything from user's home directory.
Added shortcuts for above commands:
<space>f `fzf`
<space>c `fzfcd`
<space>F `grep` from current directory.
Added shortcuts to create and extract archives:
xx to extract selected archive.
xa to archive selected files, giving name of file under cursor.
xc to archive and compress selected files, giving name of file under
cursor.
Move ability to sync current pane to other one from mapping (c-y) to
command (`:syncme`). This is a command only used once in a while and
does not necessarily need its own full mapping. Additionally, having it
as an invocable command mirrors the built-in `:sync` command to do the
exact opposite - sync the other pane to the selected one.
Switch to fork since it's more actively developed and contains some
additional features. Primarily switched since it had quite a bit better
subtitle stream handling than the original for quite a while.
Added script to sh base package to allow checking for internet
connectivity. Checks both through system virtual filesystem and, as a
fallback, through pinging google dns.
Added a simple readme to sh module.
Fixed error in configuration file location for taskopen alias which put
the config file instead of the notes directory.
Now configuration file correctly resides in
$XDG_CONFIG_HOME/task/taskopenrc and notes dir is
$XDG_DATA_HOME/task/notes.
Notes can now correctly be created by doing `task <id> annotate Note`.
Bookmarks are already gitignored. While I don't mind the quickmarks
being public, I also don't think them being saved in this repo brings a
lot of pros - and they are massively out of date anyway.
I could think about integrating them on a private fork
https://shivering-isles.com/publish-your-work-while-keeping-a-private-fork
we will see.
Fixed script to only ask for password once before understanding that the
user does not want to provide it.
Since gpg seems to not differentiate between a *wrongly* entered
password and one entered not at all, we have to assume the user canceled
the password prompt and not bug him again until the next time the script
is invoked.
It will, however, at least notify the user that the process is aborted
in a quick notification message, so that if it was done on accident the
user will still know what's up.
