Merge branch '67-switch-organization-to-gnu-stow' into 'master'

Resolve "Switch organization to GNU stow"

Closes #67

See merge request marty-oehme/dotfiles!26

.config/i3status/config

@@ -1,111 +0,0 @@
-###############################################################################
-# ceerious i3 status config
-# see "man i3status" for documentation.
-#
-# It is important that this file is edited as UTF-8.
-# The following line should contain a sharp s:
-# ß
-# If the above line is not correctly displayed, fix your editor first!
-###############################################################################
-
-general {
-    interval = 1
-    colors = true
-    color_good = '#88b090'
-    color_degraded = '#ccdc90'
-    color_bad = '#e89393'
-}
-
-order += "volume master"
-order += "disk /"
-#order += "disk /data"
-#order += "disk /home"
-#order += "run_watch DHCP"
-#order += "ipv6"
-#order += "run_watch VPN"
-order += "wireless wlp4s0"
-#order += "ethernet enp5s0"
-order += "battery 0"
-order += "cpu_temperature 0"
-order += "cpu_usage 0"
-order += "load"
-order += "tztime local"
-
-#wireless wlp4s0 {
-#    format_up = "%quality  %essid %ip"
-#    format_down = ""
-#}
-
-#ethernet enp5s0 {
-#    # if you use %speed, i3status requires root privileges
-#    format_up = "%ip (%speed)"
-#    format_down = ""
-#}
-
-battery 0 {
-    format = "%status %percentage %remaining"
-    format_down = ""
-    last_full_capacity = true
-    integer_battery_capacity = true
-    low_threshold = 11
-    threshold_type = percentage
-    hide_seconds = true
-    status_chr = " "
-    status_bat = " "
-    status_unk = " "
-    status_full = " "
-}
-
-run_watch DHCP {
-    pidfile = "/var/run/dhclient*.pid"
-}
-
-run_watch VPN {
-    pidfile = "/var/run/vpnc/pid"
-}
-
-#%Y-%m-%d %H:%M:%S'
-tztime local {
-    format = " %d/%m/%Y   %H:%M"
-}
-
-load {
-    format = " %1min"
-}
-
-cpu_usage {
-    format = " %usage"
-}
-
-cpu_temperature 0 {
-    format = " %degrees°C"
-}
-
-disk "/" {
-    format = " %avail"
-    prefix_type	= custom
-    low_threshold = 20
-    threshold_type = percentage_avail
-}
-
-#disk "/data" {
-#    format = " %avail"
-#    prefix_type = custom
-#    low_threshold = 20
-#    threshold_type = percentage_avail
-#}
-
-#disk "/data" {
-#        format = " %avail"
-#        prefix_type = custom
-#        low_threshold = 20
-#        threshold_type = percentage_avail
-#}
-
-volume master {
-    format = "%volume  "
-    format_muted = " "
-    device = "default"
-    mixer = "Master"
-    mixer_idx = 0
-}

.config/papis/config

@@ -1,29 +0,0 @@
-[settings]
-default-library = academia
-
-opentool = xdg-open
-file-browser = vifm
-
-ref-format = {doc[author_list][0][surname]}{doc[year]}
-
-add-confirm = True
-add-name = {doc[author]}-{doc[title]}
-add-folder-name = {doc[author]}-{doc[title]}
-file-name = {doc[author]}_{doc[year]}_{doc[title]}
-add-file-name = {doc[author]}_{doc[year]}_{doc[title]}
-
-mark-header-format = {mark[value]}: {mark[name]}
-mark-opener-format = zathura --page {mark[value]}
-
-notes-name = notes.Rmd
-
-[tui]
-editmode = vi
-options_list.selected_margin_style = bg:ansiwhite fg:ansiblack
-options_list.unselected_margin_style = bg:ansiblack
-
-[test]
-dir = ~/documents/library
-
-[academia]
-dir = ~/Nextcloud/Library/academia

.config/shell/rc.d/dotfiles-version-control-commands.sh

@@ -1,25 +0,0 @@
-#!/bin/sh
-
-# enables git management through dot command
-alias dot='/usr/bin/git --git-dir=/home/marty/.dotfiles/ --work-tree=/home/marty'
-
-# The following commands are run on your git repo if you installed through the script
-# You can invoke them manually, but it's not recommended to keep them active in here.
-# Otherwise each time a shell starts up, *whatever directory you are in*, the commands
-# will be re-run.
-#
-## Make git assume the readme is not changing (essentially ignore it).
-#
-# This means you can safely remove the README.md file from your home dir
-# without git trying to delete it from the repository.
-# If you WANT to make changes to the README.md, you will have to make git
-# watch it again with the commented out command
-#
-# Read more: https://stackoverflow.com/questions/4308610/how-to-ignore-certain-files-in-git
-# and: https://stackoverflow.com/questions/653454/how-do-you-make-git-ignore-files-without-using-gitignore
-#
-#dot update-index --no-assume-unchanged README.md
-#dot update-index --assume-unchanged README.md
-
-## Make git not show untracked files (i.e. ALL other files in your home dir)
-#dot config status.showUntrackedFiles no

README.md

@@ -1,6 +1,52 @@
 # dotfiles Read-Me and Roadmap
 
-__ **THE BELOW README IS OUT OF DATE DO NOT FOLLOW ITS INSTALL INSTRUCTIONS** __
+
+## What's in these dotfiles
+* [x] vim configuration for simple programming tasks (especially go/typescript/python/bash) and prose
+* [x] academic workflow tools, to allow quick citation, pdf compilation, and preview
+* [x] simple, efficient polybar with package update notification, and spotify integration
+* [x] tmux session management through `tm` and `tl` tools
+* [x] quick terminal-wide color management through `sd`/`sD`/`sl`/`sL` commands, allowing two light and dark color-schemes
+* [x] many vim color-schemes with quick light/dark switching (`F8`) and theme switch (`<Space>+F8`)
+* [x] quick directory jumping using z, with fzf integration
+* [x] fzf integrations for bibtex citation, vim buffer management, most recently used switching, shell command history, and more
+
+## Quick-Start
+
+The dotfiles are based on a bare-repository residing in your home directory. To enable a faster usage of the dotfile git commands, a `dot` command is supplied which mirrors the usual `git` functionality, but solely applies it to your dotfiles.
+
+To install you need git on your system; to effectively use the dotfiles you should be using zsh (`chsh -s /bin/zsh` to switch your current user to the shell).
+
+Clone the bare repo, rename it and force a checkout with the following command - **NOTE** this WILL **OVERWRITE YOUR EXISTING FILES**, so have a look at what is contained beforehand.
+
+`git clone https://gitlab.com/marty-oehme/dotfiles.git df && cp -rf df/.git ~/.dotfiles && rm -rf df && cd ~ && git --git-dir=$HOME/.dotfiles/ checkout -f master`
+
+It will clone your dotfiles into the .dotfiles directory in your home directory and then force a checkout of the current master branch. Open a new terminal window and you should live in the dotfiles.
+
+## What's in these dotfiles
+
+* [x] vim configuration for simple programming tasks (especially go/typescript/python/bash) and prose
+* [x] academic workflow tools, to allow quick citation, pdf compilation, and preview
+* [x] simple, efficient polybar with package update notification, and spotify integration
+* [x] tmux session management through `tm` and `tl` tools
+* [x] quick terminal-wide color management through `sd`/`sD`/`sl`/`sL` commands, allowing two light and dark color-schemes
+* [x] many vim color-schemes with quick light/dark switching (`F8`) and theme switch (`<Space>+F8`)
+* [x] quick directory jumping using z, with fzf integration
+* [x] fzf integrations for bibtex citation, vim buffer management, most recently used switching, shell command history, and more
+
+## Notable Folders
+
+* generally, most configuration for applications follows the XDG specifications, keeping configuration in .config directory and supplementary files in .local/share directory
+* `.config/shell` contains all the general zsh/bash/sh configuration and environment variables usually contained in .zshrc/.zprofile/..; it is divided in login shell config (loginrc.d), general shell config (rc.d) and zsh specific (zsh.d)
+* `.config/rofi` contains additional scripts and a simple theming framework for rofi and should probably be migrated into the correct directories at some point
+* `.local/bin` contains most executable user scripts
+* `.local/share/pandoc` contains configuration for academic latex (pandoc, really) writing and is of interest if you want to use this functionality
+* `.xinitrc` is used for x initialization and program startup, customize to your needs
+* `.gitlab-ci.yml` is only used for simple CI code linting and static analysis on gitlab, can be deleted on individual deployments
+
+NOTE:
+
+**THE BELOW README IS OUT OF DATE DO NOT FOLLOW ITS INSTALL INSTRUCTIONS**
 
 At some point I will get around to updating it
 

bootstrap/autostow.sh

@@ -0,0 +1,100 @@
+#!/usr/bin/env bash
+#
+# autostow.sh
+#
+# Stow automatic symlinking script
+#
+# Invokes stow for every folder within this repository, and that's it.
+
+ignore="${AUTOSTOW_IGNORED_DIRS:-"bootstrap:assets"}"
+
+main() {
+  case "$1" in
+  -s | --stow)
+    have_stow
+    echo "Creating dotfile symlinks ................................................."
+    stow_dirs
+    echo "Done creating symlinks ...................................................."
+    exit 0
+    ;;
+  -d | --delete)
+    have_stow
+    echo "Removing dotfile symlinks ................................................."
+    unstow_dirs
+    echo "Done removing symlinks ...................................................."
+    exit 0
+    ;;
+  -v | --version)
+    printf "System bootstrap script.\n\n©Marty Oehme\n\nVersion: 0.2\n"
+    ;;
+  -h | --help | *)
+    usage
+    exit 0
+    ;;
+  esac
+  shift
+}
+
+stow_dirs() {
+  for d in */; do
+
+    if is_ignored "$d"; then
+      printf "ignoring %s\n" "$d"
+      continue
+    fi
+
+    printf "stowing %s\n" "$d"
+    stow -S -t ~ "$d"
+  done
+}
+
+unstow_dirs() {
+  for d in */; do
+
+    if is_ignored "$d"; then
+      printf "ignoring %s\n" "$d"
+      continue
+    fi
+
+    printf "unstowing %s\n" "$d"
+    stow -D -t ~ "$d"
+  done
+}
+
+is_ignored() {
+  IFS=":"
+  for ign in $ignore; do
+    if [ "$ign" == "$1" ] || [ "$ign/" == "$1" ]; then
+      return 0
+    fi
+  done
+  return 1
+}
+
+have_stow() {
+  if ! type stow >/dev/null 2>&1; then
+    printf "GNU stow needs to be installed for this script to function. Please install stow through your package manager.\n"
+    exit 1
+  fi
+}
+
+usage() {
+  printf "%s\n" \
+    "" \
+    " autostow.sh - Automatically stow your dotfiles." \
+    "               Uses GNU stow to set up automatic links to any dotfiles in subdirectories of this directory." \
+    "" \
+    " Usage: stow.sh -dhs" \
+    "" \
+    " Options:" \
+    "" \
+    "     -h     Print out this help." \
+    "" \
+    "     -s     Install dotfiles, by symlinking any directory found next to stow.sh using GNU stow." \
+    "" \
+    "     -d     Remove dotfiles, by unlinking any directory found next to stow.sh using GNU stow." \
+    "" \
+    ""
+}
+
+main "$@"

bootstrap/install_packages.sh

@@ -7,13 +7,15 @@
 # DESCRIPTION:  Display usage information for this script.
 # PARAMETERS:   see usage function
 #==============================================================================
+packages="${BOOTSTRAP_PACKAGES:-packages.csv}"
+
 main() {
   local cmd=""
   local ret=0
 
   case "$1" in
   -v | --version)
-    printf "Package bootstrap script.\n\n©Marty Oehme\n\nVersion: 0.1\n"
+    printf "Package bootstrap script.\n\n©Marty Oehme\n\nVersion: 0.3\n"
     ;;
   -h | --help)
     printf "Usage: install [-f|--force][-v|--version][-h|--help]\n\n-f     Do not ask for any confirmations but force update and installation.\n"
@@ -58,9 +60,9 @@ update_repos() {
 install_packages() {
   unattended="$1"
   if "$unattended"; then
-    yay -Squ --noconfirm --needed - <packages.csv
+    yay -Squ --noconfirm --needed - <"$packages"
   else
-    yay -Su --needed - <packages.csv
+    yay -Su --needed - <"$packages"
   fi
 }
 
@@ -71,12 +73,11 @@ check_consent() {
     echo "Exiting."
     exit
   fi
-
 }
 
 install() {
   unattended=$1
-  echo "Beginning boostrap ........................................................"
+  echo "Beginning package bootstrap ..............................................."
   if ! "$unattended"; then
     check_consent
   fi

bootstrap/packages.csv

@@ -4,10 +4,10 @@ bash
 bibtool
 bison
 bzip2
-chromium
 dhcpcd
 dialog
 docker
+dunst
 exa
 fasd
 feh
@@ -15,26 +15,23 @@ flashfocus-git
 fzf
 gawk
 git
+git-lfs
 gnome-keyring
 gopass
 grep
 gzip
 hugo
 i3-gaps
-i3blocks
 i3lock
-i3status
 jabref-latest
+jpdftweak
 keybase-bin
 less
+libnotify
 libtool
 littler
 logrotate
-mopidy
+lynx
-mopidy-podcast
-mopidy-scrobbler
-mopidy-spotify
-mopidy-spotify-tunigo
 mosh
 mpv
 nano
@@ -42,6 +39,7 @@ neovim
 nerd-fonts-fira-code
 nerd-fonts-iosevka
 nextcloud-client
+ntfs-3g
 nvidia
 nvidia-utils
 openssh
@@ -49,9 +47,8 @@ os-prober
 pacman
 pandoc
 pandoc-citeproc
-papis
 picom
-pkgconf
+playerctl
 polybar
 pulseaudio
 pulseaudio-alsa
@@ -59,7 +56,6 @@ pulsemixer
 python-pip
 python-pybtex
 python-pynvim
-python-pywal
 qutebrowser
 r
 redshift
@@ -70,8 +66,9 @@ rofi-dmenu
 rofi-greenclip
 rofimoji
 scrot
-shellcheck-static
+spotify
-shfmt
+sshfs
+stow
 surfraw
 sxhkd
 tar
@@ -100,7 +97,6 @@ unzip
 vagrant
 vifm
 virtualbox
-weechat
 wget
 which
 xcape

install.sh

@@ -0,0 +1,67 @@
+#!/usr/bin/env bash
+#
+# install.sh
+#
+# Installs dotfiles and packages for my setup
+#
+# Will first install yay, then all my used packages (read from bootstrap/packages.csv)
+#
+# Will symlink all my dotfiles into their correct places using autostow.sh
+
+main() {
+  local cmd=""
+  local ret=0
+
+  case "$1" in
+  -v | --version)
+    printf "Personal system bootstrap script.\n\n©Marty Oehme\n\nVersion: 0.1\n"
+    ;;
+  -h | --help)
+    printf "Usage: install [-f|--force][-v|--version][-h|--help]\n\n-f     Do not ask for any confirmations but force update and installation.\n"
+    ;;
+  -f | --force)
+    install true
+    ;;
+  *)
+    install false
+    ;;
+  esac
+  shift
+
+  $cmd "$@"
+  ret=$((ret + $?))
+  exit $ret
+}
+
+check_consent() {
+  echo "This will take a while, install many packages and link dotfiles all over the place. Proceed [y/N]?"
+  read -r yes
+  if [[ "$yes" != y* ]]; then
+    echo "Exiting."
+    exit
+  fi
+}
+
+install() {
+  unattended=$1
+  if ! "$unattended"; then
+    check_consent
+  fi
+  echo "====================== BEGINNING INSTALLATION ============================="
+  if ! "$unattended"; then
+    export BOOTSTRAP_PACKAGES="bootstrap/packages.csv"
+    ./bootstrap/install_packages.sh
+  else
+    export BOOTSTRAP_PACKAGES="bootstrap/packages.csv"
+    ./bootstrap/install_packages.sh -f
+  fi
+  unset BOOTSTRAP_PACKAGES
+
+  echo "=================== BEGINNING DOTFILE MANAGEMENT =========================="
+  ./bootstrap/autostow.sh -s
+
+  echo "====================== INSTALLATION FINISHED =============================="
+
+}
+
+main "$@"

nvim/.config/nvim/colo.vim

@@ -0,0 +1 @@
+colo nord

nvim/.config/nvim/plugin/compiledoc.vim

@@ -0,0 +1,22 @@
+function CompileDoc()
+  :execute(":w!")
+  :execute(":!compile \"%\"")
+endfunction
+
+function CompileDocNoOutput()
+  :execute(":w!")
+  :execute(":silent !compile \"%\"")
+endfunction
+
+function CompiledOpen()
+  :execute(":silent !open-compiled \"%\"")
+endfunction
+
+function CompileDocAndOpen()
+  call CompileDocNoOutput()
+  call CompiledOpen()
+endfunction
+
+command CompileDoc call CompileDoc()
+command CompileOpen call CompiledOpen()
+command CompileDocAndOpen call CompileDocAndOpen()

nvim/.config/nvim/watch.lua

@@ -0,0 +1,16 @@
+local w = vim.loop.new_fs_event()
+local function on_change(err, fname, status)
+  -- Do work...
+  vim.api.nvim_command('checktime')
+  -- Debounce: stop/start.
+  w:stop()
+  watch_file(fname)
+end
+function watch_file(fname)
+  local fullpath = vim.api.nvim_call_function(
+    'fnamemodify', {fname, ':p'})
+  w:start(fullpath, {}, vim.schedule_wrap(function(...)
+  on_change(...) end))
+end
+vim.api.nvim_command(
+  "command! -nargs=1 Watch call luaeval('watch_file(_A)', expand('<args>'))")

polybar/.config/polybar/exampleconf

@@ -0,0 +1,403 @@
+[colors]
+;background = ${xrdb:color0:#222}
+background = #222
+background-alt = #444
+;foreground = ${xrdb:color7:#222}
+foreground = #dfdfdf
+foreground-alt = #555
+primary = #ffb52a
+secondary = #e60053
+alert = #bd2c40
+
+[bar/example]
+;monitor = ${env:MONITOR:HDMI-1}
+width = 100%
+height = 27
+;offset-x = 1%
+;offset-y = 1%
+radius = 6.0
+fixed-center = false
+
+background = ${colors.background}
+foreground = ${colors.foreground}
+
+line-size = 3
+line-color = #f00
+
+border-size = 0
+border-color = #00000000
+
+padding-left = 15
+padding-right = 15
+
+module-margin-left = 1
+module-margin-right = 2
+
+font-0 = fixed:pixelsize=10;1
+font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
+font-2 = siji:pixelsize=10;1
+
+modules-left = bspwm i3
+modules-center = mpd
+modules-right = filesystem xbacklight alsa pulseaudio xkeyboard memory cpu wlan eth battery temperature powermenu date
+
+tray-position = right
+tray-padding = 2
+tray-background = #0063ff
+
+;wm-restack = bspwm
+;wm-restack = i3
+
+;override-redirect = true
+
+;scroll-up = bspwm-desknext
+;scroll-down = bspwm-deskprev
+
+scroll-up = i3wm-wsnext
+scroll-down = i3wm-wsprev
+
+cursor-click = pointer
+cursor-scroll = ns-resize
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:30:...%
+
+[module/xkeyboard]
+type = internal/xkeyboard
+blacklist-0 = num lock
+
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-prefix-underline = ${colors.secondary}
+
+label-layout = %layout%
+label-layout-underline = ${colors.secondary}
+
+label-indicator-padding = 2
+label-indicator-margin = 1
+label-indicator-background = ${colors.secondary}
+label-indicator-underline = ${colors.secondary}
+
+[module/filesystem]
+type = internal/fs
+interval = 25
+
+mount-0 = /
+
+label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
+label-unmounted = %mountpoint% not mounted
+label-unmounted-foreground = ${colors.foreground-alt}
+
+[module/bspwm]
+type = internal/bspwm
+
+label-focused = %index%
+label-focused-background = ${colors.background-alt}
+label-focused-underline= ${colors.primary}
+label-focused-padding = 2
+
+label-occupied = %index%
+label-occupied-padding = 2
+
+label-urgent = %index%!
+label-urgent-background = ${colors.alert}
+label-urgent-padding = 2
+
+label-empty = %index%
+label-empty-foreground = ${colors.foreground-alt}
+label-empty-padding = 2
+
+; Separator in between workspaces
+; label-separator = |
+
+[module/i3]
+type = internal/i3
+format = <label-state> <label-mode>
+index-sort = true
+wrapping-scroll = false
+
+; Only show workspaces on the same output as the bar
+;pin-workspaces = true
+
+label-mode-padding = 2
+label-mode-foreground = #000
+label-mode-background = ${colors.primary}
+
+; focused = Active workspace on focused monitor
+label-focused = %index%
+label-focused-background = ${colors.background-alt}
+label-focused-underline= ${colors.primary}
+label-focused-padding = 2
+
+; unfocused = Inactive workspace on any monitor
+label-unfocused = %index%
+label-unfocused-padding = 2
+
+; visible = Active workspace on unfocused monitor
+label-visible = %index%
+label-visible-background = ${self.label-focused-background}
+label-visible-underline = ${self.label-focused-underline}
+label-visible-padding = ${self.label-focused-padding}
+
+; urgent = Workspace with urgency hint set
+label-urgent = %index%
+label-urgent-background = ${colors.alert}
+label-urgent-padding = 2
+
+; Separator in between workspaces
+; label-separator = |
+
+
+[module/mpd]
+type = internal/mpd
+format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
+
+icon-prev = 
+icon-stop = 
+icon-play = 
+icon-pause = 
+icon-next = 
+
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+[module/xbacklight]
+type = internal/xbacklight
+
+format = <label> <bar>
+label = BL
+
+bar-width = 10
+bar-indicator = |
+bar-indicator-foreground = #fff
+bar-indicator-font = 2
+bar-fill = ─
+bar-fill-font = 2
+bar-fill-foreground = #9f78e1
+bar-empty = ─
+bar-empty-font = 2
+bar-empty-foreground = ${colors.foreground-alt}
+
+[module/backlight-acpi]
+inherit = module/xbacklight
+type = internal/backlight
+card = intel_backlight
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #f90000
+label = %percentage:2%%
+
+[module/memory]
+type = internal/memory
+interval = 2
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #4bffdc
+label = %percentage_used%%
+
+[module/wlan]
+type = internal/network
+interface = wlp0s29u1u1
+interval = 3.0
+
+format-connected = <ramp-signal> <label-connected>
+format-connected-underline = #9f78e1
+label-connected = %essid%
+
+format-disconnected =
+;format-disconnected = <label-disconnected>
+;format-disconnected-underline = ${self.format-connected-underline}
+;label-disconnected = %ifname% disconnected
+;label-disconnected-foreground = ${colors.foreground-alt}
+
+ramp-signal-0 = 
+ramp-signal-1 = 
+ramp-signal-2 = 
+ramp-signal-3 = 
+ramp-signal-4 = 
+ramp-signal-foreground = ${colors.foreground-alt}
+
+[module/eth]
+type = internal/network
+interface = enp6s0
+interval = 3.0
+
+format-connected-underline = #55aa55
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.foreground-alt}
+label-connected = %local_ip%
+
+format-disconnected =
+;format-disconnected = <label-disconnected>
+;format-disconnected-underline = ${self.format-connected-underline}
+;label-disconnected = %ifname% disconnected
+;label-disconnected-foreground = ${colors.foreground-alt}
+
+[module/date]
+type = internal/date
+interval = 5
+
+date =
+date-alt = " %Y-%m-%d"
+
+time = %H:%M
+time-alt = %H:%M:%S
+
+format-prefix = 
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #0a6cf5
+
+label = %date% %time%
+
+[module/pulseaudio]
+type = internal/pulseaudio
+
+format-volume = <label-volume> <bar-volume>
+label-volume = VOL %percentage%%
+label-volume-foreground = ${root.foreground}
+
+label-muted = 🔇 muted
+label-muted-foreground = #666
+
+bar-volume-width = 10
+bar-volume-foreground-0 = #55aa55
+bar-volume-foreground-1 = #55aa55
+bar-volume-foreground-2 = #55aa55
+bar-volume-foreground-3 = #55aa55
+bar-volume-foreground-4 = #55aa55
+bar-volume-foreground-5 = #f5a70a
+bar-volume-foreground-6 = #ff5555
+bar-volume-gradient = false
+bar-volume-indicator = |
+bar-volume-indicator-font = 2
+bar-volume-fill = ─
+bar-volume-fill-font = 2
+bar-volume-empty = ─
+bar-volume-empty-font = 2
+bar-volume-empty-foreground = ${colors.foreground-alt}
+
+[module/alsa]
+type = internal/alsa
+
+format-volume = <label-volume> <bar-volume>
+label-volume = VOL
+label-volume-foreground = ${root.foreground}
+
+format-muted-prefix = " "
+format-muted-foreground = ${colors.foreground-alt}
+label-muted = sound muted
+
+bar-volume-width = 10
+bar-volume-foreground-0 = #55aa55
+bar-volume-foreground-1 = #55aa55
+bar-volume-foreground-2 = #55aa55
+bar-volume-foreground-3 = #55aa55
+bar-volume-foreground-4 = #55aa55
+bar-volume-foreground-5 = #f5a70a
+bar-volume-foreground-6 = #ff5555
+bar-volume-gradient = false
+bar-volume-indicator = |
+bar-volume-indicator-font = 2
+bar-volume-fill = ─
+bar-volume-fill-font = 2
+bar-volume-empty = ─
+bar-volume-empty-font = 2
+bar-volume-empty-foreground = ${colors.foreground-alt}
+
+[module/battery]
+type = internal/battery
+battery = BAT0
+adapter = ADP1
+full-at = 98
+
+format-charging = <animation-charging> <label-charging>
+format-charging-underline = #ffb52a
+
+format-discharging = <animation-discharging> <label-discharging>
+format-discharging-underline = ${self.format-charging-underline}
+
+format-full-prefix = " "
+format-full-prefix-foreground = ${colors.foreground-alt}
+format-full-underline = ${self.format-charging-underline}
+
+ramp-capacity-0 = 
+ramp-capacity-1 = 
+ramp-capacity-2 = 
+ramp-capacity-foreground = ${colors.foreground-alt}
+
+animation-charging-0 = 
+animation-charging-1 = 
+animation-charging-2 = 
+animation-charging-foreground = ${colors.foreground-alt}
+animation-charging-framerate = 750
+
+animation-discharging-0 = 
+animation-discharging-1 = 
+animation-discharging-2 = 
+animation-discharging-foreground = ${colors.foreground-alt}
+animation-discharging-framerate = 750
+
+[module/temperature]
+type = internal/temperature
+thermal-zone = 0
+warn-temperature = 60
+
+format = <ramp> <label>
+format-underline = #f50a4d
+format-warn = <ramp> <label-warn>
+format-warn-underline = ${self.format-underline}
+
+label = %temperature-c%
+label-warn = %temperature-c%
+label-warn-foreground = ${colors.secondary}
+
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-foreground = ${colors.foreground-alt}
+
+[module/powermenu]
+type = custom/menu
+
+expand-right = true
+
+format-spacing = 1
+
+label-open = 
+label-open-foreground = ${colors.secondary}
+label-close =  cancel
+label-close-foreground = ${colors.secondary}
+label-separator = |
+label-separator-foreground = ${colors.foreground-alt}
+
+menu-0-0 = reboot
+menu-0-0-exec = menu-open-1
+menu-0-1 = power off
+menu-0-1-exec = menu-open-2
+
+menu-1-0 = cancel
+menu-1-0-exec = menu-open-0
+menu-1-1 = reboot
+menu-1-1-exec = sudo reboot
+
+menu-2-0 = power off
+menu-2-0-exec = sudo poweroff
+menu-2-1 = cancel
+menu-2-1-exec = menu-open-0
+
+[settings]
+screenchange-reload = true
+;compositing-background = xor
+;compositing-background = screen
+;compositing-foreground = source
+;compositing-border = over
+;pseudo-transparency = false
+
+[global/wm]
+margin-top = 5
+margin-bottom = 5

qutebrowser/.config/qutebrowser/quickmarks

@@ -0,0 +1,9 @@
+dot https://gitlab.com/marty-oehme/dotfiles
+l https://links.martyoeh.me/
+todo https://todoist.com/app?lang=de#start
+mail https://mail.google.com/mail/u/0/#inbox
+rss https://rss.martyoeh.me/
+files http://files.martyoeh.me/
+read https://read.martyoeh.me/
+arch https://wiki.archlinux.org/
+toggl https://toggl.com/app/timer

rofi/.config/rofi/modes/gopass

@@ -0,0 +1,73 @@
+#!/usr/bin/env sh
+# Custom key bindings do not work in script-mode, use a wrapper instead
+# Script at .local/bin/rofi-gopass
+OLD_GOPASS_GPG_OPTS="$GOPASS_GPG_OPTS"
+
+break_out() {
+  if [ "$1" -eq 1 ]; then
+    exit
+  fi
+}
+
+has_xclip() {
+  if (type xclip >/dev/null 2>&1); then
+    printf "Your system does not appear to support pasting to clipboard via xclip."
+    exit 1
+  else
+    return 0
+  fi
+}
+
+to_clipboard() {
+  has_xclip
+  value="$(gopass show "$1" "$2")"
+  printf "%s" "$value" | xclip -selection clipboard
+  notify-send "Password" "Copied pass for $2 to clipboard.\n"
+  exit
+}
+
+show_secrets() {
+  printf "%s" "$(gopass ls -fo)"
+}
+
+# get_key() {
+#   return echo "$*" | gpg --passphrase-fd 0 --pinentry-mode loopback --batch --export-secret-keys 2>&1
+# }
+
+# check_gpg_key() {
+#   check_keyphrase=$(echo "$*" | gpg --passphrase-fd 0 --pinentry-mode loopback --batch --export-secret-keys 2>&1)
+#   if echo "$check_keyphrase" | grep -q -e '.*<.*@.*>'; then
+#     printf "\x00prompt\x1fLogin> \n"
+#     show_secrets
+#   elif echo "$check_keyphrase" | grep -q -e "can't get input" - || echo "$check_keyphrase" | grep -q -e "error receiving key" -; then
+#     printf "\x00prompt\x1fMaster Passphrase> \n"
+#     printf "%s" "$check_keyphrase"
+#   else
+#     echo "passphrase successfully input, $check_keyphrase"
+#   fi
+# }
+
+# has_selected_login() {
+#   echo "this is passed to ls: $*"
+#   echo "grep reveals: $(gopass ls -f | grep -e "$*" -)"
+#   if grep "$(gopass ls -f | grep -q -e "$*" -)"; then
+#     echo "ls found something"
+#     true
+#   else
+#     false
+#   fi
+# }
+
+# if [ -z "$*" ]; then
+#   check_gpg_key "$*"
+# elif has_selected_login "$*"; then
+#   echo "has selected login $*"
+# else
+#   check_gpg_key "$*"
+# fi
+
+main() {
+  show_secrets
+}
+
+main

rofi/.config/rofi/modes/rofi-colors

@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+
+rofi_command="rofi"
+
+original_args=("$@")
+for ((i = 0; i <= "${#original_args[@]}"; i++)); do
+  if [ "${original_args[i]}" == "-color" ]; then
+    for ((j = 0; j <= "${#original_args[@]}"; j++)); do
+      if [ "${original_args[j]}" == "-theme" ]; then
+        echo "with theme: $i : ${original_args[i]} ${original_args[i + 1]}"
+      fi
+    done
+  fi
+done
+
+# for ((index = 0; index <= ${#lines_ary[@]}; index++)); do
+#   if [ "${lines_ary[index]}" == "Release:" ]; then
+#     echo "${lines_ary[index + 1]}"
+#   fi
+# done
+
+$rofi_command "${original_args[@]}"
+
+# if [ -z "${color}" ]; then
+#   command rofi "${original_args[@]}"
+# fi
+
+# echo "color = ${color}"

rofi/.config/rofi/modes/scratch

@@ -0,0 +1,209 @@
+#!/bin/bash
+
+# rofi wrapper. Add custom settings here.
+_rofi () {
+	rofi -dmenu -no-auto-select -i "$@"
+}
+
+# default settings
+backend=ydotool
+dotool_delay=200
+daemon_wait=2
+autotype_delay=2
+key_autotype="Return"
+key_usertype="Alt+2"
+key_passtype="Alt+3"
+key_actions="Alt+a"
+key_clipboard="Alt+1"
+key_fieldtype="Return"
+
+# read config file
+get_config_file () {
+	configs=("$ROFI_PASS_CONFIG"
+		"$HOME/.config/rofi-pass/rofi-gopass.conf"
+		"/etc/rofi-gopass.conf")
+
+	# return the first config file with a valid path
+	for config in "${configs[@]}"; do
+		# '! -z' is needed in case ROFI_PASS_CONFIG is not set
+		if [[ ! -z "${config}" && -f "${config}" ]]; then
+			printf "%s" "$config"
+			return
+		fi
+	done
+}
+
+# Make sure ESC will always end the programm.
+# Call this function with "exit_check $?" after each rofi call.
+exit_check () {
+	exit_value=$1
+	if [[ "${exit_value}" == "1" ]]; then
+		exit
+	fi
+}
+
+clipboard () {
+	local entry
+	local key
+	local value
+	entry="${1}"
+	key="${2}"
+	value="$(gopass show "${entry}" "${key}")"
+	printf '%s' "${value}" | xclip -sel clip
+	notify-send "rofi-gopass" "Copied ${key} to clipboard\nClearing in 45 seconds."
+	(sleep 45; printf '%s' "" | xclip; printf '%s' "" | xclip -selection clipboard | notify-send "rofi-gopass" "Clipboard cleared") &
+	exit
+}
+
+_ydotoold () {
+    if ! pgrep -x "ydotoold" >/dev/null; then
+    	# ydotoold blocks the terminal, so we need to background it.
+    	# Sadly this way we never know when the process finished starting up.
+    	# Until ydotoold receives proper daemonizing we add a sleep value here.
+        ydotoold&
+        sleep "${daemon_wait}"
+    fi
+}
+
+_dotool () {
+	local mode
+	local key
+	mode="${1}"
+	key="${2:-null}"
+	case "${mode}" in
+		"type")
+			case "${backend}" in
+				"xdotool") xdotool type --delay "${dotool_delay}" --file - ;;
+				"ydotool") _ydotoold; ydotool type --delay "${dotool_delay}" --file - ;;
+			esac ;;
+		"key")
+			case "${backend}" in
+				"xdotool") xdotool key "${key}" ;;
+				"ydotool") _ydotoold; ydotool key "${key}" ;;
+			esac ;;
+	esac
+}
+
+list_passwords () {
+	gopass list --flat
+}
+
+
+autopass () {
+	local entry
+	local autotype
+	entry="${1}"
+	autotype="$(gopass show "${entry}" autotype)"
+	autotype="${autotype:-user :tab pass}"
+
+    for word in ${autotype}; do
+        case "$word" in
+            ":tab") _dotool key Tab;;
+            ":space") _dotool key " ";;
+            ":delay") sleep "${autotype_delay}";;
+            ":enter") _dotool key enter;;
+            "pass") printf '%s' "$(gopass show --password "${entry}")" | _dotool type ;;
+            *) printf '%s' "$(gopass show "${entry}" "${word}")" | _dotool type ;;
+        esac
+    done
+}
+
+list_keys () {
+	# gopass has no option to only list keys, so we need to build the list ourselves.
+	local entry
+	local keys
+	entry="${1}"
+	keys="$(gopass show "${entry}")"
+	printf '%s\n' "${keys}" | while read -r line; do
+		if [[ "${line}" == *": "* ]]; then
+			printf '%s\n' "${line%: *}"
+		fi
+	done
+}
+
+edit_key () {
+	local entry
+	local keys
+	entry="${1}"
+	keys="$(list_keys "${entry}")"
+	key_name=$(printf '%s\n' "${keys}" | _rofi -mesg "Enter new key or chose existing one")
+	exit_check $?
+	value_name=$(printf '%s' "" | _rofi -mesg "Enter Value for key \"${key_name}\"")
+	exit_check $?
+	if [[ -z "${key_name}" ]]; then
+		printf '%s' "${value_name}" | gopass insert -a "${entry}" "${key_name}"
+	else
+		printf '%s' "${value_name}" | gopass insert "${entry}" "${key_name}"
+	fi
+}
+
+# For dangerous operations call this function first. You can provide a message as argument.
+# Example: confirm "Are you sure you want to delete entry?"
+confirm () {
+	local message
+	message="${1}"
+	confirm_content=(
+		"Yes"
+		"No")
+
+	confirm_menu=$(printf '%s\n' "${confirm_content[@]}" | _rofi -mesg "${message}")
+	exit_check $?
+	case "${confirm_menu}" in
+		"Yes") : ;;
+		"No") exit ;;
+	esac
+}
+
+custom_type () {
+	local entry
+	local keys
+	entry="${1}"
+	keys="$(list_keys "${entry}")"
+	key_name=$(printf '%s\n' "${keys}" | _rofi -kb-accept-entry "" -no-custom -kb-custom-1 "${key_clipboard}" -kb-custom-2 "${key_fieldtype}" -mesg "${key_clipboard}: Copy to Clipboard | ${key_fieldtype}: Type Field")
+	local exit_value=$?
+	exit_check "${exit_value}"
+	case "${exit_value}" in
+		"10") clipboard "${entry}" "${key_name}" ;;
+		"11") printf '%s' "$(gopass show "${entry}" "${key_name}")" | _dotool type; exit ;;
+	esac
+}
+
+do_menu () {
+	local entry
+	entry="${1}"
+	action_menu_content=(
+		"< Go Back"
+		"---"
+		"Show Fields"
+		"Add/Edit Keys"
+		"Generate New Password"
+		"Delete Entry"
+	)
+
+	action_menu="$(printf '%s\n' "${action_menu_content[@]}" | _rofi -no-custom -mesg "Selected Entry: ${entry}" -p '> ')"
+	exit_value=$?
+	exit_check "${exit_value}"
+
+	case "${action_menu}" in
+		"< Go Back") main ;;
+		"Show Fields") custom_type "${entry}" ;;
+		"Add/Edit Keys") edit_key "${entry}" ;;
+		"Delete Entry") confirm "Delete ${entry}?"; gopass rm -f "${entry}" ;;
+		"Generate New Password") confirm "Generate a new password for ${entry}?"; gopass generate -f "${entry}" ;;
+	esac
+}
+
+
+main () {
+	entry="$(list_passwords | _rofi -kb-accept-entry "" -kb-custom-1 "${key_autotype}" -kb-custom-2 "${key_usertype}" -kb-custom-3 "${key_passtype}" -kb-custom-4 "${key_actions}" -mesg "${key_autotype}: Autotype | ${key_usertype}: Type User | ${key_passtype}: Type Pass | ${key_actions}: More Actions")"
+	exit_value=$?
+	exit_check "${exit_value}"
+	case "${exit_value}" in
+		"10") autopass "${entry}"; exit ;;
+		"11") printf '%s' "$(gopass show "${entry}" user)" | _dotool type; exit ;;
+		"12") printf '%s' "$(gopass show --password "${entry}")" | _dotool type; exit ;
+	esac
+	do_menu "${entry}"
+}
+
+main

rofi/.config/rofi/modes/test

@@ -0,0 +1,99 @@
+#!/usr/bin/env sh
+
+# POSIX COMPLIANT EXAMPLE ROFI MODE SCRIPT
+
+#### Options ###
+power_off_btn=""
+reboot_btn=""
+lock_btn=""
+suspend_btn="鈴"
+logout_btn=""
+
+# find out what the user has input
+# pad both values with a simple p in front
+# if query is empty it tries to compare nothing with quit otherwise
+# i.e. the [ operator, which will error out
+if [ p"$*" = p"quit" ]; then
+  exit 0
+fi
+
+if [ x"$*" = x"noot" ]; then
+  rofi-powermenu
+  exit 0
+fi
+
+# another way to see what the user has input
+# grep -a since it assumes with our nullcodes etc that this is a binary file
+# grep -o to only leave the things we grep for
+case $(echo "$*" | grep -a -o -e "Shutdown" -e "Reboot" -e "Lockscreen" -e "Logout" -e "Suspend") in
+"Shutdown")
+  # do shutdown
+  ;;
+"Reboot")
+  # do shutdown
+  ;;
+"Lockscreen")
+  # do shutdown
+  ;;
+"Logout")
+  # do shutdown
+  ;;
+"Suspend")
+  # do shutdown
+  ;;
+esac
+
+if [ "$@" ]; then
+  # Override the previously set prompt.
+  printf "\x00prompt\x1fChange prompt\n"
+  for a in 1 2 3 4 5 6 7 8 9 10; do
+    echo "$a"
+  done
+  echo "quit"
+else
+
+  printf "\x00prompt\x1fPower> \n"
+  # we can use pango markup to hide text which we can then search. Neat!
+  printf "\0markup-rows\x1ftrue\n"
+  # echo -en "\0urgent\x1f0,2\n"
+  # echo -en "\0active\x1f1\n"
+  # echo -en "\0message\x1fSpecial <b>bold</b>message\n"
+
+  printf "aap\0icon\x1ffolder\n"
+  printf "<!-- Shutdown Poweroff --> %s\0icon\x1fstart-here\n" "$power_off_btn"
+  printf "<!-- Reboot Restart --> %s\n" "$reboot_btn"
+  printf "<!-- Lockscreen --> %s\n" "$lock_btn"
+  printf "<!-- Suspend Sleep --> %s\n" "$suspend_btn"
+  printf "<!-- Exit X Logout --> %s\n" "$logout_btn"
+  echo "<b>Bold</b>"
+  echo "quit"
+fi
+
+##!/usr/bin/env sh
+
+#### Options ###
+#power_off=""
+#reboot=""
+#lock=""
+#suspend_btn="鈴"
+#logout_btn=""
+## Variable passed to rofi
+
+#chosen="$(printf "%s\n%s\n%s\n%s\n%s" "$power_off" "$reboot" "$lock" "$suspend_btn" "$logout_btn" | $rofi_command -dmenu -selected-row 2)"
+#case $chosen in
+#$power_off)
+#  systemctl poweroff
+#  ;;
+#$reboot)
+#  systemctl reboot
+#  ;;
+#$lock)
+#  lockscreen
+#  ;;
+#$suspend_btn)
+#  systemctl suspend
+#  ;;
+#$logout_btn)
+#  i3-msg exit
+#  ;;
+#esac